User's Manual

ManualsBrandsDigital Antenna ManualsElectronicsDual Band Bi-Directional Booster

INSTALLATION AND OPERATION MANUAL

1. Package Contents…………………………………………………………………….. 2

2. Important Safety Information………………………………………………………… 2

a. Limited Warranty………………………………………………………. 3

b. Limitation on Liability………………………………………………….. 3

c. FCC Regulations………………………………………………………… 3

3. Pre-installation Guidelines……………………………………………………………. 3

a. Installation Tools…………………………………………………...…… 3

b. Installation Procedure………………………………………………..…. 4

c. Electrical Power……………………………………………………….... 5

d. Amplifier/Repeater Status………………………………………………. 5

e. In-building Coverage Problems…………………………………………. 6

f. Coaxial Cable Recommendations……………………………………….. 7

4. Home/Office Installation………………………………………………………...…… 8

5. Marine Installation………………………………………………………………..….. 9

6. RV Installation………………………………………………………………………. 10

7. Electrical Specifications…………………………………………………………….. 11

8. Antenna & Accessory Options……………………………………………………… 12

9. Technical Support…………………………………………………………………… 13

Summary of content (13 pages)

PAGE 1
INSTALLATION AND OPERATION MANUAL 1. Package Contents…………………………………………………………………….. 2 2. Important Safety Information………………………………………………………… 2 a. Limited Warranty………………………………………………………. 3 b. Limitation on Liability………………………………………………….. 3 c. FCC Regulations………………………………………………………… 3 3. Pre-installation Guidelines……………………………………………………………. 3 a. Installation Tools…………………………………………………...…… 3 b. Installation Procedure………………………………………………..…. 4 c. Electrical Power……………………………………………………….... 5 d.
PAGE 2
IMPORTANT Read instructions completely before attempting install! 1.
PAGE 3
a. LIMITED WARRANTY Digital Antenna, Inc. warrants marine antennas for five (5) years and cellular antennas and amplifiers for one (1) year that its Products sold hereunder will at the time of shipment be free from defects in material and workmanship and will conform to Digital Antenna’s applicable specifications or, if appropriate, to Customer’s specifications previously accepted by Digital Antenna in writing.
PAGE 4
b. INSTALLATION PROCEDURE Description of DA4000SBR System The DA4000SBR Dual Band Wireless Amplifier/Repeater system provides cellular signal coverage to areas that have low signal strength to adequately operate a cellular phone. In these poor coverage areas it becomes difficult to place or receive calls and usually results in a dropped call. The DA4000SBR dual band amplifier/repeater system provides increased reception indoors by filtering, re-directing and amplifying the available signal.
PAGE 5
Pre-installation Considerations Establish a site installation plan based upon desired central coverage area • The inside and outside antenna must have a separation distance of 20 feet or greater, the outside antenna must be outside and separated from the inside antenna by an exterior wall, and both antennas must be in a vertical position. • Identify the outside antenna location.
PAGE 6
Green light – shows normal Status and DA4000SBR is operating normally. No corrective action necessary. Green/yellow/orange flickering light - shows that cellular activity is being transmitted through the DA4000SBR unit. The light will remain green with low levels of cellular transmission and change to flickering yellow/orange as transmission increases. The light may remain green with low levels of transmission. Solid Red light – indicates a fault.
PAGE 7
• Cabling – examine coaxial cable run and verify that the cable is not kinked, coiled or damaged. Re-locate cable to avoid kinks or coils. If supplied 30’ cable is damaged contact your dealer. The serial number on the DA4000SBR unit must be available. f. COAXIAL CABLE RECOMMENDATIONS The DA4000SBR system includes 30’ of Digital Antenna’s PowerMaxTM ULTRA low loss cable and connectors for easy installation.
PAGE 8
4. Home/Office Installation Review pre-installation considerations and determine site installation plan. 1. Install supplied outside antenna (P/N 288-PB) to vertical surface or pole with supplied hardware. Mount the outside antenna clear of metal objects and obstructions. Outside antenna must be mounted in a vertical position. WARNING! Only Digital Antenna authorized products may be used with the DA4000SBR system.
PAGE 9
5. Marine Installation Review pre-installation considerations and determine site installation plan. 1. Install supplied outside antenna (P/N 288-PB) to vertical surface or pole with supplied hardware. Mount the outside antenna clear of metal objects and obstructions and as high as possible. Outside antenna must be mounted in a vertical position. The DA4000SBR system may also be used with one of Digital Antenna’s marine 9dB gain dual band cellular antennas.
PAGE 10
6. RV Installation Review pre-installation considerations and determine site installation plan. 1. Install supplied outside antenna (P/N 288-PB) to vertical surface or pole with supplied hardware. Outside antenna must be mounted in a vertical position. Mount the outside antenna clear of metal objects and obstructions and as high as possible but take care not to exceed height of other roof mounted items such as A/C. WARNING! Only Digital Antenna authorized products may be used with the DA4000SBR system.
PAGE 11
7. Specifications Amplifier/Repeater Unit P/N DA4000SBR • Frequency: Uplink: 824-849 MHz and 1850-1910 MHz Downlink: 869-895 MHz and 1930-1990 MHz • Modulations: AMPS/GPRS/TDMA/PCS/CDMA/GSM850/GSM1900 • Max Output Power does not exceed legal limit of: 3W (824-849 MHz), 2W (1850-1910 MHz) • Dynamic Variable Gain: 60dB Max • Impedance: 50 ohms • Noise Figure: < 10dB • Power Consumption: Standby 5 vdc/0.5A, Uplink 5 vdc/2A Max.
PAGE 12
Cable • • • • • P/N C277-30 Length: 30’ (9.14m) Impedance: 50 Ohm RF connectors: N male and mini-UHF male factory attached Attenuation at 800 MHz: 4.5 dB per 30’ Attenuation at 1900 MHz: 7.5 dB per 30’ Power Supply P/N DP255 • Input: 100-240VAC 50/60 Hz • Output: 5VDC 1.5A • Mounting: Wall type • Cord Length: 10’ (3m) • Output plug: 5.5 x 2.5 x 11mm Power Cable P/N DP515 • Input: +/- 9VDC to +/- 24 VDC • Output: 5VDC 1.
PAGE 13
2-way Cellular Combiner w/ mini-UHF female connectors Dash/wall mount adapter cable 5’ length DA-2100 C428-05 Digital Antenna manufacturers cellular amplifiers, repeaters and antennas for the best communication on land or sea. All products are designed, engineered and manufactured by Digital Antenna in the USA. Visit www.DigitalAntenna.com to view our complete product line. 9. Technical Support Locate the Digital Antenna Inc. serial number on the DA4000SBR unit before calling.