Specification G057QN01 V2 incl. Touch - 4W Content: Mechanical Drawing Appendix A: Specification of TFT G057QN01 V2 Appendix B: Specification of Touch TP-3324S1F0 ( Please be aware that some of the values e.g. optical, mechanical etc. of the complete unit (assembled display plus touch panel) might differ from the original values of the individual components.
1 2 4 3 6 5 7 144 ±0,5 ODD 131,40 ±0,3 ODT 119,20 VAT 117,20 AAT 115,20 AAD 1 ±0,5 A 8 A 13,84 (max. 14,53) B D E 86,40 AAD 88,40 AAT 90,40 VAT 103 ±0,3 ODT 104,60 ±0,5 ODD Contact C 70 ±1 NOT TO BE DISCLOSED TO THIRD PARTY WITHOUT PERMISSION FROM C CONRAC GMBH / Data Modul AG B 1 9,10 ±0,5 ODD ODT VAT AAT AAD 3 26.02.2013 Aschenbrenner 10000 Neuanlage DRAWN BY E.C.-NO. REL.DATE MODIFICATION/DESCRIPTION RELEASED: ja D-97990 Weikersheim M 1:2 1 NO.
G057QN01 V2 □ Preliminary Specification ■ Final Specification Module 5.7 Inch Color TFT-LCD Model Name G057QN01 V2 Customer Approved by Date Date 2011/10/21 Checked & Approved by se O nl y /2 Prepared by 01 1/ 12 /2 Debbie Chiu 2011/10/21 General Display Business Division / AU Optronics corporation AU O C on fid en tia lF or D AT AM O D U Note: This Specification is subject to change without notice. L In te rn al U Daniel PY Tsai G057QN01 V2 Ver. 1.
G057QN01 V2 Contents 1. Operating Precautions .................................................................................... 4 2. General Description ........................................................................................ 5 2.1 Display Characteristics .......................................................................................................... 5 2.2 Optical Characteristics..................................................................................................
G057QN01 V2 Record of Revision Version and Date Page 0.1, March.28.2011 All 0.2, March.31.2011 Old description New Description First edition preliminary specifications Correct Mechanical Characteristics Diagram Typical Power Consumption = 3.34 W (LCD:0.46 W/LED BLU: 2.88W) @ All black pattern, Full Load and VLED=12V Weight = 150g (typ.), 165g (max.
G057QN01 V2 1. Operating Precautions AU O C on fid en tia lF or D AT AM O D U L In te rn al U se O nl y /2 01 1/ 12 /2 1) Display area (Polarizer) of TFT-LCD Module is easily to be damaged, please be cautious and not to scratch it. 2) Be sure to power off your machine before connecting or disconnecting your signal cable to TFT-LCD Module. 3) Wipe off water drop on display area immediately. Long contact with water may cause discoloration or spots.
G057QN01 V2 2. General Description G057QN01 V2 is designed for industrial display applications with QVGA (320 x RGB x 240) resolution and 262k colors (RGB 6-bits). It is composed of a TFT-LCD panel, driver ICs, control and power supply circuits board and backlight unit including LED driver circuit. G057QN01 V2 offers CMOS interface for display signal input. 2.1 Display Characteristics The following items are G057QN01 V2 characteristics summary at 25 (Room Temperature).
vengdistac 1 with50cm G057QN01 V2 2.2 Optical Characteristics (Room Temperature). Unit cd/m2 msec Response Time 800 15 - 20 Note 4 - 10 15 Note 5 Rising + Falling 25 35 70 80 - Horizontal CR = 10 (Right) (Left) 70 degree degree Vertical CR = 10 (Upper) (Lower) 60 80 Red x Red y Green x 0.313 0.506 0.556 0.265 0.315 0.365 0.596 0.646 nl y 0.546 0.329 O 0.106 rn al U se Blue y % - 0.156 0.120 50 Note 1, 2, 3 Note 6 0.363 0.379 0.606 0.381 0.206 0.
G057QN01 V2 Note 2: Definition of 5 points position (Display active area: 115.2mm(W) x 86.4mm(H)) W W /4 W /4 W /4 W /4 H /4 1 2 H /4 3 H H /4 4 5 H /4 Note 3: The luminance uniformity of 5 points is defined by dividing the maximum luminance value by the minimum luminance value at full white condition.
