Specification G065VN01 V2 incl. Touch - 4W Content: Mechanical Drawing Appendix A: Specification of TFT G065VN01 V2 Appendix B: Specification of Touch AST-065B080A ( Please be aware that some of the values e.g. optical, mechanical etc. of the complete unit (assembled display plus touch panel) might differ from the original values of the individual components.
1 2 4 3 155 ±0,3 ODT 139 VAT 133 AAT 132,48 AAD A 6 5 7 8 A 12,43 (max. 12,93) 153 ±0,5 ODD Contact B E 99,36 AAD 100 AAT 104 VAT 117 ±0,3 ODT 0,90 ±0,5 C 1,90 ±0,5 1 NOT TO BE DISCLOSED TO THIRD PARTY WITHOUT PERMISSION FROM D CONRAC GMBH / Data Modul AG 80 ±1 C 118 ±0,5 ODD B ODD ODT VAT AAT AAD 3 D Outline Dimension Display Outline Dimension Touch Viewing Area Touch Active Area Touch Active Area Display This drawing is only schematic representation of the structure.
G065VN01 V2 □ Preliminary Specification ■ Final Specification Module 6.5 Inch Color TFT-LCD Model Name G065VN01 V2 Date Customer Approved by Date 2012/5/21 Checked & Approved by se O nl y /2 Prepared by 01 2/ 10 /1 1 Leader Feng 2012/5/21 General Display Business Division / AU Optronics corporation AU O C on fid en tia lF or D AT AM O D U Note: This Specification is subject to change without notice. L In te rn al U Yichih Chen G065VN01 V2 Ver. 1.
G065VN01 V2 Contents 1. Operating Precautions .................................................................................... 4 2. General Description ........................................................................................ 5 2.1 Display Characteristics .......................................................................................................... 5 2.2 Optical Characteristics..................................................................................................
850 ,/3m in60,1cyles0/3m in0 G065VN01 V2 12 12 Remark Section 2.1 Section 2.2 Section 2.2 Color Gamut Min: TBD 1 Absolute Ratings of Environment Operating Temperature, Max: +85 Storage Temperature, Max: +85 Color Gamut Min: 50% Absolute Ratings of Environment Operating Temperature, Max: +80* Storage Temperature, Max: +80* *: Panel surface temperature IrushLED Typ: 0.37 A, Max: 0.41 A Operating Life Min: 50000 LED Backlight Unit Interface Signal Description Pin 5 LED On/Off: 3.
G065VN01 V2 1. Operating Precautions AU O C on fid en tia lF or D AT AM O D U L In te rn a lU se O nl y /2 01 2/ 10 /1 1 1) Display area (Polarizer) of TFT-LCD Module is easily to be damaged, please be cautious and not to scratch it. 2) Be sure to power off your machine before connecting or disconnecting your signal cable to TFT-LCD Module. 3) Wipe off water drop on display area immediately. Long contact with water may cause discoloration or spots.
G065VN01 V2 2. General Description G065VN01 V2 is designed for industrial display applications with VGA (640 x RGB x 480) resolution and 16.2M (RGB 6-bits + FRC) or 262k colors (RGB 6-bits). It is composed of a TFT-LCD panel, driver ICs, control and power supply circuits board and a backlight unit including LED driving circuit. G065VN01 V2 offers LVDS interface for display signal input. 2.1 Display Characteristics The following items are G065VN01 V2 characteristics summary at 25 (Room Temperature).
ith50cm ingdstace w vew 1 G065VN01 V2 2.2 Optical Characteristics The optical characteristics are measured under stable conditions at 25 Unit cd/m2 msec msec msec Rising 15 - 20 Note 4 - 10 15 Note 5 Rising + Falling - - 25 35 70 80 - degree degree Horizontal CR = 10 (Right) (Left) 70 degree degree Vertical CR = 10 (Upper) (Lower) 60 70 - 0.263 0.313 0.363 0.279 0.329 0.379 0.559 0.609 0.314 0.364 Red x Red y Green x 0.285 Green y nl O se lU rn a % 0.
G065VN01 V2 Note 2: Definition of 5 points position (Display active area: 132.48mm(W) x 99.36mm(H)) W W /4 W /4 W /4 W /4 H /4 1 2 H /4 3 H H /4 4 5 H /4 Note 3: The luminance uniformity of 5 points is defined by dividing the maximum luminance value by the minimum luminance value at full white condition.
