Wireless Charger user manual Wireless Charger Model：AC52H1
Contents 1.What is in the box 2.Product Introduction 3.Specification 4.How to use 5.Important Notification 6.FCC Statement & Warning 7.Trademark Acknowledgments Thanks for purchasing this fantastic Qi Wireless charger. Please read the manual in detail for proper operation before you get to start to use. What is in the box 1) Qi Wireless Charger x1pc 2) Quick User Manual x1pc Manufacturer: SHENZHEN DNS INDUSTRIES CO., LTD. Address:23/F Building A, Shenzhen International Innovation Center, No.
Product Introduction Micro USB B Charging Port LED indicator Antiskid strip Specification
Features: Main functions: single coil wireless charger transmitter; Products applicable: all wireless charging equipment accorded with Qi standard; Charging type: one-on-one charge corresponding area; Fast charging model only work with QC quick charger. Specification: Main functions: single coil wireless charger transmitter; Standard version: WPC - 1.2.
1, Plug Your Qi Wireless Charger to the Power Source Plug the small end (micro USB B port) of the USB cord into the side of the Qi charger.
3, Charging Status Indicator
1) The indicator green light is on for 4s , then enters the standby status, the green light goes out. 2) Please lay the device directly on wireless charger for charging, the green light always stays on when the charger is in charging status 3) When the device is full of power, the green light goes out. 4) The transmitter has the function of detecting foreign objects(FOD). If there is a foreign object on the transmitter, the green light will flash.
B .
FCC Compliance Statement: This device complies with Part 18 of the FCC Rules. NOTE: This equipment has been tested and found to comply with the limits for a wireless power charger, pursuant to Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