Viewngalsthm eurntofcasri# G057QN01 V2 Note 6: Definition of viewing angle 10, at the screen center, over 180° horizontal and 180° vertical range. The 180° horizontal (θL, θR) and 180° vertical (ΦH, ΦL) range are illustrated as following figure. 12 /2 3. Functional Block Diagram AU O C on fid en tia lF or D AT AM O D U L In te rn al U se O nl y /2 01 1/ The following diagram shows the functional block of the G057QN01 V2 color TFT/LCD module. G057QN01 V2 Ver. 1.
Bulbshode39/anocdes3 G057QN01 V2 4. Absolute Maximum Ratings 4.1 Absolute Ratings Symbo Min Max Unit Remark Logic/LCD Drive Voltage VDD -0.3 +3.6 Volt Ta= 25oC LCD Input Signal Voltage VIN -0.3 +3.6 Volt Ta= 25 C LED BLU Drive Voltage VLED 0 23 Volt Ta= 25 C VPWM 0 8 Volt Ta= 25oC Symbol Min Max Unit Remark TOP -30 +85 ℃ Note 1, 2 TST -30 +85 Item LED Dimming Input Voltage High o o 4.
G057QN01 V2 5. Electrical Characteristics 5.1 TFT-LCD Driving 5.1.1 Power Specification Parameter Symbol Min Typ Max Units 3.0 3.3 3.6 Volt VDD Logic/LCD Drive Voltage IDD VDD Current - 115 130 mA Irush LCD Inrush Current - - 1.5 A PDD VDD Power - 0.46 0.51 Watt Allowable Logic/LCD Drive Ripple Voltage - - 100 mVp-p S VR1 0.01uF/25V VCC O nl y (LCD Module Input) te R2 VDD 47K In 2 Q3 AO6402 G C3 1 (VDD=3.3V, at 60Hz) 12 G D1 D2 D5 D6 R2 +12.
(Ro 4 G057QN01 V2 5.1.2 Signal Electrical Characteristics Input signals shall be low or Hi-Z state when VDD is off. Typ. Max. Unit High VIH 0.7VDD - VDD Volt Low VIL 0 - 0.3VDD Volt High VIH 0.7VDD - VDD Volt Low VIL 0 - 0.3VDD Volt 5.2 Backlight Unit Driving 5.2.
G057QN01 V2 Note 6: Operating life means brightness goes down to 50% initial brightness. Minimum operating life time is estimated data. AU O C on fid en tia lF or D AT AM O D U L In te rn al U se O nl y /2 01 1/ 12 /2 Note 7: See Section 6.6 for LED Backlight Unit Interface Signal Description G057QN01 V2 Ver. 1.0 12/25 Data Modul AG - www.data-modul.
G057QN01 V2 6. Signal Characteristic 6.1 Pixel Format Image /2 01 1/ 12 /2 Following figure shows the relationship between input signal and LCD pixel format. nl y 6.2 Scanning Direction AU O C on fid en tia lF or D AT AM O D U L In te rn al U se O The following figures show the image seen from the front view. The arrow indicates the direction of scan. Note 1: TFT-LCD interface signal description is shown in section 6.4. G057QN01 V2 Ver. 1.0 13/25 Data Modul AG - www.
G057QN01 V2 6.3 The Input Data Format This product displays 262,144 colors in terms of the 64 grey levels on RGB respectively. The following table demonstrates AU O C on fid en tia lF or D AT AM O D U L In te rn al U se O nl y /2 01 1/ 12 /2 the display of input data. G057QN01 V2 Ver. 1.0 14/25 Data Modul AG - www.data-modul.
G057QN01 V2 AU O C on fid en tia lF or D AT AM O D U L In te rn al U se O nl y /2 01 1/ 12 /2 6.4 TFT- LCD Interface Signal Description Note 1: “Low” stands for 0V. “High” stands for 3.3V. “NC” stands for ”No Connection”. G057QN01 V2 Ver. 1.0 15/25 Data Modul AG - www.data-modul.
G057QN01 V2 6.5 TFT- LCD Interface Timing 6.5.1 Timing Characteristics DE mode only Signal Symbol Min. Typ. Max. Unit Remark Clock frequency (DOTCLK) 1/ TCLOCK 6.2 6.4 12.
G057QN01 V2 6.6 LED Backlight Unit Interface Signal Description Pin # Symbol Pin Description 2 VLED 12V input 1 VLED 12V input 3 GND 5 PWM DIM 4 Ground GND 6 Ground 1~100% PWM dimming LED On/Off 0V-Off; 3.3~5V/NC-On Note 1: “NC” stands for ”No Connection 6.7 Power ON/OFF Sequence VDD power, LCD interface signals and backlight on/off sequence are shown in the following chart.
