DISPLAYS2GO DIGITAL 49inch Edge Lit Kiosk USER MANUAL Model: DGEDGEK49 Description: 49inch Edge Collection Digital Kiosk Scan QR code to visit the product page: Operating Instructions for Digital Signage Note: Before using the product, please read the instructions carefully! Do not attempt to disassemble this product. If the product does not work properly, please call our Customer Service Department at 1-844-221-3393.
Contents Features ................................................................................................................................ 3 Safety Warnings and Precautions ........................................................................................... 3 Assembly and Connection ...................................................................................................... 5 Packing List ...............................................................................................
Features 1. Embedded with Android 11 smart operating system and unique UI design, bringing you a more convenient operation and better visual experience. 2. Support USB mouse and keyboard, realizing easy manipulation like a computer. Using a mouse for set up is recommended. 3. Built-in Wi-Fi module, high capacity memory and high capacity cache, making it smoother to watch 1080P HD movies and play big games. 4.
WARNING Cut off the power supply before connecting or disconnecting any cables. Do not place the Digital Signage on any instable positions, or else it may be damaged or cause fire. Do not place the Digital Signage in the positions such as: 1. The environment subject to direct strong sunlight, moisture, extreme temperature or too much dust, 2. The environment with flammable or explosive materials, 3.
CAUTION Do not let children climb onto the Digital Signage. Keep the small parts away from children to prevent them from swallowing. If the Digital Signage won’t be used for a long time, please turn it off and pull out the power plug. To adjust the position of the Digital Signage, please disconnect all power cords and move slowly to avoid tip over. Do not scratch or knock the LCD with hard object, or twist and squeeze the LCD.
Steps for Unpacking 1. Open the top cover as shown in Fig. 2. (Fig. 1) (Fig. 2) 2. Carefully lift out the unit as shown in Fig. 3 and place it at the desired location that is level and clean (Fig. 4). (Fig. 3) (Fig.
Interfaces 1 2 3 4 5 6 4. WiFi interface, 1. USB port X2, 2.RJ45 interface (Ethernet), 3. HDMI input, 5. On/Off button, 6.Power port, Note: Please pull out the power plug before installing or disassembling the unit! HDMI Input Feature 1. Connect another media player or PC via HDMI Port on the device. 2. Click the Main Apps button “ ” in the Home page to enter the “APPS” menu interface (Fig. 1). 3. Click the "HDMI in" (Fig 2). NOTE：Some media players may not be supported. Fig. 1 Fig.
Remote Control Installing batteries for the remote control: Remove the battery cover and insert two AAA batteries (1.5V). Ensure that the battery polarity matches the “+”/“-” marks in the battery compartment of the remote control. Precautions for using the remote control: Aim the remote control at the receiver window. Do not place any object between the remote control and the receiver window to avoid interference with the normal operation. Keep the remote control away from violent vibration.
Description of Basic Operation Power on/Standby Insert the power plug into the outlet. If the Digital Signage has the switch button “I”, turn it on, if you press the switch button “O”, the Digital Signage enters standby state. In power on state, enter “System Assistant” and press the “ ” button on the remote control, and the Digital Signage enters standby state.
Fig. 3 Local Settings 1. Click the Main Apps button “ ” in the Home page to enter the “APPS” menu interface (Fig. 1) 2. Click the “Settings” icon in the “APPS” menu interface (Fig. 2) and enter “Wi-Fi” menu (Fig. 3), 3. Click options in the “Wi-Fi” menu and set up different options. Fig. 1 Fig. 2 Fig.
Description of Settings Interface (shown on the right) Icon Function Network & internet Connected devices Apps & notifications Display Sound Storage Privacy Location Security Accounts Accessibility Screenshot Memory System About table Status of Menu Bar 1. Click the “setting”(Fig. 1), 2. Click the “Display”(Fig. 2), 3. Open the drop-down box for advanced options (Fig. 3), 4. The display interface of the hidden menu bar is shown in Figure 4, 5.
Fig. 3 Fig. 4 Fig. 5 Screen Rotate 1. Click the Main Apps button “ ” in the Home page to enter the “APPS” menu interface (Fig. 1) 2. Click “System assistant” into Fig. 2 3. Choose the degree you would like to Rotate screen(Fig. 3), then click “CONFIRM”, after the restart, the screen will be rotated (Fig. 4) Fig. 1 Fig. 2 Fig. 3 Fig.
Choose System Language: 1. 1.Get into “System”(Fig. 1), then click “Language & input” (Fig. 2) 2. Click “Languages”, then click “Add a language” (Fig. 3) 3. You can add the required system language (Fig. 4) 4. Drag the system language you just added up to the front(Fig. 5) Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig.
Factory Reset: 1. Get into Settings, then click “System” (Fig. 1), 2. Open the drop-down box for advanced options (Fig. 2), 3. Click “Reset options” (Fig. 3), 4. Click “Erase all data (factory reset)” (Fig. 4), 5. Click “Erase all data”(Fig. 5). Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig.
Operating instructions of LED Strip Remote and APP Remote Control Code matching function: power on the device, hold down "ON" key for 5 seconds, the device flashes slowly to indicate successful code matching. Code clearing function: power on the device, hold down "OFF" key for 5 seconds, the device flashes quickly to indicate successful clearing. APP Step1: Click the "Magic Home" icon in the "Application" menu to open the application. Click on "+" in the top-right corner, Fig. 1 Fig. 2 Fig.
