Operation Using a Setup Menu MEMORY FORMAT MEMORY FORMAT ✓ INTERNAL EXTENDED ✓ FORMAT • FORMAT INTERNAL: Use to delete all the files in the built-in memory. EXTENDED: Use to delete all the files in the external SD card. PICTURE SETUP PICTURE ✓ BRIGHTNESS CONTRAST LCD BRIGHTNESS SETUP • BRIGHTNESS Use to adjust the brightness of the LCD window. • CONTRAST Use to adjust the sharpness of the LCD window. SETUP EXIT SETUP EXIT 12 The Setup menu will disappear and the menu screen will be displayed.
Connection Connecting an External Component and USB Connecting an AV Component Right side of the player A/V component (DVD/VCR) Video/Audio cable • Connect a Video/Audio cable between the A/V component (DVD/VCR) and the player. Connecting USB Note Left side of the player PC • When moving, copying, or deleting a file through USB, remove the USB after making sure that the USB connection message window disappears. During the connection of USB, all the buttons on this player do not operate.
Installing and Using Transcoder Installing and Using Transcoder Using Environment [PC requirements] • • • • Pentium III 500 MHz at least Memory: 256MB at least Microsoft DirectX supported VGA Sound card-required [OS] • Microsoft Windows ME/Windows 2000/Windows XP [Codec] • Divx 5.1.1, Divx 4.01, Divx 4.11, or Divx 4.12 Visit at the web site http://www.divx.com/divx/?src=toptab_divx_from_/index.php and download the Standard Divx codec for installation.
Installing and Using Transcoder Installing Transcoder 1 2 Insert the supplied installation CD and execute "DMTransCoder.EXE". Select "Next". 3 As shown in the figure right, the process of program installation is displayed. 4 After installation is complete, select "Finish" to end installation. Executing Transcoder Select the menus at the right bottom of Windows in the following sequence: "Start" → "Program (P)" → "DMProject" → "DMTCoder".
Installing and Using Transcoder Installing and Using Transcoder Configuration and Function of Transcoder Screen Œ ´ ˇ ¨ ˆ Ø ∏ ” Œ Menu ´ Function icon ˇ File search window: This has the same function as Windows Explorer. ¨ File list window: This has the same function as Windows Explorer. ˆ Transcoded files list window: The files to be transcoded are displayed. Ø Location where the transcoded files are saved: This displays the location where the transcoded files are saved.
Installing and Using Transcoder Menu • File - New schedule: Calls a new file in the list of transcoded files. - Open schedule: Applies the saved *dmt files in the list of transcoded files. - Save: Saves the contents of the operation which is under progress. in the list of transcoded files. - Save As: Saves as another name. - Exit: Exits the program. • Build - Starts transcoding. • Option - Caption: If there is a caption file, whether to apply or not will be determined.
Installing and Using Transcoder Installing and Using Transcoder Transcoding files 1 2 3 4 5 6 18 Select the location where has a file to be transcoded in the File Search window. Drag a file to be transcoded in the File List window and move it into the Transcoded Files List window. Select the "Transcoding ( )" function icon for execution. The cursor in blue will be located on the file under transcoding and transcoding will proceed.
Installing and Using Transcoder Note • If Codec does not exist, the player will notice you through a message window.The message window disappears three seconds later and an icon in red appears on the list. • If the saving space is not enough, the player will notice you through a message window.The message window disappears three seconds later and an icon in red appears on the list. • If Caption does not exist, the player will operate without caption.
Miscellaneous Miscellaneous Battery and Power • Since this player adopts an exclusive lithium icon battery, it can charge itself and buff itself speedily within about two hours while it is completely discharged. • When video plays while the player is buffed, the player can keep playing for about two hours. When only MP3 plays, the player can keep playing for about four hours. • Depending on the user's convenience, the player can be charged by using a USB cable or adaptor.
Miscellaneous Troubleshooting Symptom Solution The player is not turned on 1. Check a battery or AC adaptor is installed 2. Check the battery is worn out. If so, charge it with an AC adaptor or USB cable. 3. Check the HOLD key or LCD OFF key is turned on. 4. Press the POWER button. When connecting an A/V cable, the playback screen of an external component is not displayed normally 1. Check an A/V cable is properly connected. 2.
Miscellaneous Specifications Model DM-AV10 Size (Wx D x H) 96mm x 79mm x 80mm Weight Including battery: 133g/Without battery: 107g Frequency characteristics Audio 70Hz ~ 20KHz Headphone output 20mW, Impedance: 16ohm S/N 90dB or larger (based on MP3) Direct playback: AVI (Video: ISO MPEG-4, Audio: MP3) Video Supported files Audio Trans S/W used: WMV, ASF, AVI, MPEG, MPG, WMA MP3, ID3 Tag ver1.
. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
