Data Sheet

Selection Guide
DTK-#P#
Number of Pairs:: 1, 2, 4, 6, 8, 12, 25
Voltage Code:D, X, LV, OPX, SPK, SGR, RUV
Example: DTK-1PLV
Example: DTK-25PRUV
Performance Data
Telephone wiring is the single most common
application of lightning protection in the low voltage
industry. While there are new technologies being
created every day, there are some technologies that
don’t change. DITEK’s “P” series is available in 1-25
pair models, and is most commonly found punched
down on 66 blocks for incoming telco and building-
to-building runs. Each pair of protection is
represented by a red and a green lead. Simply
terminate a set of leads for each pair of wiring on
any punch block, and provide a ground to dissipate
excess energy.
P Series
66 Block Punch Down Surge Protection
General Product Specifications
P Series
Application Features
• Protect 1, 2, 4, 6, 8, 12 or 25 pairs to match your
system configuration needs
• Available for low voltage loops and Telco lines
• Flying leads allow connection via downblocks or
wire terminals
Product Features
Agency Approvals: UL497B
Connection Method: Punchdown on M150 “66” block
Max Continuous Current: Unlimited (parallel installation)
Max Surge Current: 2,000 Amps per pair (6V-50V)
9,000 Amps per pair (75V-130V)
Protection Modes: Tip-G, Ring-G (All)
Operating Temperature: -40°F - 158°F (-40°C - 70°C)
Maximum Humidity: 95% non-condensing
P Series
1-25 Pair Telco Protection
Product Features
Weight: 1.6oz (1-4 pair)
6.4oz (6-12 pair)
10.4oz (25 pair)
Housing: ABS
Warranty: Ten Year Limited Warranty
Accessories: DIN Rail Kit – Part
Number DTK-DRK
Model
DTK-#P#
Service
Voltage MCOV
D ≤6 V 8VDC 13V
X ≤14 V 18VDC 22V
SGR ≤95 V 127VDC 150V
LV ≤30 V 38VDC 47V
OPX ≤50 V 66VDC 82V
102VDC
175VDC
≤75 V
≤130 V
Clamp
Voltage
SPK 119V
RUV 204V
One DITEK Center
1720 Starkey Road
Largo, FL 33771
Doc. Number: SPS-100008-001 Rev 1 8-07
©2007 DITEK Corp.
Specification Subject to Change
1-800-753-2345 Direct: 727-812-5000
Technical Support: 1-888-472-6100
www.ditekcorp.com