V iew ngalisthem aurentofcrastio4 G065VN01 V2 Note 6: Definition of viewing angle 10, at the screen center, over 180° horizontal and 180° vertical range. The 180° horizontal (θL, θR) and 180° vertical (ΦH, ΦL) range are illustrated as following figure. 10 /1 1 3. Functional Block Diagram AU O C on fid en tia lF or D AT AM O D U L In te rn al U se O nl y /2 01 2/ The following diagram shows the functional block of the G065VN01 V2 color TFT/LCD module. G065VN01 V2 Ver. 1.
ulbshode39@ andocensaD B G065VN01 V2 4. Absolute Maximum Ratings 4.1 Absolute Ratings Symbo Min Max Unit Remark Logic/LCD Drive Voltage VDD -0.3 +4.0 Volt Ta= 25oC LCD Input Signal Voltage VIN -0.3 +4.0 Volt Ta= 25 C LED BLU Drive Voltage VLED 0 16 Volt Ta= 25 C VPWM 0 6 Volt Ta= 25oC Min Max Unit Remark Item LED Dimming Input Voltage High o o 4.
G065VN01 V2 5. Electrical Characteristics 5.1 TFT-LCD Driving 5.1.1 Power Specification Min Typ Max Units 3.0 3.3 3.6 Volt 300 mA Logic/LCD Drive Voltage IDD VDD Current - 260 Irush LCD Inrush Current - - PDD VDD Power - 0.86 Allowable Logic/LCD Drive Ripple Voltage - - Q3 AO6402 (VDD=3.3V, at 60Hz) 10 G S VR1 0.01uF/25V VCC O nl y (LCD Module Input) te R2 VDD 47K In 2 Q3 AO6402 G C3 1 All Black Pattern mVp-p F1 D1 D2 D5 D6 R2 +12.0V SW MAG-SPST (VDD=3.
G065VN01 V2 5.1.2 Signal Electrical Characteristics Input signals shall be low or Hi-Z state when VDD is off. LVDS signal (Note 1) LVDS Transmitter: THC63LVDM83A (THINE) or equivalent Parameter Symbol Min. Typ. Max. Unit Differential Input High Threshold VTH - - 100 mV Input Differential Voltage ｜VID｜ 600 mV Differential Input Low Threshold VTL Differential Input Common Mode Voltage -100 100 VCM 1.1 - - 400 - mV 1.45 V Remark VCM=1.20V VCM=1.
(R o E G065VN01 V2 Following characteristics are measured under stable condition at 25 Symbol Parameter Min om Temperature). Typ Max Units 12 13 Volt VLED Input Voltage 9 ILED Input Current - 0.25 Inrush Current - 0.37 Power Consumption IrushLED - 3.0 On Control Voltage 3.0 Dimming control Voltage High 3.0 FPWM Dimming Frequency 200 DPWM Dimming duty cycle 1 VLED On/Off Off Control Voltage VPWM 3.3 0 Dimming control Voltage Low 100% PWM duty A 100% PWM duty W 5.
G065VN01 V2 6. Signal Characteristic 6.1 Pixel Format Image y /2 01 2/ 10 /1 1 Following figure shows the relationship between input signal and LCD pixel format. O nl 6.2 Scanning Direction AU O C on fid en tia lF or D AT AM O D U L In te rn al U se The following figures show the image seen from the front view. The arrow indicates the direction of scan. Note 1: TFT-LCD interface signal description is shown in section 6.4. G065VN01 V2 Ver. 1.2 13/24 Data Modul AG - www.
G065VN01 V2 6.
G065VN01 V2 6.4 TFT- LCD Interface Signal Description G065VN01 V2 TFT-LCD module includes LVDS receiver. LVDS is a differential signal technology for high-speed data transfer LCD interface. LVDS Transmitter shall be THC63LVDM83A (THINE) or equivalent. Pin No. Symbol 2 VDD 1 Pin Description VDD 3 GND 4 SEL68 5 RxIN1- Power supply, 3.3V (typical) Power supply, 3.
G065VN01 V2 6.5 TFT- LCD Interface Timing 6.5.1 Timing Characteristics DE mode only Signal Symbol Min. Typ. Max. Unit Remark Clock frequency (DOTCLK) 1/ TCLOCK 20 25.2 50 MHz Note1 Period TH 770 800 1070 Active THD TCLOCK Note1 Blanking THB 130 160 430 Period TV 520 525 622 Active TVD TLINE Note1 Blanking TVB Horizontal Section Vertical Section Note 1: Recommended frame rate is 60 Hz.
