7900AP series Wireless Indoor AP Installation Manual
7900AP series Wireless Indoor AP Installation Manual Content Content Chapter 1 Device Introduction ............................................. 1-1 Chapter 2 Preparation for Installation ................................. 2-1 2.1 Installation Precautions .................................................................2-1 2.2 Installation Environment Requirements .......................................2-1 2.3 Equipment Accessories .................................................................2-1 2.
7900AP series Wireless Indoor AP Installation Manual Chapter 1 Device Introduction Chapter 1 Device Introduction 7900AP series plastic indoor wireless AP includes 7942AP(R5) and 7962AP(R5), they adopts the built-in antenna. The figures are as below: Fig 1-1 7942AP(R5) Fig 1-2 7962AP(R5) The basic configuration of 7900AP series indoor AP is as below: Table 1-1 basic configuration Product Model 7942AP(R5) Applicable Protocols and Features • IEEE802.
7900AP series Wireless Indoor AP Installation Manual 7962AP(R5) Chapter 1 Device Introduction • IEEE802.11a/b/g/n Built-in antenna: 16W • Double Radiofrequency • 2.4G gain 4dBi • 5G gain 5dBi The shape size and weight of 7900AP series indoor AP is as below: Table 1-2 the shape size and weight Shape Size Weight Product Model 7942AP(R5)(W×D×H) 250×222×58mm 0.60kg 7962AP(R5)(W×D×H) 250×222×58mm 0.
7900AP series Wireless Indoor AP Installation Manual Chapter 2 Preparation for Installation Chapter 2 Preparation for Installation 2.1 Installation Precautions Only allow the professionals installing and disassembling the device and its annex. Before the installation and configuration, please read the related security introduction carefully. Adopt the appropriate security measures to avoid the personal injury and equipment damage.
7900AP series Wireless Indoor AP Installation Manual Chapter 2 Preparation for Installation 2.4 Installation Tools When installing 7900AP series indoor AP, the following tools may be used (user-owned).
900AP series Wireless Indoor AP Installation Manual Chapter 3 AP Installation Chapter 3 AP Installation Because the installation position of 7900AP series indoor AP is high normally, the maintenance personal cannot maintain and debug through the console port to login the device after installation. We suggest user conducting the basic configuration according to need before installing the AP to the appointed position. 3.
7900AP series Wireless Indoor AP Installation Manual Chapter 3 AP Installation 3.2 Checking before Installation Please check the following items before the AP installation: Please power to the AP first and connect the AP to the Ethernet, then check the LED status to make sure the AP can work normally. Please ensure to complete the wiring in the position of AP installation. 7900AP series indoor AP supports 802.3af and 802.3at standard PoE (Power over Ethernet) power.
7900AP series Wireless Indoor AP Installation Manual Chapter 3 AP Installation 3.4.1 Wall Hanging Installation If install the AP on the wall, use the wall mounting bracket and the supporting expansion bolts and screws. Fig 3-2 Wall mounting bracket size and block diagram (unit: mm) When installed with wall hanging method, please connect the Ethernet cable to the AP first and then install the AP on the wall mounting bracket.
7900AP series Wireless Indoor AP Installation Manual Chapter 3 AP Installation Fig 3-3 Install the wall mounting bracket to the wall 1: expansion screws 3: pegs 2: wall mounting kit 4: expansion bolts (2) Correspond the mounting holes on the back of AP to the position of the pegs on the wall mounting kit, showing as below: 3-4
7900AP series Wireless Indoor AP Installation Manual Chapter 3 AP Installation Fig 3-4 AP back mounting holes 1: anti-loose hook 3: peg mounting hole 2: wall mounting hole 4: pegs (3) Hang the AP onto the pegs of the wall mounting kit (4) Make the AP slide according to the direction as the following picture until the pegs slides to the bottom of the holes Fig 3-5 Hang the AP to the wall mounting bracket 3.4.2 T-keel Installation 1. The width of T-keel is from 12mm to 30mm. 2.
7900AP series Wireless Indoor AP Installation Manual Chapter 3 AP Installation Fig 3-6 T-keel installation 1: T-keel mounting kit 2: wall mounting kit 4: stationary blank of the chassis 3: M3×8 fastening crews 5: M3 screws T-keel ceiling installation steps are as below: (1) Set the T-keel mounting kit into the rail of the wall mounting kit and make the M3x8 fastening screws pass through the rail hole of the T-keel mounting kit to lock the T-keel mounting kit.
7900AP series Wireless Indoor AP Installation Manual Chapter 3 AP Installation Fig 3-8 Make T-keel stuck to the hanging slot of the wall mounting kit 1: wall mounting kit (3) Slide the T-keel mounting kit according to the direction in the following picture until to close to the T-keel, and then wring the M3x8 screws until the T-keel mounting kit is locked firmly.
7900AP series Wireless Indoor AP Installation Manual Chapter 3 AP Installation (7) Connect AP to the wired LAN by using the cable. 3.5 Connect AP Power 7900AP series indoor AP support the local power and PoE power. User can choose the method according to the actual network environment. 7942AP (R5) adopts the 802.3af/802.3at PoE power supply. 7962AP (R5) adopts the 802.3at PoE power supply. 3.5.
7900AP series Wireless Indoor AP Installation Manual Chapter 3 AP Installation power adapter output +12V 2A 7900AP series indoor AP supports the AC/DC power adapter. User can connect the power interface of the device to the local power through the power adapter, and then it can achieve the local power supply. 3.5.4 Checking after Power Check if the LED of AP works normally after connecting the power. The explanation of LED status is seen in the product spec. 3.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
For a Class A digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.