User’ s Guide DMT6000 CXCI
DSR - Digital Satellite Receiver CONTENTS Page Page Safety For your safety Outdoor Use Marking Cable System Installation Marking Polarized Attachment plug Marking Important Safety Instruction 3 4 4 4 4 5 FCC Information 9 General Information Main Features For Your Safety Unpacking General Operation Remote Control Unit (RCU) Front Panel Rear Panel 10 10 11 12 12 13 14 15 Installation 16 Connecting to Antenna & TV 16 Connecting to TV & VCR using SCART16 Connecting to TV using RCA support 17 Connecti
Safety COUTION : TO REDUCE THE RISK OF ELECTRIC SHOK DO NOT REMOVE COVER(OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lighting flash with arrowhead symbol, Within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’ s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Safety For Your Safety •The space around the receiver should be clear •Do not remove the cover to allow for proper ventilation of the receiver. •Do not cover the Receiver or place it on a unit • Do not allow the unit to be exposed to hot, cold or humid conditions that emits heat • Never allow liquids, spray or other materials to come into contact with the inside of the Receiver. • Use a damp soft cloth to clean the casing. •Do not connect or disconnect cables when the Receiver is plugged in.
Safety Important Safety Instruction 1) Read Instructions :All the safety and operating instructions should be read before the product is operated. 2) Retain Instructions :The safety and operating instruction should be retained for future reference. 3) Head Warnings :All warnings on the product and in the operating instructions should be adhered to. 4) Follow instructions :All operating and use instructions should be followed. 5) Cleaning :Unplug this product from the wall outlet before cleaning.
Safety Important Safety Instruction 13) Grounding or Polarization: This product may be equipped with a polarized alternatingcurrent line plug(a plug having on blade wider than the other). This plug will fit into the power outlet only on way. This is a safety feature. If you are unable to insert the plug gully into the outlet, try reversing the plug. If the plug should still fail to fir, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarizing plug.
Safety Important Safety Instruction 20) Object and Liquid Entry : Never push objects of any kind into this product through opening as they may touch dangerous voltage points or short-out parts that could result in a fire of electric shock. Never spill liquid of any kind on the product. 21) Serving : Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all serving to qualified service personnel.
Safety Important Safety Instruction Picture 1) Example of Portable cart warning (Symbol provided by RETAC) Picture 2) Example of antenna grounding as per national Electrical code, ANSI / NFPA 70 -8-
FCC Information This device complies with part 15 of the FCC Rules, Operation is subject to the following two conditions : (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limit for a class B digital device, pursuant to part 15 of the FCC Rules.
General Information A Digital Satellite Receiver is a convenient product that you allows to view a variety of programs provided through satellite. This’ suser guide covers the installation of the DSR and the necessary steps to operate various features. Thisxplains also e special features available only in this DSR in detail, and will allow you tofull make advantage of these feature.
General Information For Your Safety This STB has been manufactured to meet international safety dards. stanPlease read all of the safety and operating instructions before operating the product. And keep all safety and operating instructions for future reference. 1. Main Supply : 90 -250V AC, 50/60Hz, 30W 2. Overloading Do not overload a wall outlet, extension cord, or adapter is may as thresult in fire electric shock. 3. Liquids Do not expose the STB to rain or moisture. 4.
General Information Unpacking Make sure you have received all the items in the Satellite verRecei carton. Digital Satellite Receiver DSR Remote Control Unit User’ s Guide Batteries AAA AAA General Operation Throughout this manual you will notice that the everydayon operati of your DSR is based on a series of user friendly on screen display and menus. menus These will help you get the most from your DSR, guiding you through installation,l channe organizing, viewing and many other functions.
General Information Remote Control Unit (RCU) Key Function Turns power ON/OFF of the DSR When watching a channel, mutes the sound 0~9 Enter number of the required menu item or select a channel number to watch.
General Information Front Panel Key MENU Function Shows the main menu and command box on the screen. OK Executes the selected item in the menu. ESC Returns to the previous menu on the menu screen. Turns on and off the power of the receiver. CH When watching, changing to the previou s and next channel, or moves to the next higher or lower item in the menu. VOL When watching a channel, adjust the volume or move to the left or right item in the menu.
General Information Rear Panel Connect to Digital Amplifier Power ON/OFF Connect to 12V to an external 0/12V switch AC Power Code Connect to the S-VHS Jack of TV or VCR Connect VIDEO to TV using RCA Jack Connect to AUDIO R/L to TV or AUDIO TUNER Connect to TV or VCR Connect to TV ANT INPUT Connect to a PC for S/W Upgrade LNB IN : Connect to Satellite Antenna LNB OUT : Connect to the other receiver -15-
Installation This section explains the installation of DSR. Refer to the alsmanu supplied with the equipment for the installation of outdoor equipment such as the dish na. anten When adding new equipment, be sure to refer to the related parts of the manual for the allation.
