Instruction Manual

20 mm
31.2 mm
2.7mm
SIZE: 166*90MM
材质：“黑白双铜，MIX FSC”
Set in Stone Wireless
Charging Desk Clock
Instruction Manual
7143-28
1 x Wireless Charging Desk Clock
1 x AA Battery
1 x Instruction Manual
Input: 5V/2A
Wireless Output: 5W
Setting the Clock Time:
For the desk clock to work, a AA battery
is required.
On the back of the clock there will be a
AA battery in the battery compartment(5).
Remove the plastic film on the battery,
and insert the battery inside again.
Once the clock has power, set the desired
time by turning the time setting dial(4)
counter-clockwise or clockwise.
Wireless Charging Mobile phones and
other electronic devices:
Connect the USB cable(6) of the desk
clock to a power source. LED indicator
(2) will glow RED when the device is in
wireless charging standby.
Place the wireless charging supported
mobile device on the wireless charging
surface(1), LED will glow BLUE when
device is charging.
Phone will begin to charge automatically,
wireless charging LED(3) will turn off when
the device is fully charged.
Once fully charged remove the device.
Note: When wireless charging, if the LED
a wireless charging device or there is an
object between the device and charging
surface interfering with the charging.
process.
1.
•
•
•
2.
•
•
•
•
**
1.
2.
3.
4.
5.
6.
•
•
Wireless Charging Surface
LED Indicator
Clock Face
Time Setting Dial
AA Battery Compartment
USB Cable
What’s included:
Functions:
Instructions:
WARNING-When using this product, basic
precautions should always be followed:
Read all the instructions before use.
Never store or use this product in
temperatures below 32°F(0°C) or above
115°F(45°C).
Do not overcharge your phone. The
unit may become hot under excessive
use. Remove your phone once it is fully
charged. Never charge your phone for
more than 7 hours at a time.
To reduce the risk of injury, close
supervision is required when the product is
used near children.
Do not expose the device to moisture.
Do not use the device in excess of its
output rating. Overload outputs above the
Do not use the device if damaged or
Do not disassemble the device. For
professional. incorrect reassembly may
or temperatures above 104°F may cause
explosion.
use only identical replacement parts to
ensure product safety.
Attachments on the back of your phone
can impede the effectiveness of the
wireless charger, and lead to overheating.
Please remove any attachments from the
phone before charging on this device,
attachments can interfer with wireless
charging and lead to over heating.
•
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
SAFETY PRECAUTIONS:
13. This product is made from cement.
If drop, it may crack. Please handle with
care.