Technical Specs

switch off the headphone or disconnect it from
the Bluetooth menu of your device.
Reconnect the Headphone
To reconnect to the phone or Bluetooth device
that you last used with it, switch on the
headphones, or remake the connection in the
Bluetooth menu of your device.
Wired Connection
You can also use the headphones with a wired
connection. Simply connect the headphones to
your device with the 3.5mm AUX cable provided.
Inserting the audio cable plug will disable the
wireless functionality.
Charging
Plug the charging cable into the USB-C port
under the left ear-cap of the headphone. Plug the
other end into a USB port on your computer or
other device made for USB charging. The
indicator light will turn red while charging. Once
fully charged, the indicator light will turn blue. The
charge time is approximately 2.5 hours on an
empty battery.
Technical Specification:
• Bluetooth version: 5.0
• Working range: up to 10m (33ft.)
• Driver unit: 40mm
• Impedance: 32Ω±15%
• Headset Sensitivity：100±3dB(@ 1kHz)
• Frequency response: 20Hz to 20kHz
• Built -in Mic for hands-free function
• Input: DC 5V/500mA
• Battery: Rechargeable Lithium ion battery;
3.7V, 180mAh
• Charging time: 2.5 hours
• Playing time: 30 hours with 50% Volume
• Standby time: ≥50 hours
• Dimensions: 170X200X75 mm [LXWXH]
• Weight: 165g
• Use USBC cable to charge
Caution
1. Please turn off the headset and put it into box
to avoid damage, scratches or bracket
deformation when long time no use. In order
to prolong the battery service life, please
charge every 3 months.
2. Please charge at first if the headset is left
unused for long time.
3. The battery of headset is original and please
don’t change it by yourself.
4. Please keep the headset under dry place.
5. Please don’t put this product into the
environment with temperature over than 60
or into fire to avoid battery blast accident.
6. Please don’t bent or twist the bracket to avoid
deformation.
7. Please don’t tear down ear-cushions by
un-professional person.
8. Don’t adjust the volume to a very high level
and continued play. If tinnitus occurs, please
turn the volume down or stop playing, do not
turn the volume up suddenly. Please slowly
turn up the volume to avoid hearing damage
caused by high volume.
9. Do not use the headset in dangerous place or
place where cannot hear the outside sound.
FCC COMPLIANCE
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interfer-
ence, and
2. This device must accept any interference
received, including interference that may
cause undesired operation.
WARNING! Changes or modifications to this unit
not expressly approved by the party responsible
for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful interfer-
ence in a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in accord-
ance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the
equipment and receiver
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected
• Consult the dealer or an experienced radio /
TV technician for help
Please read this manual carefully before using the headphones as this contains important safety information.
Please keep the headphones away from children.
INSTRUCTIONS
WIRELESS OVER EAR HEADPHONES
Multi-Function Button
(Power/Play/Pause/Answer
Calls/Google, Siri Voice Assistant)
LED Indicator Light
Volume Up/Next Track
Volume Down/Previous Track
USB-C Charging Port/AUX Input
Microphone
Supplier/manufacturer info:
UK sales: WH Smith, SN3 3RX UK
USA Sales: IMEG LLC, 3755 W Sunset Rd Suite A,
Las Vegas, NV 89118
EU sales: WH Smith Ireland Limited, 6th Floor,
2 Grand Canal Square, Dublin 2, ROI
Produced in China
Contents
• Headphone x 1
• Charging Cable (USB-C to USB-A)
• Audio Cable (AUX to USB-C)
Operation: Switching ON/OFF
Switch ON:
Press and hold the Power button for approxi-
mately 3 seconds. The headset will then go into
Bluetooth search mode (red / blue light flashes
quickly and alternately followed by a tone).
Switch OFF:
Press and hold the Power button for approxi-
mately 3 seconds. The red light will and turn off,
followed by a tone.
Headphone Pairing
1. Ensure that your phone or Bluetooth device is
switched on.
2. To pair the headphone if it has not been
previously paired with a device, switch on the
headset. The headphone will enter search
mode and the light will flash red/blue.
To pair the headphone if it has been previously
paired with another device, ensure that the
previously paired device is switched on.
3. Ensure Bluetooth is switched on your phone
or device and search for wireless devices.
4. Select “InMotion” from the device list. When
successfully paired, there will be a prompt
tone followed by a blue light.
The headphone that was previously paired will
automatically connect with the device if the
device is on and within connecting range. If not,
the headphone will enter search mode and the
red/blue light will keep flashing. It will do this for
10 minutes and then automatically switch off.
Adjust the Volume
The volume will go up or down with a long press
of the +/- button during a call or listening to
music. When the volume reaches maximum, there
will be a warning tone.
Answer / End a Call
To answer a call, quickly press the Multi-Function
button to answer it, or a long press (approx. 1.5
seconds) to reject the call. To end a call, press
the Multi-Function button.
Listen to Music
To listen to music, connect the headphone to
your device. The available music functions will
depend on your Bluetooth device. If you make or
receive a call while listening to music, the music
will pause until the call ends. To play a song,
select it in the music player. To pause or resume
playing a song, press the Play/Pause button. To
select the next song during playback, press the
volume down button quickly. To select the
previous song, press the volume up button
quickly. To select the previous song, press the
volume down button quickly. To increase the
volume, press and hold the volume up button.
There will be a beep tone when reaching the
maximum volume. To decrease the volume, press
and hold the volume down button until mute.
Disconnect the Headphone
To disconnect the headphone from your device,
CUTTER
GUIDE
Print colours
Additional/Special Finishes
Cutter/Crease & Perforation Guides
PM (colour breakdown/copy):
Designer (design):
QC (quality copy):
Buyer (all elements):
Date sent to print:
Please note this run out is not a cromalin or colour proof. This run out should
ONLY be signed when all the copy has been checked and is correct, and the
colour breakdown, cutter dimensions and design checked and approved.
Any corrections to be made should be marked on this run out and returned
unsigned. Artwork will not be released until signed approval is received.
It is not WHSmith policy to send out fonts. To purchase our fonts, please
contact Agfa Monotype on 0800 371242 or visit www.agfamonotype.co.uk
PLEASE NOTE ALL AMENDS MADE AFTER
SIGN-OFF WILL INCUR ADDITIONAL SBU COSTS
© WH Smith plc and its subsidiaries, 2017. All rights reserved. The contents
of this artwork are not to be reproduced, copied or transmitted in any form
or by any means without the consent of the copyright owner.
Tel: [phone] • Ftp: whsmith.wamnet.com
WHSmith, Greenbridge Road, Swindon, Wiltshire SN3 3RX
SIGN OFFS
Date: 07.06.22
Artworker: KR
Project Manager: DOM
Job description: INMOTION PHASE 3
Job no: 4.17.69
Supplier: D&S
Supplier code: 84188
Version no: 01
SKU no: 3094761
Barcode no: 5020420036873
Line no: 05
Product: INSTRUCTIONS: WIRELESS
OVER EAR HEADPHONES
Pattern reference: -
Stock specification: UNCOATED PAPER
Finish: MATT
Size: A5
A/W scale: 100%
Colour: BLACK ONLY
BLACK
ONLY