Instructions / Assembly

DocaPole 30ft Camera Adapter Kit Assembly

Instructions

1. To adjust extension pole length, raise thumb levers

and pull out pole segments to desired length, then

lower thumb levers to lock into place

2. Use the plastic hinge tip as needed to adjust the angle

of the desired attachment. Simply screw the female

plastic hinge tip directly onto the male metal tip of

the pole, then screw your attachment onto the

angled hinge tip (make sure it is locked into place by

turning the dial on the side).

3. Screw the Camera Adapter onto the Metal Tip of the

Pole. If you need the attachment to be at an angle,

use the included plastic Hinge Tip and adjust the

angle as needed

4. Use the included allen wrench to tighten the set

screw on the side of the adapter, and attach your

camera/flash/microphone

5. Enjoy your DocaPole and Camera Adapter Kit!

PAGE 1
DocaPole 30ft Camera Adapter Kit Assembly Instructions 1. To adjust extension pole length, raise thumb levers and pull out pole segments to desired length, then lower thumb levers to lock into place 2. Use the plastic hinge tip as needed to adjust the angle of the desired attachment. Simply screw the female plastic hinge tip directly onto the male metal tip of the pole, then screw your attachment onto the angled hinge tip (make sure it is locked into place by turning the dial on the side). 3.