O AM SK YE Full User Manual for YESKAMO Security Camera Kits
Letter of Thanks Dear Customer; Thanks for your trust to purchase security camera system from YESKAMO and please accept our sincere apprecia�on here. Thanks again for your suppor�ng, with which we can insist on our dream; can have faith to try our best to develop YESKAMO®; and that YESKAMO® has become a world-leading brand of innova�ve video surveillance products and solu�ons. AM O YESKAMO always place customers’ needs as our top priority.
2 2 2 3 Guide 2 1. How to login the NVR Monitor system? .................................................................... 2. How to remotely view camera on phone app? ............................................................ 3. How to customize recording mode? ............................................................................ 4. How to setup E-mail alert, app no�fica�on and IPC camera siren alarm? ................ 5. How to add a new camera to YESKAMO NVR via Ethernet cable? ................
Guide 1 I. Statement 1. Though we apply all efforts to make the manual complete and accurate, there could s�ll be some discrepancies due to products’ �mely update. 2. The products and manual are subject to change without previous no�fica�on. 3. The content in this manual is only for users’ reference. We don’t promise it’s exactly the same with the products you purchase. Detailed informa�on is in accordance with the final products. II. Safety Cau�on YE SK AM O 1.
When people transversely across PIR detec�on area as above picture, the camera will detect the movement sooner. When people goes straight to camera as above picture,the PIR sensor will not so sensi�ve. AM O Note: A passive infrared sensor (PIR sensor) is an electronic sensor that measures infrared (IR) light radia�ng from objects in its field of view. They work en�rely by detec�ng infrared radia�on (radiant heat) emi�ed by or reflected from objects.
Guide 2 1. How to login the NVR Monitor system? AM O Default user name is “admin”, Default password is no password, leave it blank. And click “Ok” to enter NVR monitor system. SK 2. How to remotely view camera on phone app? YE 1) Make sure the NVR monitor is ONLINE status: Connect the WAN port of NVR monitor to LAN port of router with Ethernet cable, then the NVR monitor will be ONLINE.
2) Download free app Search free APP “YESKAMO” , “EseeCloud” in App store or Google play.The phone app will be updated some�mes, if your phone app menu is different from the menu in user manual, please contact us to get the latest user manual EseeCloud YESKAMO SK AM O 3) Create an account and log in phone app Register an account with your email address /phone number and password. A verifica�on code will be send via text.
O AM YE SK B: Other way to add: Enter APP > click “+” in the right top corner or center of the phone > “Other ways to add”> Input “Device Cloud ID”> the default password is no password, click "Add" and "Complete"to finish A B -6-
---Cloud ID: A: Right click the mouse to enter main menu> Fast network> Cloud (P2P) B: Right bo�om corner of the monitor C: The label on the NVR/Monitor ---Name of device: customize the system name (such as home, office, room...) ---User Name: default is admin (the same as your NVR monitor) ---Password: default is no password, leave it blank/empty (same as your NVR monitor system) YE SK AM O 5) Remotely view camera via phone app: Double tap the screen, and you can view camera anywhere any�me.
Note: The camera system supports mul�ple account to view at same �me, merely, mul�-user can view the cameras on their phone at same �me, but only one user can use the “microphone” at one �me, it will show “intercom open failure” when second person click “microphone” bu�on, he can enter the chat screen once the former person hang up and exit the chat screen.
7) Share device func�on SK AM O Click "share" you can share the device wit your friends or families YE Note: Please revise your password in NVR system before sharing. 3. How to customize recording mode? The default recording mode is 24/7 con�nuous recording, but you can change it to �me scheduled recording or mo�on detec�on recording based on your requirement.
1) Mo�on detec�on recording for PIR alarm camera Right click mouse to enter main menu > System Setup > Record setup > Record plan > Select channel (PIR camera) > click “Reset” > click “Time”> click “Mo�on” > customize schedule �me with mouse > click “Apply” and “Ok” to save the se�ng.
