AlarmDock Prem UI V1.9 Revisions Date 24/2/11 Version V1.1 2/3/11 8/3/11 V1.2 V1.3 11/4/11 V1.4 14/5/11 V1.5 27/5/11 20/6/11 V1.6 V1.7 24/6/11 V1.8 8/8/11 V1.
AlarmDock Prem UI V1.
AlarmDock Prem UI V1.9 On and Standby/Off Mode Display sequence for when speaker is turned on/off manually Buttons Used: Power button ‘’ON’ will display for 2 seconds Brightness Level: 7/7 N.B. Any buttons pressed within the 2 seconds of ‘ON’ showing will have normal functionality and override the ‘ON’ displayed. Speaker activates previous mode prior to speaker switching off.
AlarmDock Prem UI V1.
AlarmDock Prem UI V1.9 Transport Buttons iPod Mode Short press Skips to prev track Skips to next track Play/pauses track Long press Rewinds current track by 10 seconds per second F.Forward current track by 10 seconds per second FM Mode Short Press Decreases FM frequency by 0.1 Increases FM frequency by 0.1 Cycles through presets Long Press Scans up to next strong frequency (Display will show the frequency scanning up to the next strong channel.
AlarmDock Prem UI V1.9 Volume (Only accessible when speaker is in ON mode) Turning the rotary button will bring up the volume display (This will only occur if the speaker is not currently in any setup processes, e.
AlarmDock Prem UI V1.9 Time Setting (only available when speaker is on Standby) Display sequence for setting the time Buttons Used: Set Button Press Set Button - Rotary Function No Activity for 5s Set Button pressed (Short/Long press) 12h will begin to flash instantly 0.5s 0.
AlarmDock Prem UI V1.9 Alarm Setting Sequence Display sequence for setting the alarms Accessible when speaker is ON or Standby Buttons Used: Set Button Press Set Button - Rotary Function Power Button To set alarm 1, Alarm 1 icon must be illuminated ONLY To set alarm 2, Alarm 2 icon must be illuminated ONLY Alarm Button pressed (long) Hour digits will begin to flash instantly.
AlarmDock Prem UI V1.9 Alarm Setting Sequence Display sequence for setting the alarms Accessible when speaker is ON or Standby Buttons Used: Set Button Press Set Button - Rotary Function Power Button Volume will be displayed. Turn rotary button to set alarm volume.
AlarmDock Prem UI V1.
AlarmDock Prem UI V1.
AlarmDock Prem UI V1.9 Snooze Sequence of display for when an alarm rings Buttons Used: Snooze (Set Button) Power Button FM Mode Pressing during alarm ring stops the alarm and returns the speaker and display back to what it was prior the alarm ring AUX mode When Alarm is ringing, the alarm icon will flash: 0.5s on, 0.5s off.
AlarmDock Prem UI V1.
AlarmDock Prem UI V1.9 Saving Presets (FM Mode Only) Buttons Used: Play/Pause Button Rotary Button Set Button Play/Pause button pressed (long) ‘01’ will being to flash. Turn the rotary button to cycle through the presets: Pr 01 Pr 02 Pr 03... ...
AlarmDock Prem UI V1.
AlarmDock Prem UI V1.9 BT - Connection Model Refer to P1050 Connection Model document Buttons Used: BT Button During Standby BT is in connectable state BT icon is off BT Button on speaker will carry no functionality when speaker is in Standby I.e. cannot access pairing mode when unit is in standby.
AlarmDock Prem UI V1.
AlarmDock Prem UI V1.
AlarmDock Prem UI V1.
AlarmDock Prem UI V1.
AlarmDock Prem UI V1.
AlarmDock Prem UI V1.
Syncing speaker alarms Alarms Interaction between app and speaker (Docked and via BT) AlarmDock Prem UI V1.