OSMO Universal Mount Quick Start Guide V1.
Disclaimer and Warning Congratulations on purchasing your new DJI product. The information in this document affects your safety and your legal rights and responsibilities. Read this entire document carefully to ensure proper configuration before use. Failure to read and follow instructions and warnings in this document may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in the vicinity.
Introduction The Universal Mount for the Osmo is used to mount an external device such as a microphone or flashlight. It comes with two cold shoe mounts with 1/4” threads which can be positioned on any of the six holes. Specifications Dimensions: 84 mm × 30 mm × 30 mm Weight: 50 g Cold Shoe Mount 1/4” Thread Installation Attach the Universal Mount to the rosette mount on the Osmo handle and tighten the knob to secure.
To reposition the cold shoe mount, remove the 1/4” thread using a coin or a screwdriver. Suggested Combination WARNING Ensure the Universal Mount is mounted securely and the cold shoe mounts are secure and will not fall off. The content is subject to change. Download the latest version from www.dji.com/product/osmo If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. © 2015 DJI. All Rights Reserved.
