Report No.: 18270BC10334401 SDS REPORT Client Name : Shenzhen Undergraduate Electronic Technology Co., Ltd. Address Room 301, Floor 3, Buildling B, South Pearl Shaxia : Industrial Park, Minzhi Street, Longhua New District, Shenzhen Product Name : Polymer Li-ion Battery Date : Nov.
Report No.: 18270BC10334401 Page 2 of 11 SAFETY DATA SHEET According to HCS-2012 APPENDIX D TO §1910.1200 (Version: 1.0/EN) 1. Identification Sample name: Polymer Li-ion Battery Sample model: 602030 Rating: Nominal Voltage: 3.7V Rated Capacity: 300mAh, 1.11Wh Weight: 6.3g Manufacturer: Shenzhen Undergraduate Electronic Technology Co., Ltd.
Report No.: 18270BC10334401 Page 3 of 11 2. Hazard(s) identification (a) Preparation hazards and classification No harm at the normal use. When the battery is in extreme pressure deformation, high-temperature environment, overload, short-circuit condition, or disassemble the battery, an explosion of fire and chemical burn hazards may occur. (b) Primary Route(s) of Exposure These chemicals are contained in a sealed stainless steel enclosure or a sealed aluminums foil pocket.
Report No.: 18270BC10334401 Page 4 of 11 H302: Harmful if swallowed; H332: Harmful if inhaled; Precautionary statements: Prevention: P264 Wash thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P280 Wear protective gloves/protective clothing/eye protection/face protection. P261 Avoid brething dust/fume/gas/mist/vapours/spray. P271 Use only outdoors or in a well-ventilated area. Response: P312: Call a Poison center or doctor/physician if you feel unwell.
Report No.: 18270BC10334401 Page 5 of 11 4. First-Aid Measures (a) Description of first aid measures Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical advice / attention if you feel unwell. Skin contact: Remove contaminated clothes and rinse the skin with plenty of water. Get medical advice /attention if you feel unwell. Eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Report No.: 18270BC10334401 Page 6 of 11 dissipate. Provide maximum ventilation to clear out hazardous gases. The preferred response is to leave the area, dispose the case after the batteries cool and vapors dissipate. Provide maximum ventilation. Avoid skin and eye contact or inhalation of vapors. (b) Environmental Precautions Prevent material from contaminating soil and from entering sewers or waterways.
Report No.: 18270BC10334401 Page 7 of 11 Hand protection: Wear neoprene or natural rubber material gloves if handling an open or leaking battery. Eye Protection: Not necessary under normal conditions, wear safety glasses if handling an open or leaking battery. (c) Other Protective Equipment Have a safety shower and eye wash fountain readily available in the immediate work area. (d) Hygiene Measures Do not eat, drink, or smoke in work area. Maintain good housekeeping. 9.
Report No.: 18270BC10334401 Page 8 of 11 (d) Conditions to avoid Do not subject Lithium battery to mechanical shock. Keep away from open flames, high temperature. (e) Incompatible materials Strong oxidizer, strong acid. (f) Hazardous decomposition products Under fire conditions, the electrode materials can form carcinogenic nickel and cobalt oxides. 11.
Report No.: 18270BC10334401 Page 9 of 11 12. Ecological Information (a) Ecotoxicity Water hazard class 1(Self-assessment): slightly hazardous for water. (b) Persistence and Degradability No information available. (c) Bioaccumulative potential No information available. (d) Mobility in soil No information available. (e) Other adverse effects No information available. 13.
Report No.: 18270BC10334401 Page 10 of 11 vehicle should be away from fire and heat sources. When transported by sea, the assemble place should keep away from bedroom and kitchen, and isolated from the engine room, power and fire source. Under the condition of Road Transportation, the driver should drive in accordance with regulated route, don’t stop over in the residential area and congested area.
Report No.: 18270BC10334401 Page 11 of 11 provided all the relevant data fully and truly. However, the information is provided without any warranty on their absolute extensiveness and accuracy. This SDS was prepared to provide safety preventive measures for the users who have got professional training. The personal user who obtained this SDS should make independent judgment for the applicability of this SDS under special conditions. In these special cases, we do not assume responsibility for the damage.