G057QN01 V2 7. Connector & Pin Assignment 7.1 TFT- LCD Signal (CN1): LCD Connector Manufacturer Starconn 089H33-000100-G2-R, compatible with Connector Model Number IMSA-9637S-33Y902 & ELCO 08-6210--033-340-800+ Pin# Symbol Pin# Symbol Pin# Symbol 1 GND 12 GND 23 B3 NC 14 G1 25 B5 5 GND 16 G3 27 7 R1 6 15 R0 8 9 G2 17 G4 18 R2 R3 24 G5 26 GND 28 VDD R/L GND 30 32 B0 R4 21 B1 11 R5 22 B2 31 VDD 33 U/D NC GND se rn al U 7.
G057QN01 V2 7.
G057QN01 V2 /2 7.4 PIN 1 definition of CN1 and CN2 /2 01 1/ 12 ( Rear side of TFT-LCD ) rn al U se O nl y 7.5 PIN 1 definition of CN3 In te 80 ± 5 CN1 CN2 AU O C on fid en tia lF or D AT AM O D U L CN3 ( Rear side of TFT-LCD ) G057QN01 V2 Ver. 1.0 20/25 Data Modul AG - www.data-modul.
,h3ousHr 40:/9% G057QN01 V2 8. Reliability Test Criteria Items Temperature Humidity Bias High Temperature Operation Low Temperature Operation High Temperature Storage Low Temperature Storage Thermal Shock Test Required Condition Remark Note 2 85 Note 2 85 Note 2 -20℃/30 min ,60℃/30 min ,100cycles Note 2 -3 Note 2 -30℃,300 hours Note 2 85℃/1 Hr (min.), power on/off per 5 minutes, repeat 5 times Hot Start Test -30℃/1 Hr (min.
Data Modul AG - www.data-modul.com U O C en t id on f ia l O AM AT rD Fo 9. Mechanical Characteristics A D U L se lU rn a te In y nl O 01 /2 /2 22/25 G057QN01 V2 Ver. 1.
G057QN01 V2 10. Label and Packaging 10.1 Shipping Label (on the rear side of TFT-LCD display) 10.2 Carton Package Max. capacity: 60 pieces TFT-LCD module per carton Max. weight: 12.95 kg per carton AU O C on fid en tia lF or D AT AM O D U L In te rn al U se O nl y /2 01 1/ 12 /2 Outside dimension of carton: 520(L)mm* 340(W)mm* 250(H)mm G057QN01 V2 Ver. 1.0 23/25 Data Modul AG - www.data-modul.
G057QN01 V2 11 Safety 11.1 Keen Edge Requirements There will be no keen edges or corners on the display assembly that could cause injury. 11.2 Materials 11.2.1 Toxicity There will be no carcinogenic materials used anywhere in the TFT-LCD module. If toxic materials are used, they will be reviewed and approved by the responsible AUO toxicologist. 11.2.
AU O C on fid en tia lF or D AT AM O D U L In te rn al U se O nl y /2 01 1/ 12 /2 G057QN01 V2 G057QN01 V2 Ver. 1.0 25/25 Data Modul AG - www.data-modul.
Specification AST/ATP Series Revision 11 Version March 23, 2010 Data Modul AG - www.data-modul.
Table of Contents 1. Product Specifications ...........................................................................................................................3 1-1. Product Applicable .............................................................................................................................3 1-2. Structure.............................................................................................................................................3 1-3. Environmental Specifications .
1. Product Specifications 1-1. Product Applicable § This specification is applied to the analog resistive touchscreen: ATP/AST Series. 1-2. Structure § Dimensions, structure, and shape are referred on the drawing attached. 1-3. Environmental Specifications Specification Value Operating Temperature -20°C to 70°C (no condensation) Operating Humidity -20°C to 60°C Less than 90%RH (no condensation) 3 Exceeding 60°C 133.
1-6. Appearance § Scratch, dust (W = width, L = length, D = average diameter = (longest + shortest) /2) Item Width (mm) Length (mm) Acceptable Numbers Linear(Scratch/Dust) Over 0.1mm in diameter refer to the Circular. 0.1≥W>0.05 4≥L 1pcs in φ30mm 0.05≥W>0.03 10≥L 2pcs in φ20mm 0.03≥W 20≥L Acceptable Circular (Scratch/Dust) 0.4≥D>0.3 *1 1pcs in viewing area *1 0.3≥D>0.2 2pcs in φ30mm 0.2≥D Acceptable Total Within 5pcs /panel Applied only in the Active Area.