Installation Connecting to TV using S-VHS support Connecting to TV using RF support -17-
Installation Connecting to Digital Amplifier -18-
Menu Information Once you properly installed and connected cables of the DSR, e menu th will be displayed This menu consists of 6 main menus as follows. - Channel Manager - Program Guide - Timer - User Installation - Common Interface - Receiver Information To move up and down, press “PR+ or PR -”. To move left and right, press keys on the RCU. Place cursor on the “User Installation ”, then sub-menu will be displayed on the screen.
User Installation This menu consists of 5 sub-menus as follows. - Antenna Setup - Channel Search - System Setting - Parental Lock - Factory Default Antenna Setup-1) DiSEqC 1.2 1)Antenna : You can select maximum 16 antennas with the combination of switches. 2) Type : Select your antenna type to be DiSEqC1.2 3) Univ. LNB: Select your LNB type. If you have universal LNB, select YES otherwise select NO. 4) LNB Freq.
User Installation 7) East, West Limit : Press E key on the RCU continuously until your antenna reaches to the easternmost point and then pressOK key on the RCU. The message of“Would you like to set East limit of DiSEqCmotor? ” will be displayed for your confirmation. Place cursor on the “OK” and press OK key on the RCU to confirm the East limit. Then, the value of East Limit will be changed to “set be ”. To set West limit, take the same steps as East limit.
User Installation Antenna Setup-2) Fixed 1) Antenna : You can select maximum 16 antennas with the combination of switches. 2) Type : Select your antenna type to be Fixed. 3) Univ. LNB: Select your LNB type. If you have universal LNB, select YES otherwise select NO. 4) LNB Freq. : Enter the proper LNB frequency referring to your LNB using numeric key on the RCU or use KEY PAD displayed by pressing OK key.
User Installation Channel Search-1)DiSEqC 1.2 1) Antenna : Select your antenna number. 2) Satellite : Select a satellite using keys or if you press OK key. Then, the list of satellite will be displayed so that you can select easily. You can see the information of the selected satellite in the right side. Edit Mode : If you want to edit those preprogrammed data such as Transponder, Frequency, Symbol Rate, Polarization, Skew and 22 KHz, please press MENU key on the RCU to display the command box.
User Installation 6) Polarization : SelectHor or Ver. 7) 22KHz : Select ON or OFF. 8) Search 1 Sat : DSR allows you to search channels with convenient options as follows, select one using arrow keys. -Search 1 SAT : Search channels in one satellite which selected on Satellite column. -Search TP : Search channels in one TP which selected on TP column. -Search Network : Search Channels transmitted by satellite network information table(NIT).
User Installation 12) Re-Sync : When all location of searched satellites are shifted by unknown reason, you can realign all of them at once if you adjust one satellite ’ s location. 13) Go to 0o for DiSEqC1.2 : When you install the motor of DiSEqC1.2 antenna at first, you can select this function to move o 0 the center of antenna to be 14) Search Option : DSR allows you to search channels with convenient options as follows.
User Installation Channel Search-2) Fixed 1) Antenna : Select your antenna number. 2) Satellite : Select a desired satellite using 56 keys or if you press OK key, the list of satellite will be displayed so that you can select easily. You can see the information of selected satellite in the right side. 3) Edit Mode : If you want to edit those preprogrammed data such as Transponder, Frequency, Symbol Rate, Polarization, Skew and 22 KHz, please press MENU key on the RCU to display the command box.
User Installation System Setting System Setting menu provides variety of choice which is matching to your environment. 1) OSD Color : You can select the color of Night, Ocean, Wine, Grass. 2) OSD Language : Select your desired OSD Language. 3) Audio Language : Select your desired audio language to be in the top priority under the condition that this language is support -ed from the channel. 4) LNB power : The default value of LNB power is ON. Select Off in the case of the LNB power is not necessary.
User Installation Parental Lock This function allows you to lock the channel with your password in order to prevent from accessing the channel by your children or any other person. And also you can protect your installed data and information by using Install Lock. ★ How to change Password 1) Enter the current password. 2) Select ON of Parental Lock. 3) Enter new password. 4) Confirm your new password by entering new password again. Note : Default password is 0000.
User Installation ★ How to use Install Lock 1) Enter the current password. 2) Select ON of Install Lock 3) Enter new password 4) Confirm your new password by entering new password again 5) Exit this menu and Turn off the DSR 6) Turn on DSR key on the RCU and pressMENU 7) Select any menu and press OK on the RCU . 8) Then Enter Password Box will dis beplayed. 9) Unless enter correct password, you can not run any menu.
Common Interface DSR makes you enjoy various scrambled channels encrypted Viaccess by , Nagravision , Irdeto, Conax, Cryptoworks and SECA. Preparing To be able to receive scrambled digital satellite channels you will need Smartcard a and a Common Interface CA (Conditional Access) module form the Service Provider of your choice. The Smartcardand the CA module may also provide access to special menus not described in this manual. If so, please follow the instructions from the Service provider.
General Function The following describes the basic functions of your DSR while watching satellite TV or listening to satellite radio. DSR enables you to watch various scrambled channels by inserting the CAMs and Smartcards according to your choice. While watching, the current channel information will be shown on the bottom of the screen if you pressINFO button on the RCU.
