Specifications

Product Overview
The wireless indoor siren is an accessory of smart alarm system. It could work for 24 months standby by 3 x AA
dry cells. It is easy to set up, reliable and safe. With core microprocessor and tamper device, it will alarm and
push will be showed in App once it is tampered. And it has an indicator to show the status of alarm system.
The indicator will light up for 1 second for every 9 seconds in the event of low battery and push notifi cation
will be sent on your APP.
Specifications
• Battery 3x AA dry cells
• Transmission Distance Up to 300m without obstacle
• Standby Current ≤110 uA
• Working Current ≤350 mA
• Siren Volume 90dB@30cm
• Lens Color Red/Blue/Yellow
• Working Temperature -10C°~50C°
• Humidity 90%rh (non-condensing)
• Tamper Device Supported
• Prompt Tone and Voice Adjustment Supported
• Battery Standby Time 24 Months
• Housing Material PC+ABS
• Indicator of System Status Yes
• Weight 115.0g(battery not included) 184.0g(battery included)
• Dimensions(L×W×H) 108mm×86mm×28mm
Appearances
Pairing with Alarm Panel
Scanning the QR Code for Pairing
1)Turn on the siren, to ensure the siren light is fl ash, if it is fi xed, please reset the siren to makes the siren light
fl ash;
2) Turn on the alarm system;
3) Scan the QR code of the siren, You can also scan the QR code saved in your phone album;
4) Name it, a er "Save", the pairing result would be confi rmed in App and indicated with 2 beeps from siren.
*Test: You can also press "Test" button in App to check whether the siren is paired successfully or not.
Accessories
1. 2 x Screws
2. 2 x Plastic Screw Bolts
Parameters and Settings
LED Indicator
On/Off Switch
Battery Case
Tamper Detector
Reset
Test Button
Mounting Screw Hole
Horn Outlet
Siren Duration
Volume Setting for SOS Tone
Volume Setting for Prompt Tone
Prompt Light for SOS Trigger
Lighting E ects
Working Status Home Arm Arm Disarm SOS
Lighting Modes Blue On Red On Green On
Red Flash
Sharply
Prompt Tone for Changing
System Status