User Guide Document Name User Guide Document No. Version Security Class UM-GW-AS-001(E) V1.
《User Guide》_V1.0 Revision History Date Editor 2013-10-10 Xi Wang Revision Items Initial version Proprietary & Confidential Version 1.
《User Guide》_V1.0 Table of Contents 1 Safety and General Information ................................................................................................................. 1 1.1 Important Safety Precautions ................................................................................................................................ 1 1.1.1 Phone Precautions .........................................................................................................................................
8.3.1 8.3.2 8.3.3 9 《User Guide》_V1.0 Text meaasge ................................................................................................................................................ 11 Multimedia meaasge .................................................................................................................................... 11 Service message ...........................................................................................................................................
《User Guide》_V1.0 1 1.1 Safety and General Information Important Safety Precautions Read these guidelines before using your wireless phone. Failure to comply with them may be dangerous or illegal. 1.1.1 Phone Precautions 1) Switch off your phone in aircraft, hospital and any facility where posted notices instruct you to do so. Wireless phone can cause interference to electronic instruments and medical equipment, when using your phone in such kind of area, meet any special regulations in force.
《User Guide》_V1.0 If the electrolyte inside the battery gets into your eyes, it may blind you. In such case, do not rub your eyes but rinse with a large quantity of water immediately and consult a doctor. For safety, do not put the battery into your mouth or use the damaged battery. Do not attempt to disassemble or modify a battery. Doing so may result in leaking, overheating, rupture or fire.
《User Guide》_V1.0 10) 11) 12) 13) 14) 15) 16) causing the charger overheating, leakage of electricity and malfunction. If the charger comes into contact with water or any other liquids, immediately unplug the charger from outlet to reduce the risk of overheating, fire, electric shock or charger malfunction. Do not disassemble or modify the charger. Doing so could result in risk of injury to persons, electric shock, fire and damage to the charger.
《User Guide》_V1.0 2.2 Keys specification Keys Specification Dial key Answer the call by pressing any dial keys. In idle mode, enter phone number and press the key to make a call. Or dial a number from phonebook or call records. In idle mode, press the key to display the call logs. OK key In idle mode, press OK key to access the menu. In option menu, press OK navigation key to confirm selection. End key End the call. Return to idle menu.
《User Guide》_V1.0 Incoming call alert type: That is “Ring”. That is “Vib. only”. That is “Vib. And ring”. That is “Vib. then ring”. Battery Straight stripe is more, the battery is more. 3 3.
《User Guide》_V1.0 (b) If left unused, keep SIM card out of the reach of small children. (c) Keep SIM card away from static, dusty and water. (d) When inserting or removing SIM card, always make sure that the phone is switched off before you remove the battery. Or the SIM card memory might be damaged. ※ 3.4 T-Flash card use 3.4.1 Installing/Removing T-Flash card This mobile supports the T-Flash card feature. Make sure that the T-Flash card has already inserted into mobile.
《User Guide》_V1.0 5 5.1 Call Functions Making a Call When you want a call, in idle mode, select to open dialpad, input the area code and phone number. Press “Options”, select “Save to phonebook” or “Call”. Press * key until character “+” appears, and then you can dial an international number. (The to dial the number. If the number is stored ‘+’ stands for international dial code.) Then select with a name, it appears on the display when you dial the number.
《User Guide》_V1.0 6 Phonebook In idle mode, select to access Phonebook. This feature allows you to store phone numbers and their corresponding names in the memory of your SIM card and phone’s memories, at the same time, provides browsing, adding, managing functions. Your phone can store up to 300 contacts, while SIM card memory depends on various SIM card. There is “1” or “2” icon displayed on the right side of some contacts, it means this contact is stored in SIM1 or SIM2. 6.1 Phonebook 6.1.
《User Guide》_V1.0 7 Call center In this menu, you can view the calls you missed, dialed and received, as well as all calls. 7.1 Call history There is “1” or “2” icon displayed on the right side of every call logs, it means this call is dialed or received by SIM1 or SIM2. Press the top tab to show dialed calls, received calls, missed calls and all calls. Every menu shows most 20 numbers.
