Data Sheet

Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.
One DITEK Center 1720 Starkey Road - Largo, FL 33771
Phone: [phone] Direct: 727-812-5000
Technical Support: 1-888-472-6100
www.diteksurgeprotection.com
Doc. Number: SPS-100089-002 Rev 1 05/17
©2017 DITEK Corp.
Page 1 of 1
Module Technical Specifications & Suggested Applications
Part Number
Service
Voltage
MCOV
Clamping
Voltage
Surge
Current
Rating
Suggested Applications
DTK-VM45POE
48V
64V
72V
20kA/pair
PoE Camera Feeds,
PoE Access Points
DTK-VM45ETH
<5V
6.5V
6.8V
20kA/pair
Ethernet Connections, IP
Camera Feeds, RS485 Circuits
DTK-VM4512
12V
24V
28V
20kA/pair
RS232 Circuits
DTK-VM4524
24V
33V
39V
20kA/pair
Digital Phones,
Intercom Systems
DTK-VM4536
36V
48V
56V
20kA/pair
Communication Loops
DTK-VM4548
48V
64V
72V
20kA/pair
Off Premise Extension,
Dialer Circuits
DTK-VM4575
75V
90V
105V
20kA/pair
Speaker Circuits
DTK-VM45130
130V
175V
204V
20kA/pair
Analog Dialer, POTS Lines,
Ring-Up Voltage
DTK-VMBNC
1V
2V
2.8V
10kA
HD Analog Camera Feeds
Dimensions:
Modules: 2.60”L x 1.30”W x 0.75”H
DTK-VM6WM: 10.25”L x 1.90W x 3.5”H
DTK-VM12RM: 19”L x 1.0”W x 3.5”H
Weight:
DTK-VM45: 0.8 oz – DTK-VMBNC: 1.6 oz
DTK-VM6WM: 8.8 oz – DTK-VM12RM: 16.0 oz
Call Technical Support at 888-472-6100 for module selection assistance
DITEK’s Versa-Module Series is designed to protect analog, digital, high
speed data and communication circuits. Installing any combination of up to
6 or 12 protection modules in one of our faceplates allows you to utilize a
single ground point, and simplifies cable management where space is
limited. Individual replacement modules are available for both BNC and
shielded RJ45 connections. When shielded connections are used with STP
cabling, the device does not require a separate earth ground.
Product Features
 Protects shielded analog, digital, high
speed data and communications
circuits
 VMBNC module compatible with HD-
TVI, HD-CVI and AHD
 Face plates accept up to 6 or 12
replaceable protection modules
 Single point ground for ease of
installation
 Simplifies cable management where
space is limited
Applications
 Point-of-sale devices and peripherals
 Video surveillance cameras/systems
 Computers, switches, and local area
networks
 Analog/digital communication devices
DTK-VM12RM: Rack mount – accommodates up to 12 individual protection modules
DTK-VM6WM: Wall mount – accommodates up to 6 individual protection modules
VM Series: Individual protection modules