Data Sheet

DITEK’s CM, CM+, and CMXPLUS provide users
with a range of durable, cost-effective secondary
surge arresters suitable for use in a wide range of
applications. DITEK arresters are typically used to
protect pumps, motors, HVAC condensers, and
incoming utility power. Products are available in
compact housings, and the CM+/CMXPLUS series
are the only arresters at their level that provide LED
status indicators for each phase. Backed by a ten
year warranty, DITEK surge arresters are your
choice for effective, economical protection.
CM, CM+, CMXPlus Surge Arresters
Single Phase and Three Phase Secondary Arresters,
120VAC – 600VAC
DITEK Surge Arresters – Key Features
• 26,000A – 100,000A surge current capacity
• Compact size to fit most applications
• Available in seven voltage configurations
• Diagnostic LEDs (CMXPLUS models)
indicate system power and TVSS function
• Weatherproof design allows for use in most
environments
• Parallel connection for easy installation
• Ten year limited warranty
Dimensions – CM, CM+, CMXPlus Models
Weight: .75 lb.
4.35”H x 3.55”W x 1.6”D
One DITEK Center
1720 Starkey Road
Largo, FL 33771
Document: SPS-100024-001 Rev 6 12-09
©2009 DITEK Corp.
Specification Subject to Change
1-800-753-2345 Direct: 727-812-5000
Technical Support: 1-888-472-6100
www.ditekcorp.com