Step 2: Select "Add Device" from drop down menu, the login interface will show up. You can choose to log in with your existing account or create a new account for the first time use. (An account is required to use the app), Fig. 1 Fig. 2 Step 3: Instructions to create a new account Enter your email address in the “account name” field. Enter and confirm your password. Password must have a minimum of 4 characters, numbers and letters can be used.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Step 5: Connect the LED light controller to WiFi. Search for the LED light controller, and click the light bar controller (Fig 6-1), As shown in Figure 6-2: Select the WiFi to which the LED light controller is connected, NOTE: Connect to the same WiFi network to which the digital signage is connected. As shown in Figure 6-3: Rename the LED light controller or directly click "Done", Fig. 1 Fig.
Fig. 3 Step 6: Enter the LED light controller setting interface Colors： Support 16 million colors control and brightness adjustment.5 own created colors and brightness level will be stored by pressing long on the“ DIY” button and recalled by short pressing the same button. On the display top left corner, the individual channels R/G/B can be called separately and adjusted from 0-255 to obtain the desired colors. Fig. 1 Fig.
Fig. 3 Microphone： This device does not support this function. You need to install a voice module. Music： Synchronization function of lighting and music rhythm You can import music through the USB flash disk to synchronize the light and music rhythm. Fig. 1 Fig.
Open "MediaFolder", create 3 subfolders, and change their names to "Images", "Videos", "Music". Copy the media file to be displayed, image to "Images", video to "Videos", Music to "Music" Format requirement: Image JPG/JPEG/BMP/PNG Video MPEG1/MPEG2/MPEG4/ MKV Music MP3 Step 3: Plug in the USB drive into the device and click the DiViEx App to open it.
Setting: Step 1: Select the time you would like each picture to be on the screen for by dragging the bar to the desired time. Select how you would like the images to display. Select the desired transition effect between pictures.
Sticker You can add seven special effects to the picture Frame You can add different borders to the picture Reset Restore the original image Picture sharing “ ” When you click the share button, you can share the picture to the corresponding APP 22 / 30
Pictures saving “ ” When you click the Save button, it will create a new picture Image deletion Click " " to delete unwanted pictures Music: List all music files in Playlist library Add music to playing list music from Playlist library, you can click right arrow, music title will show the number of playlist music. To remove background music from the playlist, click the left arrow in the playlist Fig. 1 Fig.
Technical Specifications Panel Power supply Environment Functions ITEM SPECIFICATION LCD size 49” Light source LED backlight Resolution 1920*1080 (pixels) Brightness (typ.)/(min) 400cd/m2 (typ.) Contrast (typ.) 1200: 1 (typ.) Response (ms) 10ms (typ.) Pixel pitch 0.19 (H) mm * 0.56 (V) mm Refresh rate 60Hz Viewing angle 178° (H)/178° (V) Color saturation 68% Viewable area 1073.8(H) mm * 604.0(V) mm Chromaticness 16.
Functions I/O interfaces Structure Language Supported Video Files AVI, MPEG4, WMV, MKV, FLV, MP4, MOV Supported Photo Files JPG, JPEG, BMP, PNG, GIF Audio output, supported files Left and right audio channel, MP3 RTC (real-time clock) Yes Schedule power on/off Yes System update USB compatible App installation Support download and installation TF N/A Ethernet (RJ45) 1 HDMI 1 VGA N/A Headset N/A USB 2 WiFi 1 SIM N/A Net weight 73kg Gross weight 92kg Unit dimensions (W*D*H
Troubleshooting the Digital Signs –DGEDGEK49 Issue No picture or sound Probable Cause Unit not plugged into wall outlet Power cord not properly connected to the terminal on the back of the unit. Unit not powered on Wall outlet not working Solutions □ □ □ □ □ No sound (but picture is working) Volume not adjusted on the remote control. Content/Video does not have sound. Content format is not compatible. Speakers do not work.
No Wi-Fi signal Wi-Fi is not turned on in product settings. Wi-Fi is not connected to a network Low or no signal from the router Antenna is missing or not pointed upward. Damaged PC board □ Check that Wi-Fi is turned on in settings o Click the settings icon from the Android home screen. o o Click “Wi-Fi”. Click the on/off icon in the upper right hand corner to turn on Wi-Fi. “On” will appear on the upper left hand side.
Android board is defective. Images> Editor > Paste o Open DiViEX app and select desired trasitions, slide time and looping > Play MX Player steps > Follow same steps as DiViEX App > MediaFolder > Video > Editor > Paste. o Open MX Player and select video to play. o Loop video: While the video is playing, click on the video and there should be 3 dots in the top right corner.
Names and Contents of Toxic and Hazardous Substances or Elements in the Product Part name Toxic and hazardous substances or elements Pb Display Shell О Circuit board assembly * Hg Cd Cr6+ PBB PBDE О О О О О О О О × × О О О О О Wires О О О О О О Metal parts О О О О О О Packaging materials* О О О О О О Remote control О О О О О Speaker О О О О О О О О О О Accessories* О * : Circuit board assembly includes PCB and the electronic elements thereof,
FCC STATEMENT: FCC ID: 2ASCB-DIGEDGE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