B: set up mo�on detec�on (same opera�on as PIR camera) Right click mouse to enter main menu > System setup > Record setup > Record plan > select Channel (normal camera) > click “Reset” > click “Time”> click “Mo�on” > click “Mo�on”> customize schedule �me with mouse > click “Apply” and “Ok” to save the se�ng. 4. How to setup E-mail alert, app no�fica�on and IPC camera siren alarm? O There are 4 types alert for mo�on detec�on: Buzzer, Email alert, phone app no�fica�on and IPC Alarm.
YE SK AM O B: Setup alert for standard camera B1: disable PIR func�on first: Right click mouse to enter main menu > System Setup> Channel Setup> Video Detec�on> Select Channel (normal camera) > Disable “PIR” > click “Apply” B2: Right click mouse to enter main menu > System Setup > Channel Setup > Video Detec�on > Choose Channel > Enable Mo�on> Enable Mo�on Alert (Buzzer, E-Mail No�ce, APP Alarm, IPC Alarm) based on your requirement > click “Apply” and “Ok” to save the se�ng.
How to set up email on NVR, take xxx@hotmail.com as example: Enable E-mail func�on SMTP Provider: hotmail Sender: xxx@hotmail.com Password: password of your mail xxx@hotmail.com SMTP Server: smtp.live.com Port: 25 or 587 Encryp�on type: TLS Sendee1: The email you want to receive the email alert (you can use the xxx@hotmail.
AM O 5)Setup Phone no�fica�on Enter your phone >Se�ngs >No�fica�ons >Find "Eseecloud" or "YESKAMO"> Enable it SK 5.
4 Right click mouse to enter main menu > Video Manage The upper box shows informa�on of camera, and lower box shows channel informa�on of NVR 5 If the channel status at lower box shows “IPC Disconnect”, “Connect Fail”, “ Different Segment” ..., select that channel with mouse, then click “Delete” and the status of that channel will be “No video source” 6 Click “Search” in the upper box, new IP address will pop up in minute and then click “Match Code”.
SK AM O Reset button 3. Wireless add 3.1 Right click mouse to enter main menu > click “Wireless Add” with le� mouse bu�on when you hear voice prompt “Pairing mode” 3.2 5 seconds later, you will hear voice prompt “Wireless se�ng, please wait” 3.
Step3: Run CMS so�ware: A: install the so�ware on your computer and log in Default User Name: admin Default Password: no password, leave it blank/empty, and click “Login” YE SK AM O B: Add Device: Click “add” on the top right corner of computer management so�ware > “Cloud ID” > input device informa�on and click “Finish” to add the camera system to CMS client.
O Step 4: View Camera on computer: A�er you add device successfully, please double click the device cloud ID to open all channels or double click each channel one by one to get the videos AM 8. How to playback the recorded footage on computer? YE SK A: Install and add the device cloud ID on computer management so�ware.
O 9. How to backup video footage on computer? YE SK AM A: Install and add the device cloud ID on CMS client. (Refer to 7 “How to remotely view the cameras on computer”) B: Click “Playback” icon at tool bar> then choose one channel and click “Download” icon, the whole recorder footage of this channel will pop up. Here please choose the footage you need, click download icon below “Operate” and no�fica�on will pop up with the file store path; 10.
O AM If you want to play the backup file on your computer, please contact us directly to get “Pot player”. 11. How to playback recorded footage on monitor? YE SK Right click the mouse to enter main menu > Video Playback > here you can choose date, channel, record mode, �me range, then click “search” to find the exact video based on your search condi�on. A: Playback can be controlled through the playback process bar. B: You can playback video of 4 channels simultaneously.
12. How to backup video footage on monitor? AM O A: Connect the USB disk to one of USB port of NVR monitor. (The USB disk format must be FAT32) B: Right click mouse to enter main menu > Video Backup C: Choose “Channel, Recorder Mode, Search Time”, and then click “Search” and get the recorded video list (check video to backup) D: Select the file you want to backup and click “Backup” bu�on 13.
14. How to avoid the repeated mo�on detec�on alert? AM O The mo�on triggered alerts generated when camera detects any movement and you get an instant alert for this movement. But some�mes, there could be too many alerts. Please try to set up the mo�on detec�on area to avoid unnecessary repeated alerts.
15. How to choose place to install wireless camera? The NVR monitor has a built-in router and the cameras receive the wireless signal from the NVR monitor. So it is suggested to place the NVR monitor at the center of monitoring area and avoid any avoidable obstacle between the cameras and the NVR monitor and keep the antenna of camera parallel with NVR monitor’s antenna.
