M995 In-Vehicle POC Network Mobile Radio
Radio Body LCD Display Menu Function Operation 1.Contracts Group Call Individual Call/Single Call Good Friends Call 2.Settings LCD Backlight LCD Light Level Key Backlight Network Mode 3.Sound Key Tone Talk Tone Voice CodeMIC Gain SPK Gain 4.GPS Function 5.SIM CARD 6.
In-vehicle Radio Body 4G Antenna GPS Antenna Power Supply Cable Metal Bracket Speaker MIC Instruction Manual
Diagram 1.Volume Control Knob & Power ON/ OFF Button Please long press it to power ON or power OFF the radio. Turn the volume knob clockwise to increasethe volume level, turn the volume knob counter-clockwise to reduce the volume level. 2.LED Indicator It lights Yellows for few seconds during power on. It lights RED during transmitting. It lights GREEN during the receiving. 3.Emergency Alarm Please long press this button to activate the emergency alarm/SOS function, long press again to exit. 4.
.Functional Key. 16.Micro USB Programming Cable Connector Please short press to UP the groups and long press Please long press functional key - - and functional key - at the same time and to enter into Network Mode selection turn ON the radio device, it will enter into writing mode 7.Functional Key SET ACCOUNT Please short press to DOWN the groups and long GV7.A.2.ZZD ID: sfetest1 press to switch the Backlights Mode. 8.UP/DOWN/LEFT/RIGHT Key Please press it to choose the desired items from menu.
LCD Display Basic Settings CONTACTS SETTING SOUND LOCATION CARD DEVICE INFO abcd Tue GROUPS MEMBERS GOOD FRIENDS SET Carrier Network Signal Strength.It indicates valid carrier network signal strength 1.Press 4.Press ( indicates backlight always ON. test Tue Idle Status Current Week Day Current Date Current Own User Name to enter into MENU list 3.Select [GROUPS]and press Backlight Auto Mode.
LCD Light Level Good Friends Call 1.Press 1.Press to enter into MENU list 2.Select [CONTRACTS] and press 3.Select [GROUPS]and press 4.Press ( 2.Select [SETTINGS] and press to confirm and enter; to confirm and enter; to select target group and press UP, DOWN, to enter into MENU list, revert to front page, to confirm. 3. Select [LCD LIGHT LEVEL] and press 4.Press 1~level 5). revert to Key BackLight Settings 1.Press to enter into MENU list, 2.
Sound Voice Code 1.Press Key Tone Set Talk Tone Set Voice code MIC Gain 4K 3 5 SPK SET Gain 3 BACK to enter into MENU list, 2.Select [SOUND] and press 3.Select [VOICE CODE] and press 4.Press MIC Gain 1.Press 1.Press 2.Select [SOUND] and press to confirm and enter; 3.Select [KEY TONE] and press 4.Press to confirm and enter; to enter into MENU list, 2.Select [SOUND] and press to confirm and enter; 3.Select [MIC GAIN] and press 4.Press to switch ON or OFF.
GPS Function Location View: COG: SPD: ALT LAT: LON: SET 1.Press BACK to enter into MENU list, 2.Select [LOCATION] and press to confirm and enter. SIM CARD SIM CARD 1 SIM CARD 2 AUTO SET 1.Press 2.Select [SIM CARD] and press 3.Press BACK to enter into MENU list, to confirm and enter; to switch between SIM CARD 1, SIM CARD 2 and AUTO. Device Info - SOFT Ver: GV7.A.2 ZZD SET 1.Press BACK to enter into MENU list, 2.Select [DEVICE INFO] and press to confirm and enter.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
