Data Sheet

DITEK’s CAT6A Surge Protective Devices
(SPD’s) are specifically designed for the
demanding requirements of today’s network
infrastructure. They provide maximum protection
for IP and PoE circuits transmitting video and/or
data over CAT5e, CAT6 or CAT6A cable. The
CAT6A Series products are suitable for use on
data networks, IP Video cameras, Point of Sale
Terminals, and any other piece of networked
equipment. Now available with 110-to-RJ
connections!
CAT6A Series
10 Gigabit Ethernet Surge Protection
General Product Specifications
Product Features
• Protects all four pairs
• Compatible with CAT5E, CAT6 and CAT6A circuits.
• Termination method:
DTK-110C6A / DTK-110C6APOE
110 Punch Down In/Out
DTK-110RJC6A / DTK-110RJC6APOE
110 Punch Down In, RJ45 Out
• Multi-stage, SAD technology, hybrid design
provides the best possible protection
• Automatically resets to protect against multiple surges
• Ten Year Limited Warranty
Specifications
Agency Approvals: UL497B
Standards Compliance: CAT6A, TIA-568-C.2
Data rate: 10 Gigabit Ethernet
Max Continuous Current: 0.4A/pair
Protection Modes: Line-Ground (All)
Operating Temperature: -40°F - 158°F
(-40°C - 70°C)
Maximum Humidity: 95% non-condensing
Dimensions: 4.2” x 3.25” x 1.75”
(107mm x 83mm x 44mm)
Weight: 5.0 oz (141 g)
Housing: ABS
One DITEK Center
1720 Starkey Road
Largo, FL 33771
1-800-753-2345 Direct: 727-812-5000
Technical Support: 1-888-472-6100
www.ditekcorp.com
Performance Data
DTK-110RJC6APOE
Model Number
Typical Service
Voltage
Clamping
Voltage MCOV
Peak Surge
Current
(10/1000µs)
DTK-110C6A 0-12 Volts 21.6 Volts 18 Volts 100A/pair
DTK-110C6APOE 48 Volts 72 Volts 64 Volts 30A/pair
DTK-110RJC6A 0-12 Volts 21.6 Volts 18 Volts 100A/pair
DTK-110RJC6APOE 48 Volts 72 Volts 64 Volts 30A/pair
Doc. Number: SPS-100077-001 Rev 3 09/14
©2014 DITEK Corp.
Specification Subject to Change