G065VN01 V2 6.6 LED Backlight Unit Interface Signal Description Pin # Symbol Pin Description 2 VLED 12V input 1 VLED 12V input 3 GND 5 LED On/Off 4 Ground GND 6 Ground 3.3V-On; 0V/NC-Off PWM DIM 1~100% AU O C on fid en tia lF or D AT AM O D U L In te rn al U se O nl y /2 01 2/ 10 /1 1 Note1: “NC stands for “No Connection””. G065VN01 V2 Ver. 1.2 17/24 Data Modul AG - www.data-modul.
G065VN01 V2 6.7 Power ON/OFF Sequence VDD power, LCD interface signals and backlight on/off sequence are shown in the following chart. Signals from any system 0.5 T2 30 2/ nl O 10 ms 40 50 ms - - ms - - ms - - ms T4 10 T5 10 T6 0 - - ms 10 - - ms 100 - - ms T9 0 16 50 ms T10 - - 10 ms In L U D O AM AT D or lF tia 1000 - - ms on T11 te 200 T8 en Units T3 T7 fid - Max. rn al U T1 Typ. se Min.
G065VN01 V2 7. Connector & Pin Assignment 7.
G065VN01 V2 AU O C on fid en tia lF or D AT AM O D U L In te rn al U se O nl y (Rear side of TFT-LCD) /2 01 2/ 10 /1 1 7.3 PIN 1 definition of CN1 and CN2 G065VN01 V2 Ver. 1.2 20/24 Data Modul AG - www.data-modul.
/9% , 40K G065VN01 V2 8. Reliability Test Criteria Items Temperature Humidity Bias Required Condition 300Hr High Temperature Operation Remark Note 2 80 *, 300Hr Low Temperature Operation -3 High Temperature Storage Note 2 300Hr Note 2 80 *, 300 hours Note 2 -30℃, 300 hours Low Temperature Storage Note 2 -30℃/30 min, 80℃*/30 min, 100cycles Thermal Shock Test Note 2 80℃*/1 Hr (min.), power on/off per 5 minutes, repeat 5 times Hot Start Test Note 2 -30℃/1 Hr (min.
Data Modul AG - www.data-modul.com U O or lF tia on fid en C L U D AM O D AT 9. Mechanical Characteristics A al rn te In se U y nl O 22/24 G065VN01 V2 Ver. 1.
G065VN01 V2 10. Label and Packaging 10.1 Shipping Label (on the rear side of TFT-LCD display) 10.2 Carton Package Max. capacity: 80 TFT-LCD module per carton (40pcs * 2 layers) Max. weight: 16.6 kg per carton AU O C on fid en tia lF or D AT AM O D U L In te rn al U se O nl y /2 01 2/ 10 /1 1 Outside dimension of carton: 425(L)mm* 386(W)mm* 430(H)mm G065VN01 V2 Ver. 1.2 23/24 Data Modul AG - www.data-modul.
G065VN01 V2 11 Safety 11.1 Keen Edge Requirements There will be no keen edges or corners on the display assembly that could cause injury. 11.2 Materials 11.2.1 Toxicity There will be no carcinogenic materials used anywhere in the TFT-LCD module. If toxic materials are used, they will be reviewed and approved by the responsible AUO toxicologist. 11.2.
Specification AST/ATP Series Revision 11 Version March 23, 2010 Data Modul AG - www.data-modul.
Table of Contents 1. Product Specifications ...........................................................................................................................3 1-1. Product Applicable .............................................................................................................................3 1-2. Structure.............................................................................................................................................3 1-3. Environmental Specifications .
1. Product Specifications 1-1. Product Applicable § This specification is applied to the analog resistive touchscreen: ATP/AST Series. 1-2. Structure § Dimensions, structure, and shape are referred on the drawing attached. 1-3. Environmental Specifications Specification Value Operating Temperature -20°C to 70°C (no condensation) Operating Humidity -20°C to 60°C Less than 90%RH (no condensation) 3 Exceeding 60°C 133.
1-6. Appearance § Scratch, dust (W = width, L = length, D = average diameter = (longest + shortest) /2) Item Width (mm) Length (mm) Acceptable Numbers Linear(Scratch/Dust) Over 0.1mm in diameter refer to the Circular. 0.1≥W>0.05 4≥L 1pcs in φ30mm 0.05≥W>0.03 10≥L 2pcs in φ20mm 0.03≥W 20≥L Acceptable Circular (Scratch/Dust) 0.4≥D>0.3 *1 1pcs in viewing area *1 0.3≥D>0.2 2pcs in φ30mm 0.2≥D Acceptable Total Within 5pcs /panel Applied only in the Active Area.
