User's Manual

ManualsBrandsDM Technology ManualsElectronicsPortable Mulitmedia Player

How to Install the Windows 98 USB Driver

Install the Windows 98 USB Driver

Window 98 users should first install the USB driver for the operating system.

Users of later versions of Windows do not need to install the USB driver, it will be automatically 

recognized as a removable disk. Follow the instructions below to install the USB driver:

Insert the installation CD into your CD-ROM drive.

Use the USB cable that ships with the player to connect it to your PC.

The USB driver is included in the "WIN98_USB_Driver" folder of the Transcoder CD.

To install the USB driver

When the "Add New Hardware Wizard" appears

When the driver is not properly recognized on the first connection

1. When the "Add New Hardware Wizard" window appears, click on Next.

2. Select "Search for the Best Driver for This Device (Recommended)" and click Next.

3. Select "CD-ROM Drive" and click Next.

4. Identify the device that you want to locate a driver for and click on Next.

5. When you see the "Copying Files" dialog box, select Browse.

6. Select the "WIN98_USB_Driver" folder on the CD-ROM and click OK.

7. In the "Copying Files" dialog box, click OK.

8. Select Finish.

9. In Windows Explorer, a "removable disk" drive will have been created.



1. Select Start> Control Panel.

2. Select System from the Control Panel.

3. Select "Device Manager" and check for any incompletely installed USB devices.

4. Select USB Device from Other Devices and click on Properties.

5. Select "Reinstall Driver" at the bottom of the dialog box.

6. In the "Device Driver Update Wizard" dialog box, click on Next.

7. Check the "Search for the latest river (Recommended)" box and click on Next.

8. Select "CD-ROM Drive" and click Next.

9. Select "Updated Driver (recommended)" and click Next.

10. Make sure that the "device to search a driver for" is "DM Technology AV Player" 

and select Next.

11. The installation is completed successfully.

Summary of content (11 pages)

PAGE 1
Install the Windows 98 USB Driver How to Install the Windows 98 USB Driver Window 98 users should first install the USB driver for the operating system. Users of later versions of Windows do not need to install the USB driver, it will be automatically recognized as a removable disk. Follow the instructions below to install the USB driver: To install the USB driver 1 Insert the installation CD into your CD-ROM drive. The USB driver is included in the "WIN98_USB_Driver" folder of the Transcoder CD.
PAGE 2
Installing and Using Transcoder Installing and Using Transcoder Using Environment [PC requirements] • • • • ENG Pentium III 1G at least Memory: 256MB at least Microsoft DirectX supported VGA Sound card-required [OS] • Microsoft Windows ME/Windows 2000/Windows XP [Codec] • Divx 5.1.1 Visit at the web site http://download.divx.com/divx/DivX511.exe and download Divx codec for installation. • A unified codec for running media files on a PC.
PAGE 3
Installing and Using Transcoder Installing and Using Transcoder Installation Guide Transcoder software decodes files such as WMV, ASF, AVI, MPEG, MPG, WMA, MPGA, VOB and DAT so that the files can be played. Most files having the video formats, MPEG4-SP and DivX Ver 3.11, and audio formats, 4.0, 5.03 SP and MPEG1 Layer3 (MP3), can be played without being transformed. Use a Transcoder for files that do not play, The following programs will be installed to your PC. 1. DivX 5.1.1 Bundle 2.
PAGE 4
Installing and Using Transcoder Installing Transcoder 1 Insert the supplied installation CD and execute "TransCoder.EXE". 2 Select "Next". 3 As shown in the figure right, the process of program installation is displayed. 4 After installation is complete, select "Finish" to end installation. ENG Executing Transcoder Select the menus at the right bottom of Windows in the following sequence: "Start" → "Program (P)" → "TRANSCODER" → "TRANSCODER".
PAGE 5
Installing and Using Transcoder Installing and Using Transcoder Configuration and Function of Transcoder Screen Œ ´ ˇ ¨ ˆ Ø ∏ ” Œ Menu ´ Function icon ˇ File search window: This has the same function as Windows Explorer. ¨ File list window: This has the same function as Windows Explorer. ˆ Transcoded files list window: The files to be transcoded are displayed. Ø Location where the transcoded files are saved: This displays the location where the transcoded files are saved.
PAGE 6
Installing and Using Transcoder Menu • File - New Schedule: Calls a new file in the list of transcoded files. - Open Schedule: Applies the saved *.dmt files in the list of transcoded files. - Save: Saves the contents of the operation which is under progress. in the list of transcoded files. - Save As: Saves as another name. - Exit: Exits the program. • Build - Starts transcoding. • Option - Sami: If there is a caption file, whether to apply or not will be determined.
PAGE 7
Installing and Using Transcoder Installing and Using Transcoder Transcoding files 1 2 3 4 5 6 30 Select the location where has a file to be transcoded in the File Search window. Drag a file to be transcoded in the File List window and move it into the Transcoded Files List window. Select the "Transcoding ( )" function icon for execution. The cursor in blue will be located on the file under transcoding and transcoding will proceed.
PAGE 8
Installing and Using Transcoder Note • If Codec does not exist, the player will notice you through a message window. The message window disappears three seconds later and an icon in red appears on the list. • If the saving space is not enough, the player will notice you through a message window. The message window disappears three seconds later and an icon in red appears on the list. • If Caption does not exist, the player will operate without caption.
PAGE 9
Miscellaneous Miscellaneous Battery and Power • You can use two AA-sized alkaline batteries or Ni-MH rechargeable ones only. • Check the polarity (+ or -) of the battery before inserting it. • Using a weak battery for an extended time can cause a player malfunction. • When you turn on the power and the player does not operate with the status indicator blinking, replace the battery as this may be due to an inadequate battery capacity.
PAGE 10
Miscellaneous Troubleshooting Symptom Solution ENG The player is dead. 1. Check a battery or AC adaptor is installed 2. Check the HOLD switch or LCD ON/OFF switch is turned on. 3. Press the POWER button. When connecting an A/V cable, the playback screen of an external component is not displayed normally Check an A/V cable is properly connected. Earphone volume is not output normally. 1. Check for the level of volume. 2. Check for the connection of the earphone.
PAGE 11
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.