17. How to do if I forget new password? YE SK AM O Default user name is admin; Default password is no password, leave it blank. If you’ve changed password and forget it: 1 Click “OK” and it will show “User Name/Password is incorrect”; 2 Move mouse arrow to anywhere of interface that pops up (don’t click “OK” here) 3 Then click le� mouse bu�on and click right mouse bu�on, click le� and click right, le� and right...repeat several �mes, un�l you get new interface “Restore default user...
4 At the last interface, you can reset new password or you can click “Ok” directly and the system password will be default password again (No password) O 18. How to reset the NVR system to factory se�ng? YE SK AM Right click mouse to enter main menu > System Setup > System Admin > Factory Se�ng > click “Apply” and the NVR monitor system will be reset to factory se�ng 19.
AM O E.g for Time Zone: London: +00:00; Beijing: +08:00; New York: -05:00 Note: A: In case you are using Daylight Saving Time (DST), a�er you select �me zone and date format, please check whether the system date and �me shown on the NVR monitor is same with your local �me. If it is different with your local �me, please reset the �me zone again. B: On NVR monitor screen, The NVR system �me is shown on the right top corner of each screen. 20.
Note: A: When you download upgrading so�ware to your USB disk, please put it in root directory, and don’t click/open the file, the system will auto-recognize the file and upgrade. B: please keep the monitor powered during the upgrading process, or the upgrading will fail. C: All se�ng will back to factory default se�ng, please reset the NVR system again if you need. 21.
22. How to install hard drive for NVR ? The NVR monitor may includet include hard drive. If you bought a NVR monitor without hard drive or you want to replace the pre-install hard drive with bigger size please install hard drive by yourself. Before you install the hard drive, please unplug the NVR recorder from power source.
Video Instruction O Note: A: NVR system can max support 6TB hard drive, and it only works with the internal 3.5” SATA hard drive (such as Seagate, WD, TOSHIBA...) B: A�er install the hard drive, please firstly format the hard drive disk before recording. YE SK AM How to format the hard drive: Right click mouse to enter main menu> System Setup> General Setup> HDD Setup> Enable “Format” > click “Format” bu�on 23.
AM O Note: A: If you choose phone app or email alert for this camera, please make sure your camera system is online, so that you can receive the alerts. For more informa�on, please refer to detailed user manual. B: If you want to setup the same alerts for all channels, please repeat above steps or click “Copy to all”. 24. How to turn off the floodlight at night? SK This floodlight camera has a built-in PIR sensor and floodlights.
Floodlight Camera IR Cut Mode Day Standard Camera Night Day Night Color Picture Black & White Daylight Color Picture Totally black once ambient light is insufficient, floodlight will never turn on Color Picture Totally black once ambient light is insufficient Night Black&White Black & White, floodlight will never turn on Black & White Black & White Color picture Color picture, floodlight always turns on at night Black & white when No one passby, and floodlight switch on to Color Picture offer colo
YE SK AM O 1 Plug the whole system and home router to power socket 2 Connect the WAN port of NVR to LAN port of home router, and also connect camera to LAN port of home router via Ethernet cable 3 Right click mouse to enter main menu >Video Manage The upper box shows informa�on of your camera, and lower box shows channel informa�on of your NVR monitor 4 At lower box, choose which channel / camera that you want to hard wire with home router, click “Delete”, then the status of that channel will be “No Vid
1 Mount IP camera outside; 2 Drill a hole to across the extension cable; 3 Mount wifi antenna closer to NVR recorder. IP Camera 27. How to booster camera signal via camera’s repeater func�on? O The main func�on of repeater is to increase the distance of signal transmission by re-sending or forwarding the data signal. Both camera and IPC repeater can work as transmi�er to strengthen camera’s poor signal caused by long distance or physical obstacles as walls.
O AM SK Note: A: Before se�ng up repeater func�on, please confirm the camera which work as a repeater with strong signal, if not, the setup will fail. YE B: If the line between NVR and CH1 is red, it implies you can’t use this camera on CH1 can’t work as repeater. If the line between CH1 and CH2 is red, it implies the repeater setup is failed. 28.
