USB CONDENSER MICROPHONE, STUDIO WITH DESK STAND Quick Installation Guide DA-20300
Table of Contents 1. Introduction ................................................................................ 3 2. Feature ........................................................................................ 3 3. Package Content ......................................................................... 3 4. Specifications .............................................................................. 4 5. Microphone setup.......................................................................
1. Introduction The DIGITUS USB PC Condenser Microphone is ideal for audio recording, video conferences, phone conferences, gaming or live streaming. The recording microphone is delivered with a 1.5 m long USB cable and a stand. The microphone supports directional recording with cardioid characteristics, which reduces disruptive environmental noise. Ideal for professional use in offices or private settings to communicate with family or friends on video calls, as well as for gamers and audio/video streamers.
. Specifications 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Frequency response: 30Hz-20 kHz Sensitivity: -34dB ± 2dB (0dB = 1V/Pa at 1kHz) Output impedance: 150Ω ± 30% (at 1kHz) Load impedance: ≥1000Ω Equivalent noise level: 16dBA Maximum sound pressure level: 130dB (at 1kHz ≤1% T.H.D) Signal to noise ratio: 78dB Electrical current: 3mA Material: Metal Cable length: 1.5M Polar Response 5. Microphone setup 1.
6. Power requirements 1. 2. 3. 4. The microphone is powered by the USB port of the used device, meaning that in most instances you can just plug the microphone in and get started right away. The is plug & play USB device, compatible with both Windows and Mac computers. Placement of the Microphone and relative to the vocalist may by varied on several factors including room acoustics, the vocal performance, and whether the vocalist has a high or deep voice. Best receiving distance is 15cm (6”).
3. 4. 5. 6. 7. The sensitivity of the microphone can be adjusted in real time through the sound card attribute microphone. It can be adjusted well according to personal preference Can monitor the size through the total volume of the computer If the desktop microphone is used alone, the original sound card device can be disabled on the computer device to prevent conflicts If the computer cannot recognize the desktop microphone, choose to disable the original sound card.
Adjusting the input level on a Windows computer: Step 1: Right click the computer right voice Icon, enter the sound control panel, and click record 7
Step 2: Select the microphone, Click on the properties below Step 3: Click Advanced, select 48000Hz, Finally, click OK 8
Control the microphone 1. From the Sound control panel, on the Playback tab, right-click on Speakers Default Device and select Properties. 2. On the Levels tab, adjust the Microphone volume slider to adjust the level of microphone monitoring. NOTE 1. Do not cover the microphone grille with your hand 2. Regular maintenance is recommended to avoid electricity erratic and acoustic problems. Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping content.