Data Sheet

Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.
One DITEK Center 1720 Starkey Road - Largo, FL 33771
Phone: [phone] Direct: 727-812-5000
Technical Support: 1-888-472-6100
www.diteksurgeprotection.com
Doc. Number: SPS-100010-003 Rev 2 03/17
©2017 DITEK Corp.
Page 1 of 2
Technical Specifications
DTK-2MHLP
5F
12F
24F
36F
48F
75F
Service Voltage:
5V
12V
24V
36V
48V
75V
MCOV:
6V
18V
33V
48V
64V
90V
Clamping Voltage:
6.8V
21.6V
39V
57V
76V
108V
Protection Modes:
Line-Ground (All)
Surge Current
Rating:
20,000 Amps
Max Continuous
Current:
1 Amp
Data Rate:
200kbps to 2Mbps
Mechanical Characteristics
Base Connection
Method:
10AWG max screw terminals
Module Connection
Method:
Edge card into mounting base
Housing:
ABS
Operating
Temperature:
-40°F - 158°F (-40°C - 70°C)
Maximum Humidity:
95% non-condensing
Dimensions:
Module
2.1”L x 1.4W x 1.9”H
(53mm x 36mm x48mm)
Module with Base
3.25L” x 1.5”W x 2.6”H
(83mm x 38mm x 66mm)
Weight:
1.2 oz (34g)
2.8 oz (79g)
Quality, Standards & Approval
Agency Approvals:
UL497B
Warranty:
Ten Year Limited Warranty
Accessories
 To order Module with Base, add “WB” to end of
part number
 Test Module Kit – Part Number DTK-2MHLPTM
 DIN Rail Mounting Kit – Part Number DTK-DRK
Applications
 Circuits that operate at less than 1 Amp
 Fire Alarm Panel SLC, PIV and IDC Circuits
 Burglar Alarm Panel IDC Circuits

4-20mA Current Loops
DITEK’s DTK-2MHLPF series of loop circuit surge
protectors provide robust protection in a compact package.
This series was designed to remove load instead of shorting
to ground. Convenient field-replaceable modules offer ease
of installation, and the Snap-Track base system allows
installers to protect multiple circuits while utilizing a common
ground point.
Product Features
 Protects two pairs per module
 Exclusive load removal feature
 Multi-stage, SAD technology, hybrid design,
provides the best possible protection
 Field replaceable, modular edge card connection
design with a single point ground for fast
installation, saves time
 Six voltage levels available to protect all types of
voice/data applications
 Hard-wired multi-base mounting system allows
you to protect up to ten pairs with a common
ground. See next page for base part numbers
 Suitable for use on both AC and DC circuits
DTK-2MHLP24F
DTK-2MHLP24FWB