SK AM O 3 Use Ethernet cable to connect IPC repeater with NVR recorder YE 4 Right click mouse to enter main menu > Video Manage > click ”Search”> the informa�on of repeater pop up in the upper box -35-
AM O 5 Double le� click “REPEATER” in the upper box, the repeater’s connect informa�on pop up in a new box, then le� click “Match” icon. 6 The “Status” shows “Wireless has been matched” if match succeed. YE SK 7 Remove the Ethernet cable between IPC repeater and NVR recorder. 8 Back to “Video Manage” interface, click the “Repeater” icon in the lower box.
9 Click the “+” behind “Router”, and then choose the channel (CH1 means channel 1, camera 1) which you want to expand signal. Then click “Apply” and “Ok” to save the se�ng. O Green Line YE SK AM Note: The green line between NVR and channel (or router and channel) indicates the connec�on is successful. The red line indicates the connec�on failed. 10 The IPCAM indicator light at front panel will turn on. Number 1, means one camera connected 11 Now you can unplug and move the repeater and cameras.
FAQ 1. What if one camera stops working and doesn’t show picture on the monitor? Please firstly confirm it is camera problem or adapter problem as below steps: SK AM O 1 Please connect the un-working camera with a good adapter and then cover the camera’s IR-cut filter to check whether the IR-LED turn on in the darkness. YE 2 If the IR Led doesn’t turn on in the darkness, the camera is defec�ve and there is something wrong with the camera’s power cord.
NVR op�onal output resolu�on: 1024x768, 1280x1024, 1366x768, 1440x900, 1080P@50Hz, 1080P@60Hz 3. What if I can not remotely view the cameras on phone app? AM O 1 If you want to remotely view the cameras on phone app, please firstly connect the WAN port of NVR monitor to LAN port of router to make the system online. 2 If your NVR monitor is online, but you cannot view the cameras on phone app, please contact us at usservice@yeskamo.com (for US), ukservice@yeskamo.com (for UK) 4.
5. What if I cannot receive alert on phone app? AM O 1 First,please enable the puch no�fica�on for the phone app in your phone se��ng.You can follow the guide as below. Difference phone may have difference se�ng,you need to do it according to your phone se�ng.
9.What if I couldn't find the hard drive informa�oin on my NVR system? 1 First, please make sure you are using 12V 2A or 12V 3A power adapter for the NVR/Monitor. 2 Secondly,please have a check at the hard drive and see if it is an internal 3.5 inch SATA Hard Drive. 3 Thirdly,please check if the hard drive are installed correctly,you can view the video guide in the follow link: h�ps://yeskamo.com/pages/video-guide 4 If you have done it and s�ll didn’t work, please email us at usservice@yeskamo.
11. What if my monitor show Gateway Unreachable? 1 Please have a check at the ethernet cable and see if the ehternet cable has the problems.Try to use the ethernet cable for other device and see if it works. 2 Please have a check at your home router and try to restart the router again and see if it work. 3 If you have check the ethernet cable and router and s�ll not work,please do as follow to fix this problems: AM O 1)Please find out the IP Address and DNS of your router and type it in the NVR system.
SK AM O 2)Please enter your phone se�ng then click WLAN,then click the wifi you have connected and click the “i”and then you will see the ip address and DNS of your home router. 3)If you couldn’t find it please email us at usservice@yeskamo.com/ukservice@yeskamo.com and we will help you about this. YE b.A�er find your IP Address and DNS,please type it in your NVR system. 1)Right click mouse to enter the main menu of the NVR,then click system setup>netwrok setup.
-44- O AM SK YE
Afterword Incorporated in Shenzhen in 2006, YESKAMO has been a world-leading brand of home security camera system provider. With the latest security technology, we are dedicated to providing price-reasonable and user-friendly security camera kits for home and business use. YESKAMO security camera models range from common wireless home security camera O system and POE camera system. With professional engineer team, we have depth-vision to produce the exact models to meet customers’ needs.
O AM SK YE www.yeskamo.com YESKAMO CAAB V3.0 For any ques�ons, please contact us: Email: usservice@yeskamo.com (for US) ukservice@yeskamo.