Installation Manual – Module1 US-version 2.2 DHG Withey Court, Western Industrial Estate, Caerphilly, United Kingdom, CF83 1BF T: +44 (0) 800 043 0881 F: +44 (0) 845 459 9832 info@directhealthcaregroup.com Company Number: 05252571 VAT Registration Number: 241 6574 10 www.dhg-healthcare.
Content 1. Foreword 3 2. Declaration 3 2.1 Regulatory Approvals 2.2 EU Declaration of conformity 3. Technical specifications 3.1 9 10 Module1 Remote control 10 4. Mounting inside DHG products 4.1 7 11 Pairing of remote control 11 5. Disposal 12 6. Right of warranty 12 7. Approvals and certificates 12 DHG Withey Court, Western Industrial Estate, Caerphilly, United Kingdom, CF83 1BF T: +44 (0) 800 043 0881 F: +44 (0) 845 459 9832 info@directhealthcaregroup.
1. Foreword The MODULE1 is a generic radio receiver module for integration into various DHG products. The MODULE1 provides access to remote operation of the end products after installation The installation of MODULE1 will per. default be a factory installation. Post installation at the customer performed by DHG product service is not an option due to regulatory rules. It is important to read this manual before installing the “MODULE1”. This is an original user manual for the “MODULE1”.
End product statements The final end product e.g., Raizer must provide the following claims in the user manual for the product according to the regulatory rules specified for EU, US, Canada and Australia: The following Product Limited Warranty gives Resellers specific legal rights. You may have others, which vary from state/jurisdiction to state/jurisdiction Product Limited Warranty Subject to the terms and conditions set forth herein, DHG LTD.
published specifications for the Product; (c) the unauthorized installation, modification or use of the Product; (d) damage caused by: accident, lightning or other electrical discharge, water immersion or spray, or exposure to environmental conditions for which the Product is not intended; or (e) normal wear and tear on consumable parts, including by way of example and without limitation, batteries. DHG DOES NOT WARRANT OR GUARANTEE THE RESULTS OBTAINED THROUGH THE USE OF THE PRODUCT.
Limitation of Liability DHG’S ENTIRE LIABILITY REGARDING THE PRODUCT SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY RESELLER FOR THE PRODUCT.
FCC/IC The MODULE1 product comply with the FCC Part 15.249 and the Innovation, Science and Economic Development (ISED) Canada requirements RSS-210 The MODULE1 product complies with Part 15 of the FCC rules and with ISED license exempt standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
for Radio Equipment and Systems The MODULE1 complies with the essential requirements of the 2011/65/EU directive with amendment 2015/863/EU directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (ROHS 3). Complies with the essential requirements of the EU 1907/2006 regulation concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH).
2.2 EU Declaration of conformity Manufacturer: Address: Direct Healthcare Group Ltd Withey Court, Western Industrial Estate, Caerphilly, United Kingdom, CF83 1BF. T: +44 (0) 800 043 0881 Hereby declares that: MODULE1 for integration into other DHG products complies with: RED ROHS-Directive: 2014/53/EU, Radio Equipment Directive 2011/65/EU. substances in electronic equipment MODULE1 meets the relevant requirements notably in following standards: Article 3.1a: EN 62479:2010 Human exposure Article 3.
3. Technical specifications 3.1 Module1 Remote control 2,4GHz remote control: Class 3 Dimensions (L x W x H): 0,40 in. Weight: Frequency’s: Duty cycle Power: Supply: Water and dust: Working temperature: 104ºF Storage temperature: 158ºF Expected operational life: Short Range devices. Receiver 72 x 33 x 10mm / 2,83 x 1,30 x 10 g (0,035 lbs.
4. Mounting inside DHG products For Raizer II 1. Mount MODULE1 to adapter PCB and secure with clip. 2. Secure assembly to the side pocket using screws. 3. Connect signal ribbon to adapter PCB. 4. Position assembly in side cut-out of lower case 4.1 Pairing of remote control Pairing of the associated remote control is normally done by the dealer or the factory. Consult the end product user manual for detailed pairing instructions.
5. Disposal It is the duty of the owner to dispose of the MODULE1 in relation to the dispose of the lift product in accordance with the regulations applicable at the time. When disposing of this device, ensure compliance with local ordinances and regulations. Consider contacting your dealer for assistance with disposal. 6. Right of warranty The right of warranty is subject to the General Conditions for Supply which are presented here: https://www.directhealthcaregroup.
Notice statements according to CFR 47 Part 15.19 / RSS-GEN: The MODULE1 product complies with Part 15 of the FCC rules and with ISED Canada license exempt standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Déclarations selon le CFR 47 section 15.
is less than 20 mW. AUS/NZ: The MODULE1 complies with the AS/NZS 4268 requirements for 2.4 GHz transceiver. DHG Withey Court, Western Industrial Estate, Caerphilly, United Kingdom, CF83 1BF T: +44 (0) 800 043 0881 F: +44 (0) 845 459 9832 info@directhealthcaregroup.com Company Number: 05252571 VAT Registration Number: 241 6574 10 www.dhg-healthcare.