General Function Pause the frame PressPAUSE key on the RCU to pause the screen. To bring it back to the normal mode, press PAUSE key once again. Previous channel recall Press ← PR key on the RCU to move the previous channel which you were watching before the current channel. TV & Radio mode While watching a TV channel, press TV/RADIO key on the RCU to move to the radio mode. Press this key once again, it will bring you back to the TV mode.
General Function Channel Information Every time you change channels, you will receive program information for a few second. While watching channel, you can see the current channel information anytime by pressing INFO key on the RCU. Note : Channel information will be displayed for 6 seconds and disappeared. You can adjust the display time interval from 2 to 12 seconds. Volume & Audio Control 1) Volume Control To increase or decrease volume, use the RCU or keyon the frontpanel.
Channel Manager DSR provides most powerful channel managing function in the d and worl this function allows you to have a more interesting and useful operation as well as watching channels simply. Channel Manager Channel Manager consists of TV Channel and Radio Channel. Press OK key placing the cursor on the TV Channel. Note :Since the operation of Radio Channel is same as that of TV channel, in this manual only TV Channel is explained.
Channel Manager Favorite When you select channel manager, default favorite list will be showed on the screen as Favorite 1. Select your favorite channel and then press OK key. Then will be marked at rear of your selected channel name. And if you want to delete the channel name in the favorite channel list, press OK key once again, then the mark will be disappeared.
Channel Manager Lock In the TV Channel Manager Page, press MENU key on the RCU, and select Lock on the command menu. This Lock command allows you to lock the channel. First, select the channel, which you want to lock and pressOK key and then, will be marked at rear of the selected channel name. Note : To perform this function, you should set up the Parental Lock in advance. Rename In the TV channel Manager Page, press MENU key on the RCU, and select Rename on the command menu.
Channel Manager Delete In the TV Channel Manager Page, press MENU key on the RCU, and then select Delete on the command menu. Then, sub-menu like Delete CH, TP, Satellite and all will be displayed. This Delete command allows you to delete the channel permanently. First select the channels, which you want to delete, then selected channel number will be changed to yellow X mark. If you cancel the selection, press OK key again, then the number will be back.
Channel Manager Fast Edit mode Fast edit mode allows you to edit channel faster than normal without showing channels selected. If you turn off the Fast edit mode, DSR will show each channels selected in the small PIG screen and it takes few seconds more to edit channels. Go To Function GoTo function enables you to go to any page of the menu tree by the adoption of Open Architecture Concept for the implementation of software. This powerful function makes the menu system to be user -friendly and easy -touse.
Electronic Program Guide(EPG) DSR provides EPG function for you to get access to the TV Guide(or Radio Guide if you are listening to radio channels) which will show the titles and other information of the current and next programs on different channels. The information is only available from the network of the channel you are watching. To see the EPG data, press EPG key on the RCU when watching a channel or select Program Guide in the Main Page. Then, EPG box will be displayed.
Timer You can adjust the real time as well as you can program the timer with various ways. This function is one of the strong point of DSR. Time Adjust Usually you get the information of real time from the satellite automatically but sometimes they emit wrong information. In that case, you can adjust the real time at this function. Time Reservation To activate the “Turn on time ” and/or“Turn Off the time” as well as recording time. It enables to select timer maximum 10.
Antenna Direction Help Although you entered correct value in Antenna Set up menu, if your antenna is positioned incorrectly, you could not receive signal from the Satellite. So DSR provides Antenna Positioning Help in order for you to have exact information to direct your antenna toward a satellite. First, select your desired Satellite name and then the location of selected satellite will be displayed. In case the location of the satellite is changed, you should re -set the new location.
Front Panel Display Front Panel Display : Up load Procedure : VCR Mode : Down load Procedure : System Waiting : Error in Data transmitting : Flash ROM Error : TV Mode : System Booting -42-
Trouble Shooting Problem The display on the front panel Possible causes Main cable is not connected. does not light up. No sound or picture, but the front panel shows red light. No sound or picture. Check that the main cable is plugged into the power socket. The DSR is in standby Press the standby button. mode. The satellite dish is not pointing at the satellite. No signal or weak signal. Bad picture / blocking error. What to do The satellite dish is not Adjust the dish.
Trouble Shooting Problem No Welcome Menu on the screen after you switched on the DSR for the first time. Possible causes The system is connected by SCART leads and TV is not in AV/EXT mode. If the system is connected by SCART leads, switch the TV to the appropriate AV input. The system is connected by Check the UHF channel fixed in your system and tune the UHF channel properly.. RF leads. There is interface on your digital satellite channels, an existing terrestrial channel or video signal.
System Specification 1) TV System : PAL B/G, I, D/K 2) Input Data Rate : 2- 45 MBPS 3) Modulation : QPS K(DVB S pec ific ation) 4) Inner FEC : Viterbi C onvolutional C oding Rate 1/2, 2/3, 3/4, 5/6.