User manual Dishwasher DX 103
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Use of the appliance _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Use of rinse aid _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Loading cutlery and dishes _ _ _ _ _ _ _ _ _ _ _ _ _ _ Use of detergent _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Select and start a washing program _ _ _ _ _ _ _ _ _ 2 3 4 4 5 5 7 7 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• Remove all packaging before first use. • A qualified and competent person must do the electrical installation. • A qualified and competent person must do the plumbing installation. • Do not change the specifications or modify this product. Risk of injury and damage to the appliance. • Do not use the appliance: – if the mains cable or the water hoses are damaged, – if the control panel, worktop or plinth area are damaged so that you can get access to the inner side of the appliance.
Washing programmes Program Degree of soil Type of load Program description Pots Heavy soil Crockery, cutlery, pots Prewash and pans Main wash up to 70°C 2 intermediate rinses Final rinse Drying Regular Plus Normal soil Crockery and cutlery Prewash Main wash up to 65°C 2 intermediate rinses Final rinse Drying Quick 30 1) Normal or light soil Crockery and cutlery (Partial load) Main wash up to 65°C Final rinse Regular Eco 2) Normal soil Crockery and cutlery Prewash Main wash up to 50°C 1 int
3. Set the correct washing program for the type of load and soil. 4. Fill the detergent dispenser with the correct quantity of detergent. 5. Start the washing program. Use of rinse aid Caution! Only use rinse aid specified for dishwashers. Fill when the rinse aid indicator (B) becomes clear. Follow these steps to fill the rinse aid dispenser: 5 1 2 Caution! Do not fill the rinse aid dispenser with other products (e.g. dishwasher cleaning agent, liquid detergent).
– Make sure that glasses do not touch other glasses. – Put small objects in the cutlery basket. • Plastic items and pans with non-stick coatings can retain water droplets. Plastic items do not dry as well as porcelain and steel items. • Put light items in the upper basket. Make sure that the items do not move. Caution! Make sure that the spray arms can move freely before you start a washing program. Warning! Always close the door after you load or unload the appliance. An open door can be dangerous.
Caution! If the basket is in the upper position, do not put cups on the cup racks. Use of detergent Only use detergents (powder, liquid or tablet) that are suitable for dishwashers. Follow the data on the packaging: • dosage recommended by the manufacturer, • storage recommendations. Do not use more than the correct quantity of detergent to decrease pollution. 5 6 Different brands of detergent dissolve in different times.
When the washing program operates, you cannot change the program. Cancel the washing program. 2. Close the appliance door. The washing program continues from the point of interruption. Warning! Only interrupt or cancel a washing program if necessary. Open the door carefully. Hot steam and water can escape. • • 1. 2. 3. Cancelling a washing program • Press and hold the start/cancel button until the start/ cancel indicator light goes off. The washing program is cancelled.
Long periods of non-operation Do these steps when you do not use the appliance for a long period: 1. Disconnect the mains plug from the mains socket. 2. Close the water tap. 3. Keep the door open to prevent unpleasant smells. 4. Keep the inner side of the appliance clean. 5 Put the filter A in the bottom of the appliance. Install the flat filter correctly under the two guides D. 6 Put the filter system in position.
Fault code and malfunction Possible cause and solution • continuous flash of the start/cancel in- • The water tap is blocked or furred with limescale. dicator light Clean the water tap. • 1 flash of the 'Finished' indicator light • The water tap is closed. The appliance does not fill with water Open the water tap. • The filter in the water inlet hose is blocked. Clean the filter. • The connection of the water inlet hose is not correct. The hose can be kinked or squashed.
The cleaning results are not satisfactory There are streaks, milky spots or a bluish coating on glasses and dishes • Decrease the rinse aid dosage. Dry water drop stains on glasses and dishes • Increase rinse aid dosage. • The detergent can be the cause. Technical data Dimensions Width (mm) 596 Height (mm) 850 Depth (mm) 610 Electrical connection - Voltage Overall power - Fuse Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher door.
rect, the door does not catch on the sides of the cabinet. If the door does not close correctly, loosen or tighten the adjustable feet until the appliance is level. Adhesive steam protection foil If the worktop is removed, fit the steam protection onto the front part of the kitchen cabinet benchtop. 1 3 2 4 The steam protection foil is not supplied with freestanding models, but can be purchased from Electrolux Spare Parts.
If you connect the water drain hose to a trap spigot under the sink, remove the plastic membrane. If you do not remove the membrane, remaining food can cause a blockage in the drain hose spigot. The appliance has a security feature to prevent dirty water going back into the appliance. If, the spigot of the sink has a 'non-return valve', this valve can cause the appliance to drain incorrectly. Remove the non-return valve. Make sure that the water couplings are tight to prevent water leakage.
2. 3. 4. 5. 6. 7. 8. 14 ii) where you use the Appliance for commercial purposes, in Australia the period of 0 months and in New Zealand the period of 0 months, (if the period stated is 0 months you are not covered by this product warranty) following the date of original purchase of the Appliance; – 'you' means the purchaser of the Appliance not having purchased the appliance for re-sale, and 'your' has a corresponding meaning.
the cost of replacing the Appliances or having the Appliances repaired or of acquiring equivalent Appliances. Upon being replaced, parts and Appliances become the property of Electrolux; or – in the case of services, at its option, to the supply of the services again or the payment of the cost of having the services re-supplied; and in the case of Appliances or services supplied in New Zealand, loss or damage whether direct or indirect or consequential that is reasonably foreseeable.
www.electrolux.