2. Testing Regulation 2-1. Testing Regulation § If the regulation is not specified, the test is performed under the supplier’s regulation. § Tests are performed under the room temperature unless specified. The room temperature is referred as follows: Temperature: 20°C±5°C Humidity: 65%±10%RH 2-2. Environmental Specifications § Chemical Resistance Test Condition: Tested after leaving the chemical on the surface for 12 hours being wiped off by cloth. Judgement: Must be no effect in appearance. 2-3.
2-4. Electrical Characteristics § Terminal Resistance Test Condition: Top and bottom electrodes are measured at the terminal. Judgement: Must satisfy the specification. § Insulation Resistance Test Neighboring Terminals: Measured by applying the reference voltage to the terminals Active Area Electrodes: Measured by applying the reference voltage to the top and bottom electrodes. Judgement: Must satisfy the specification. 2-5. Appearance § Appearance Test Condition: Tested by an examiner with over 1.
3. Reliability Condition 3-1. Temperature Condition § Temperature Condition Test Following test are performed in the condition with no dew condensation: Cold Test: Tested after leaving the parts in -40°C±3°C for 240 hours and in the room temperature for 2 hours. Heat Test: Tested after leaving the parts in 80°C±3°C for 240 hours and in the room temperature for 2 hours.
5. Handling Notes 5-1. Precautions § This product is intended for use in standard applications (computers, office automation, and other office equipment, industrial, communications, and measurement equipment, personal and household devices, etc.
5-5. Mounting Notes Bezel Bezel edge must be positioned in the area between the Active Area and the Viewing Area. The bezel may press the touchscreen and cause input if the edge enters the Active Area. § Gap between the Bezel and Touchscreen Active Area Viewing Area Bezel Top Electrode A gap of approximately 0.5mm is needed between the bezel and the top electrode. It may cause unexpected input if the gap is too narrow. 0.
6. Warranty 6-1. Warranty Period § The warranty period is limited to 1 year from the date of shipping. The warranty for the initial defection such as appearance defection is limited to 1 month. § Any defected parts under proper use will be examined by the supplier and replaced by the new parts if the defection is considered to be caused by the supplier. § The replacement is subject to be included in the next lot. 6-2.
7. Revision history Rev1 (April 15, 1998) Initial release Rev2 (June 1, 1999) The overall revision by specification review. Rev3 (April 1, 2002) The address in the office was changed by the move. Rev4 (August 16, 2002) 1-4.Activation Force is changed “50g± 30g” to “0.5N±0.3”. 1-4.Light Transmission is changed 76% to 80%(TYP). Rev5 (September 3, 2002) 1-3.Operating Temperature is changed “0°C to 60°C” to “-20°C to 70°C”. 1-3.Storing Temperature is changed “-20°C to 70°C” to “-40°C to 80°C” 1-4.
Rev10 (November 10, 2006) The specification item name was changed. 1-3.”Storing Temperature” to “Storage Temperature” 1-3.”Storing Humidity” to “Storage Humidity” 1-4.”Operating Load” to “Activation Force” 1-4.”Light Transmissivity” to “Light Transmittance” 1-4.”Top Surface Hardness” to “Surface Hardness” 2-3.”Operating Load Test” to “Activation Force Test” 2-3.”Operating Load” to “Activation Force” 3-1.”Operationg Load” to “Activation Force” 1-4.Operating Force is changed “0.5N±0.3N” to “0.05N to 0.8N”.
DI SPLAYS AND EMBEDDED SOLUTIONS DI SPLAYS AND EMBEDDED SOLUTIONS DATA MODUL Headquarters Munich Landsberger Str. 322 D-80687 Munich - Germany Phone: +49-89-56017-0 Fax: +49-89-56017-119 www.data-modul.com Sales Office Hamburg Borsteler Chaussee 51 D-22453 Hamburg - Germany Phone: +49-40-42947377-0 Sales Office Duesseldorf Fritz-Vomfelde-Str. 8 D-40547 Duesseldorf - Germany Phone: +49-211-52709-0 Sales Office Scandinavia Lundsmindevej 5 DK-6000 Kolding - Denmark Phone: +45-75-224477 DATA MODUL France, S.
