Quick Start Guide Harmony K140A1 ❶ Connect ❷ Listen
Welcome! Thank you for choosing Mood Media to provide your audio/visual experience! WHAT’S IN THE BOX? ❶ ❷ ❸ ❹ ❺ ProFusion | MVision ❶ The Harmony a/v player ❷ Remote control (ProFusion or MVision version) ❸ External power adapter for the Harmony ❹ Ethernet cable (and HDMI cable, if applicable) ❺ 3.5mm TRRS to RCA audio cable ❻ Window appliqué ❼ This Quick Start Guide and other important information about your Harmony device.
Harmony A QUICK LOOK AT… THE FRONT Power, Ethernet and Play Status Lights Remote Control Sensor THE BACK Audio Outputs Digital | Analog USB Ports Ethernet Port Power Adapter Input Digital | Analog Video Outputs NOTE: Your Harmony device may be configured for music only. A video display is not necessary to complete an audio only installation. Please see the full Harmony User Guide in the Client Support Hub at moodmedia.com for more detailed operating information.
CAUTION: Certain parts may cause electrical shock or injury. IMPORTANT: Please note these important operational instructions and clarifications. Connect your Harmony device ❶ Please refer to the Regulatory and Safety information sheet included with your Harmony device before proceeding. ❷ Adjust the volume on your display or speaker system down completely (off). Then power off your system and old music player. You’ll be prompted to increase the volume in step ❽.
❼ Plug the external power adapter into an ‘always on’ wall outlet. Your Harmony device will now boot-up and if scheduled, will automatically begin content playback. No further action should be required. If you need to access the local user control page, please refer to the full User Guide available online in the Client Support Hub at moodmedia.com or call us at 1.800.345.5000. NOTE: If a circuit breaker, wall switch or a timer controls the outlet you are using please ensure it is always on.
Status Lights Power Status: Red = Power is available, but the Harmony device is off. Green = The Harmony Device is on and active. Ethernet Status: Yellow = no Ethernet or WiFi connection. Green = a valid Ethernet or WiFi connection is established. Playback Status: Red = Content is not playing. Green = content is playing.
CAUTION - READ ME RISK OF ELECTRIC SHOCK! DO NOT OPEN! ATTENTION: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR! NO USER SERVICEABLE PARTS INSIDE! AU CUNE PIÈCE INTERNE RÉPARABLEPAR L’UTILISAT EUR! This symbol is intended to inform users that certain parts may cause electrical shock and injury. Ce symbole est destiné à informer les utilisateurs que les pieces internes peuvent provoquer un choc électrique et des blessures.
WARNING! To reduce the risk of fire, electric shock, or injury: Pour réduire le risque d’incendies, de chocs électriques ou de blessures: Do not use the Harmony device if it has been exposed to water. N‘utilisez pas le Harmony s’il a été exposé à l’eau. Do not use the Harmony device if it has been dropped or damaged. N‘utilisez pas le Harmony s’il a chuté et a été endommagé. Do not use the Harmony device with a damaged power cord. N‘utilisez pas le Harmony avec un cordon d’alimentation endommagé.
NOTE-1: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE-2: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.