User Manual Of Digital Set Top Box S7010PVR Please read this User Manual carefully to ensure proper use of this product and keep this manual for future reference.
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, install in accordance with the instructions. 8) Do not install near any heat sources such as radiations, heat registers, stoves, orother apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized plug.
Front and Rear Panel Illustration Remote Controller Remote Key Function: 1. MUTE: Used to turn the sound on or off. 2. NUMBER KEYS: Used to select channel numbers or input numbers in menus. 3. RECALL: Used to switch between the last two viewed channels. 4. INFO: Used to display information about the channel being viewed or further information about the program when in small EPG screen. 5. SUBTITLE: Used to switch between different subtitles that are broadcasted 6.
Installing the Batteries Connections Remove the battery cover from the remote control and put 2xAAA size batteries inside the compartment. The diagram inside the battery compartment shows the correct way to install the batteries. 1.Open the cover O PE N 2.Install batteries Caution: Make sure to check the voltage specification of the wall outlet is the same rating with the receiver. To prevent the risk of electric shock, do not open the cover or the back of the receiver. 3.
User Interface SETUP- Installation ( MY DISH ) Toneburst 01/01/07 00:02 SETUP- Installation ( MY DISH ) NONE Switch T OFF Toneburs NONE Set Location Exit Move Set LNB Set West Limi Page 1/8 NONE NONE NONE NONE Switch Exit Set East Limit Figure 3. DiSEqC1.2 Setting Figure 4. DiSEqC1.2 Motor Limitation Then user can press BLUE key to scan the focus satellite or RED key to scan multisatellites, as Figure 5.
2.Menu Operations Once the channel scan is finished and all the channels are stored into the database, you can start to watch the digital TV channel or listen to the radio broadcast, some typical operations are given in this chapter. 2.2.2.1 TV Format Set display format for watching program, such as 4:3LB, 4:3PS, 16:9PB,16:9AUTO. 4:3LB(LetterBox): Typically for wide screen content displays on conventional 4:3 TV with black bars above and below the picture.
2.2.5 Set Default Restore STB to factory default. All settings did by user will be restored to factory default values and the database will be erased together. 2.3 TV/RADIO There are two types of program: TV and Radio. The operation of the List and Guide of TV and Radio are almost the same. Herein take TV as example. 2.3.1 List User can operate some functions in List. See Figure9. TV List 01/01/2008 02:19 All No. Program Name TV Guide 2.3.1.8 Search User can search the program name by partial keyword.
Press button to set play mode as Repeat All, Repeating, Random, repeat Off. Press button to set fast forward speed as x2,x3,x4,Normal. Press button to adjust volume while playing. 2.4.3 My Movie My Movie can play most of MPEG2/4 files. It displays the played file name at the top left corner , and use the info key to get the current playing time and total time information while playing.
3.3 Volume Press button to adjust the volume. Press button to mute. If adjust the volume while mute, mute will be canceled. NOTE: FORMAT operation will delete all the files in the disk or the current partition, so please backup the files before FORMAT operation. 18/07/08 15:13 My Record 18/07/08 15:21 My Record- Recorded List 3.4 Program List Press button to display Program List with No., name and lock/scramble/skip status. Press to switch the program.
3.9 Subtitle Display the subtitle on screen, the style of subtitle may be different by content provider. See Figure 19. Press button to display subtitle setting page. Press button to select subtitle language, if the program has subtitle. Press button to exit subtitle setting page.
Specifications Item Specification Tuner Frequency Range 950MHz to 2150MHz Input Impedance Signal Input Level 75 Ohms unbalanced -65 ~ -25DBM Symbol Rate 2-45Mbps LNB Power 13/18 V, max.