Installation Instructions

ManualsBrandsDisplaydata ManualsElectronicsNetworking Device

Eng. No: 601-0009-01

ZBD Displays Limited

Work Instructions

Tesco Basestation Setup

Instruction

Strictly Private & Confidential

Page i

Work Instructions

Tesco Basestation Setup

Instruction

Abstract

This document defines the setup to be used for the Tesco Basestation.

Prepared by:

Shiv Sidar

Signed:

Date:

11/09/2006

Authorised by:

D.Dix

Signed:

Date:

11/09/2006

Amendment Record

Amendment

Number

Date Amended by Sections / Pages affected

1 11/09/06 S.Sidar Initial Release

Document Control

The distribution of this document is controlled in accordance with the ZBD Quality management

system. The ZBD DCC is the responsible Control Centre.

The information disclosed herein is the exclusive property of ZBD Displays Ltd. and is not to be

disclosed without the written consent of ZBD Displays Ltd. No part of this publication may be

reproduced or transmitted in any form or by any means including electronic storage, reproduction,

execution or transmission without the prior written consent of ZBD Displays Ltd.

This document is intended for limited circulation.

The information contained in this document is subject to change without written notice and should not

be construed as a commitment by ZBD Displays Ltd. unless such commitment is expressly given in a

covering document.

Summary of content (11 pages)

PAGE 1
ZBD Displays Limited Work Instructions Tesco Basestation Setup Instruction Eng. No: 601-0009-01 Work Instructions Tesco Basestation Setup Instruction Abstract This document defines the setup to be used for the Tesco Basestation. Prepared by: Shiv Sidar Signed: Date: 11/09/2006 Authorised by: D.Dix Signed: Date: 11/09/2006 Amendment Record Amendment Number 1 Date Amended by 11/09/06 S.
PAGE 2
ZBD Displays Limited Work Instructions Tesco Basestation Setup Instruction Eng. No: 601-0009-01 TABLE OF CONTENTS 1 INTRODUCTION.....................................................................................................................1 2 APPLICABLE DOCUMENTS ...............................................................................................1 3 TESCO BASESTATION SETUP INSTRUCTION........................................................
PAGE 3
Eng. No: 601-0009-01 ZBD Displays Limited Work Instructions Tesco Basestation Setup Instruction 1 INTRODUCTION Below are some notes on how to install the Tesco Basestation. 2 APPLICABLE DOCUMENTS A. BOM – 120-0003-01. 3 TESCO BASESTATION SETUP INSTRUCTION Firstly the following programs below need to be download and installed. MSDE (Rel A) .Net Framework 1.0 – dotnetredist.exe Hot Fix .Net Framework 1.0 SPK 3 EMS – SQL Manager – SQL Manager 2005 for SQL Server Lite Installing .Net Framework 1.
PAGE 4
Eng. No: 601-0009-01 ZBD Displays Limited Work Instructions Tesco Basestation Setup Instruction Select the correct instance and enable TCP, as above. This need to be configured on both Instances. Once configured reboot machine. Copy Folders From P:\Customer\Tesco\TescoBasestationInstall Folder Name: ScalesClientInstall Folder Name: ZBDApps To: Local Hard Disk C:\ Using OSQL - Location - c:\Program Files\Microsoft SQL Server\80\tools\binn> From the local machine: type osql -Usa -S(local)\Counters -P or Rem
PAGE 5
Eng. No: 601-0009-01 ZBD Displays Limited Work Instructions Tesco Basestation Setup Instruction Example test command: use dxCountersClient go select count(*) from txProduct go Installing Weighscale S/W Add the 'Message Queueing' component from the Add/Remove components control panel section. Copy TescoCounters folder from c:\ScalesClientInstall directory to c:\Program Files. The following config options may need to be changed: In file "CountersClient.exe.
PAGE 6
Eng. No: 601-0009-01 ZBD Displays Limited Work Instructions Tesco Basestation Setup Instruction Check that both passwords have been set to null. To run the weighscale s/w, run CountersClient.
PAGE 7
Eng.
PAGE 8
Eng.
PAGE 9
Eng. No: 601-0009-01 ZBD Displays Limited Work Instructions Tesco Basestation Setup Instruction Register Database – Counters- Settings Link – Tesco Counters Database to ZBD Counters Database In SQL Manager – connect the ZBDCounters instance and run the following command to link Counters to ZBDCounters databases Command: -Using SQL Editor – ZBDCounters Instance use master Exec sp_addlinkedserver ‘(local)\Counters’ Strictly Private & Confidential © 2006 ZBD Displays Ltd Page 7
PAGE 10
Eng. No: 601-0009-01 ZBD Displays Limited Work Instructions Tesco Basestation Setup Instruction Registry Configuration Import the following Reg Key – RF_REG.reg from location c:\ZBDApps\ Check reg key location in regedit HKEY_CURRENT_USER\Software\VB and VBA Program Settings\TescoLabel Updater Batch Files Create shortcuts to the following batch file to location c:\Documents and Settings\ESEL\Start Menu\Programs\Startup from c:\ZBDApps Shortcut to startScales Shortcut to startTescoAdmin Shortcut to startT
PAGE 11
Eng. No: 601-0009-01 ZBD Displays Limited Work Instructions Tesco Basestation Setup Instruction Command: regsvr32 c:\windows\system32\[.dll name] eg. regsvr32 c:\windows\system32\MSRDO20.dll Windows Firewall Settings Exceptions – Add Program Add all three sqlserver program executables to the exceptions list c:\Program Files\Microsoft SQL Server\MSSQL$ZBDCounters\Binn\Sqlserver.exe c:\Program Files\Microsoft SQL Server\MSSQL$Counters\Binn\Sqlserver.exe c:\Program Files\Microsoft SQL Server\MSSQL\Binn\Sqlse