Installation Instructions

Cloud Connector

Sensor

Please read this guide before

attempting to operate the product.

Failure to follow these instructions

may result in an increased risk of

personal injury or damage to

electrical shock, burns or

Research AS shall not be liable for

damage caused where the product

owner has failed to follow the

instructions set out in this guide.

No changes shall be made to the

equipment without the

manufacturer’s permission as this

operate the equipment

to sun or UV light

-40–85°C

IEEE 802.3at Type I PoE

Mounting

For secure installation of your

Cloud Connector, use screws to

attach mounting bracket.

For customer support and further

installation guidance, go to:

Strandveien 17, 1366 Lysaker

Oslo, Norway

PAGE 1
Please read this guide before attempting to operate the product. Failure to follow these instructions may result in an increased risk of personal injury or damage to -40–85°C electrical shock, burns or Research AS shall not be liable for damage caused where the product owner has failed to follow the instructions set out in this guide. No changes shall be made to the equipment without the manufacturer’s permission as this operate the equipment Sensor IEEE 802.
PAGE 2
Sensor EU: Frequency Band ISM 868 MHz Transmit Power < 1 mW CE: Hereby, Disruptive Technologies Research AS declares that the radio equipment type Sensor EU PN 100111 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.d21s.com/doc Sensor US: Frequency Band ISM 915 MHz Transmit Power < 1 mW FCC: This device complies with part 15 of the FCC Rules.