USBASP Driver link: https://zadig.akeo.ie/ Video link: https://youtu.be/54cAKaolOQY Connection like below, then connect it to the PC USB interface: You can use 2.
Install driver: Driver name is Zadig Options-choose List All Devices Choose USBasp, Driver libsubK(v3.0.7.
After install the driver successfully, you can open device manger and see the deive as below:
Open AVRDUDESS and setting as below: Programmer: Uptanium USBASP Port: usb MCU: ATmega8 Flash: choose hex you want to use Click Detect, then click Go Please pay attention about the print information in the window It will show writing ... Reading..., once done it will show avrdude.exe done.
Any question please contact via sales@diymalls.com Website: www.diymalls.