User Guide

made in the
from recycled
materials
INSTALLATION INSTRUCTIONS
1
No digging required. Using
a spade or shovel, clear the
area where edging is to be
placed of turf and debris.
Place the edging in the
desired shape and location
on cleared surface with
the anchoring tabs facing
toward the planting bed.
2
Hammer the included
anchoring spikes through
the tabs to hold the edging
in place. The maximum
spacing of the spikes is every
4'. If you desire additional
anchoring, spike packs are
available separately.
HELPFUL TIPS
• PROTECTIVE EYEWEAR: During installation it
is recommended to wear protective eyewear.
• WEAR GLOVES: Gardening or work gloves
are recommended when handling.
• CUTTING: When cutting edging for best
results it is recommended to cut at the midpoint
between the anchoring tabs using hand snips or
a fine tooth saw.
LANDSCAPE DIVISION
Marietta, OH 45750
FOR BOTH
SMOOTH
TOP AND
SCALLOP
TOP LOOKS
SMOOTH TOP EDGING SCALLOP TOP EDGING
• Use for an innovative,
decorative look
• Use for a traditional,
clean line look
3
Backfill to the top of the
edging with mulch or
other groundcover.
When joining two pieces of EasyFlex
®
edging, use the
included overlapping connector. It is designed to overlay on
the top of the end tab of each piece, so that when spiked, it
minimizes the gap between two pieces of edging.
NO
DIGGING
REQUIRED
USING THE CONNECTOR