User's Manual

ManualsBrandsDigital Gallery Global ManualsClock RadiosBluetooth Clock Radio

Table Of Contents

Thank you for your purchase of this quality clock. The utmost care has gone into the design and manufacture of your

clock. Please read these instructions and store them in a safe place for future reference.

FEATURES

1. PM indicator

2. Alarm 1 indicator

3. Bluetooth indicator

4. Alarm 2 indicator

5. USB charging port

6. DC5V jack

7.VOLUME - / ALARM 2 button

8. VOLUME + / ALARM 1 button

9. POWER ON/OFF / ALARM OFF / MODE button

10. HOUR / TUNING < button

11. MINUTE / TUNING > button

12. TIME / MEMORY / button

13. SNOOZE / SLEEP button

CONNECTING TO THE POWER SUPPLY

Insert the AC adaptor into a 120V AC ~ 60Hz mains outlet and the other end of the cord into the DC 5V jack on the

back of the unit.

INSTALLING THE CLOCK & ALARM BACK UP BATTERIES

The clock time and alarm (if set) can be maintained during a power failure by 2 x AAA/ LR03 batteries (not supplied).

Once the power is restored, check the time to make sure it is accurate and re-set if necessary.

INSERTING THE BATTERIES

1. Open the battery compartment at the bottom of the unit by pressing on the catch and removing the cover.

2. Insert 2 x AAA/ LR03 batteries (preferably alkaline batteries) into the battery compartment, following the polarity

as shown on the diagram inside the compartment.

3. Replace the battery compartment cover.

SETTING THE CLOCK AND ALARM

1. Press and hold the TIME button and the hour/minute digits will flash.

2. Use the HOUR button to set the hours. The PM indicator will light when the hour is advanced into the PM time.

3. Use the MINUTE button to set the minutes.

4. Press the TIME button to confirm.

Setting the alarm

1. To set the alarm time, follow steps (1) to (4) above, using the ALARM 1/2 button, instead of the TIME button.

2. Use the ALARM 1/2 button to select buzzer or radio

USING THE ALARM FUNCTION

1. To enable the alarm function, use the ALARM 1/2 buttons to select buzzer or radio. The selected alarm mode

indicator will light up.

2. The buzzer or radio will come on at the set time.

3. To stop the alarm, press the button. The alarm will sound again the next day.

Note: While the buzzer alarm volume is fixed and cannot be adjusted, the radio alarm volume can be adjusted to your

desired level using the VOLUME buttons. To select a radio station to wake up to, see the section on “USING THE

RADIO”.

SNOOZE FUNCTION

When the alarm sounds, press the SNOOZE button. The alarm mode indicator will flash and the alarm will sound again

after 9 minutes. To cancel the SNOOZE function and repeat the alarm the next day, press the button.

SLEEP FUNCTION

With this function, you can listen to the radio for up to 120 minutes, after which it will turn off automatically.

1. When the unit is switched on, press the SLEEP button repeatedly to select the duration: 120, 90, 60, 45, 30, 15, 05

minutes or OFF.

2. At the end of the set time, the radio turns off automatically.

3. To cancel the sleep function before the end of the set time, press the button to turn off the radio immediately.

INSTRUCTIONS & WARRANTY

Model# SXE86002

Summary of content (2 pages)

PAGE 1
INSTRUCTIONS & WARRANTY Model# SXE86002 Thank you for your purchase of this quality clock. The utmost care has gone into the design and manufacture of your clock. Please read these instructions and store them in a safe place for future reference. FEATURES 1. PM indicator 2. Alarm 1 indicator 3. Bluetooth indicator 4. Alarm 2 indicator 5. USB charging port 6. DC5V jack 7.VOLUME - / ALARM 2 button 8. VOLUME + / ALARM 1 button 9. POWER ON/OFF / ALARM OFF / MODE button 10. HOUR / TUNING < button 11.
PAGE 2
USING THE RADIO 1. Press the button to turn on the radio and press the MODE button and select FM mode. 2. Press and hold one of the buttons to start automatic tuning up/down. Release the button when the unit is receiving a station you would like to listen to. For manual fine-tuning, you can press it briefly to adjust the frequency step by step. 3. Press and hold the button to turn off the radio. For optimum reception Extend and position the FM antenna to achieve optimum reception.