《User Guide》_V1.0 7.2.2 SIM2 call settings Please refer to “SIM1 call settings”. 7.2.3 Advance settings 7.2.3.1 Auto redial If activate the function, when dial failed, the phone will dial the number automatically. 7.2.3.2 IP dial Set IP prefix number. Enter the IP number, select
《User Guide》_V1.0 8.3 Message settings 8.3.1 Text meaasge Set the SMS parameter. Select “SIM1” or “SIM2”. SMSC address: set short message center number. Only input the number, the message can be sent or received. Valid period: if messages can not be delivered from your message center due to some reason (i.e. your phone is switched off). Select the period in which the service center tries to deliver the message. Message type: select the message send type.
《User Guide》_V1.0 record. 9.2 Image viewer Show image list, select to do: View, Browse style, Send, Use as, Rename, Delete, Sort by, Storage, Image information,. 9.3 FM radio Open the FM radio, the phone will show the channel frequency that the phone searched automatically. And select to operate: Channel List: show all radio channels. Press middle key to edit the frequency, the value is among 87.5MHZ and 108.0MHZ. Manual Input: input channel manually.
《User Guide》_V1.0 Edit: edit task content. Delete: delete selected task. Delete overdue: delete the overdue tasks. Delete all: delete all tasks. Jump to date: directly jump to a specific date. View uncompleted: show all uncompleted tasks. Send vCalendar: select sending vCalendar mod: Send by SMS, Send by MMS, and Send by Bluetooth. Save as file: save in the phone or card. 10.3 Calculator Through the calculator, you can operate: Addition, Subtraction, Multiplication and Division.
《User Guide》_V1.0 1 1 Settings Many different features of your phone can be customized to suit your preferences. 11.1 Profiles The menu allows setting different prompt mode for call and message in different environment. 11.1.1 General Set the phone ring tone and other prompt mode as your prefer. 1) Activate: activate and set as default mode. 2) Customize: Set Alert type, Ring type, SIM1/2 incoming call, Power on, Power off, SIM1/2 Message tone, Keypad tone and the volume of Ring tone, Key tone.
《User Guide》_V1.0 11.2.5 Display Set the display parameter in idle mode. 11.2.6 Save Power Setup Adjust the light and close the keypad light. 11.2.7 Flight mode After setting the flight mode, you need not power off the phone on the plane, at the same time cannot make a call. 11.2.8 Font size Select the size. 11.2.9 UART settings Select SIM card 1 or SIM card 2, the settings used to determine the current uart port which accepts AT is used by SIM 1 or SIM 2. 11.2.10 Misc.
《User Guide》_V1.0 11.5.2 SIM2 security Please refer to “SIM1 security”. 11.5.3 Phone security 11.5.3.1 Phone lock If activate Phone lock, before you use phone, you need input correct phone password. 11.5.3.2 Change password Change phone password. 11.5.4 Auto keypad lock Set the keypad lock mode. You can activate or disable the function. 11.6 Connectivity 11.6.1 Bluetooth The phone support Bluetooth communication mode. Power: set the function on or off. Visibility: Select On or Off.
《User Guide》_V1.0 Advanced settings: other settings. 11.7 Notification settings If you open the notification service, you can set the notification style, badge app icon, or sound of messaging, call log, email and downloads. 11.8 Restore settings In this menu enter your phone code (the initial value is 1122) and press to reset your phone to its default settings. 1 2 Guidelines for safe and efficient use 12.
《User Guide》_V1.0 Press and hold end key until image appears on the display. Check the battery contacts. Remove and insert battery and switch your phone on again. Check the battery charge level. Can’t switch on Can’t connect network to Move into an area of better coverage. Beyond the network cover area； Contact your service provider if your SIM card is invalid. The audio quality of the call is poor Press navigator key to increase the volume when you are in a call.
《User Guide》_V1.0 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