2. Testing Regulation 2-1. Testing Regulation § If the regulation is not specified, the test is performed under the supplier’s regulation. § Tests are performed under the room temperature unless specified. The room temperature is referred as follows: Temperature: 20°C±5°C Humidity: 65%±10%RH 2-2. Environmental Specifications § Chemical Resistance Test Condition: Tested after leaving the chemical on the surface for 12 hours being wiped off by cloth. Judgement: Must be no effect in appearance. 2-3.
2-4. Electrical Characteristics § Terminal Resistance Test Condition: Top and bottom electrodes are measured at the terminal. Judgement: Must satisfy the specification. § Insulation Resistance Test Neighboring Terminals: Measured by applying the reference voltage to the terminals Active Area Electrodes: Measured by applying the reference voltage to the top and bottom electrodes. Judgement: Must satisfy the specification. 2-5. Appearance § Appearance Test Condition: Tested by an examiner with over 1.
3. Reliability Condition 3-1. Temperature Condition § Temperature Condition Test Following test are performed in the condition with no dew condensation: Cold Test: Tested after leaving the parts in -40°C±3°C for 240 hours and in the room temperature for 2 hours. Heat Test: Tested after leaving the parts in 80°C±3°C for 240 hours and in the room temperature for 2 hours.
5. Handling Notes 5-1. Precautions § This product is intended for use in standard applications (computers, office automation, and other office equipment, industrial, communications, and measurement equipment, personal and household devices, etc.
5-5. Mounting Notes Bezel Bezel edge must be positioned in the area between the Active Area and the Viewing Area. The bezel may press the touchscreen and cause input if the edge enters the Active Area. § Gap between the Bezel and Touchscreen Active Area Viewing Area Bezel Top Electrode A gap of approximately 0.5mm is needed between the bezel and the top electrode. It may cause unexpected input if the gap is too narrow. 0.
6. Warranty 6-1. Warranty Period § The warranty period is limited to 1 year from the date of shipping. The warranty for the initial defection such as appearance defection is limited to 1 month. § Any defected parts under proper use will be examined by the supplier and replaced by the new parts if the defection is considered to be caused by the supplier. § The replacement is subject to be included in the next lot. 6-2.
7. Revision history Rev1 (April 15, 1998) Initial release Rev2 (June 1, 1999) The overall revision by specification review. Rev3 (April 1, 2002) The address in the office was changed by the move. Rev4 (August 16, 2002) 1-4.Activation Force is changed “50g± 30g” to “0.5N±0.3”. 1-4.Light Transmission is changed 76% to 80%(TYP). Rev5 (September 3, 2002) 1-3.Operating Temperature is changed “0°C to 60°C” to “-20°C to 70°C”. 1-3.Storing Temperature is changed “-20°C to 70°C” to “-40°C to 80°C” 1-4.
Rev10 (November 10, 2006) The specification item name was changed. 1-3.”Storing Temperature” to “Storage Temperature” 1-3.”Storing Humidity” to “Storage Humidity” 1-4.”Operating Load” to “Activation Force” 1-4.”Light Transmissivity” to “Light Transmittance” 1-4.”Top Surface Hardness” to “Surface Hardness” 2-3.”Operating Load Test” to “Activation Force Test” 2-3.”Operating Load” to “Activation Force” 3-1.”Operationg Load” to “Activation Force” 1-4.Operating Force is changed “0.5N±0.3N” to “0.05N to 0.8N”.
DI SPLAYS AND EMBEDDED SOLUTIONS DI SPLAYS AND EMBEDDED SOLUTIONS DATA MODUL Headquarters Munich Landsberger Str. 322 D-80687 Munich - Germany Phone: +49-89-56017-0 Fax: +49-89-56017-119 www.data-modul.com Sales Office Hamburg Borsteler Chaussee 51 D-22453 Hamburg - Germany Phone: +49-40-42947377-0 Sales Office Duesseldorf Fritz-Vomfelde-Str. 8 D-40547 Duesseldorf - Germany Phone: +49-211-52709-0 Sales Office Scandinavia Lundsmindevej 5 DK-6000 Kolding - Denmark Phone: +45-75-224477 DATA MODUL France, S.