Data Sheet

DITEK’s 2MHLP series of signal, data and loop
circuit surge protectors provide robust protection in
a compact package. Designed for ease of
installation, with convenient field-replaceable
modules, the 2MHLP protects two circuit pairs per
module. Applications include protection of 4-20mA
current loops, alarm panel NAC, SLC and IDC
loops, and burglar alarm panels. The DTK-2MHLP is
suitable for use on AC and DC circuits.
DTK-2MHLP
Voice, Data and Signaling Circuit Modular Surge Protection
General Product Specifications
Selection Guide
Example: DTK-2MHLP24BWB
DTK-2MHLP____B____
Select Voltage: 5, 12, 24, 36, 48, 75
WB: 2MHLP with Single Mounting Base
DTK-MB10: Hardwire mounting base
DTK-MBV: Horizontal wiring across base
Multiple module mounting bases available separately
(DTK-MB, DTK-2MB, DTK-3MB, DTK-4MB, DTK-5MB)
Example: (3) DTK-2MHLP36B + (1) DTK-3MB
Performance Data
DTK-2MHLP
Product Features
• Multi-stage, SAD technology, hybrid design
provides the best possible protection
• Hard-wire mounting base
• Field replaceable, hot swappable, modular edge
card connection design
• Six voltage levels available to protect all types
of voice/data applications
• Two pairs protected per module; when used with
mounting base (DTK-MB) modules can be
ganged to protect up to ten pairs with a common
ground
• Ten Year Limited Warranty
Specifications
Agency Approvals: UL497B
Connection Method – Module: Edge card into DTK-
MB mounting base
Base: 10AWG max screw terminals
Max Continuous Current: 5 Amps
Max Surge Current: 20kA
Data Rate: 200kbps (5v) to 2Mbps (130V)
Protection Modes: Line-Ground (All)
Operating Temperature: -40°F - 158°F (-40°C - 70°C)
Maximum Humidity: 95% non-condensing
Dimensions
– Module: 1.9”H x 2.1”W x 1.4”D
(48mm x 53mm x 36mm)
– Module with Base: 2.6”H x 3.25”W x 1.5”D
(66mm x 83mm x 38mm)
Weight: 1.2 oz (34g) without base;
2.8 oz(79g) with base
Housing: ABS
One DITEK Center
1720 Starkey Road
Largo, FL 33771
1-800-753-2345 Direct: 727-812-5000
Technical Support: 1-888-472-6100
www.ditekcorp.com
Model
DTK-
2MHLP
Service
Voltage
MCOV Typical Let
Through
Voltage
5B 0-5 Volts 5 Volts 6.8 V
12B 12 Volts 18 Volts 21.6 V
24B 24 Volts 33 Volts 39 V
36B 36 Volts 48 Volts 57 V
48B 48 Volts 64 Volts 76 V
75B 75 Volts 90 Volts 108 V
Doc. Number: SPS-100010-001 Rev 12 01/14
©2011 DITEK Corp.
Specification Subject to Change