860-00222-00 Rev A April 2015 Operation Guide Compact HD Law Enforcement In-Car Video System Copyright © 2015 Digital Ally, Inc. All Rights Reserved. This publication may not be reproduced, stored in a retrieval system, or transmitted in whole or part in any form or by any means electronic, mechanical, recording, photocopying, or in any other manner without the prior written approval of Digital Ally, Inc.
MicroVu HD™ Operation Guide 860-00222-00 Rev A Table of Contents SECTION - 1 INTRODUCTION ............................................................................................................................1-1 MICROVU HD™ FEATURES .................................................................................................................................1-1 SOFTWARE UPDATES .........................................................................................................................
MicroVu HD™ Operation Guide 860-00222-00 Rev A Playback Controls ........................................................................................................................................5-8 Playback Slider bar ......................................................................................................................................5-9 View Selection and Options ........................................................................................................................
MicroVu HD™ Operation Guide 860-00222-00 Rev A Section - 1 Introduction The MicroVu HD is an extremely compact law enforcement in-car digital video event recording system. MicroVu HD provides up to1080p High-Definition video recording and a powerful array of features to capture video and audio evidence while also collecting useful information such as a date/time stamp, location, and more.
MicroVu HD™ Operation Guide 860-00222-00 Rev A Standard Parts List Part Number 001-00720-00 Part Number Description 050-10179-00 MicroVu HD Main Recorder w/Mounting Kit 002-05095-00 DWM-800 System, Includes Wireless Microphone, Charging Cradle, Mounting Bracket, and Lapel Microphone.
MicroVu HD™ Operation Guide 860-00222-00 Rev A Section - 2 Device Configuration – VuVault The MicroVU HD contains a default configuration and can be used immediately. For full functionality it must be reconfigured by activating the device using Digital Ally’s VuVault™ back-office software.
MicroVu HD™ Operation Guide 860-00222-00 Rev A MicroVu HD Settings - General Digital Ally, Inc.
MicroVu HD™ Operation Guide 860-00222-00 Rev A Location Below are the configuration items for localization which are provided to address Date/Time settings and display formats. Local Time Zone The local time zone is used to adjust the device when synchronizing to the Greenwich Mean Time. During device configuration, the local time from the PC real time clock will be used, and Central Standard Time is set by default. The date and time is set by the factory prior to shipment.
MicroVu HD™ Operation Guide 860-00222-00 Rev A During the Ignition Shutdown Time: 1. If configured to 0 minutes; the Ignition Shutdown Timer is disabled, and the system will follow the operation for the Sleep Mode Timer configuration. 2. With Ignition Shutdown Timer enabled, and the system is not recording, all LED Indicators will turn off, but MicroVu HD will remain fully powered until the Timer expires.
MicroVu HD™ Operation Guide 860-00222-00 Rev A If the MicroVu HD is not recording when vehicle power is completely lost, the MicroVu HD automatically make a 60 second recording using the internal backup battery, then power down completely. Recording Details Audio Mode The Audio Mode determines how audio will be recorded to your device. Disabled: No audio will be recorded. Enabled (w/o Pre-Event): Audio is recorded during the event but not recorded during pre-event.
MicroVu HD™ Operation Guide 860-00222-00 Rev A video so it can be recorded during a record event. If set for 0 seconds, preevent function will be disabled. Settings: 0, 6, 12, 18, 24, 30, 60 seconds [default = 0 seconds] In-Car Microphone Enables the MicroVu HD to record from the In-Car Microphone. Settings: Yes [default], No Backseat Microphone Enables the MicroVu HD to record from the Backseat Microphone.
MicroVu HD™ Operation Guide 860-00222-00 Rev A Vehicle Speed Limit This parameter sets the threshold for excessive speed. When the Vehicle Speed Trigger Source is enabled and the speed exceeds the value of this parameter, an Event Record will be triggered. Settings: 1-199 mph [default = 75] Sensors Input Sensors The MicroVu HD main cable allows external connection to the vehicle triggers.
MicroVu HD™ Operation Guide 860-00222-00 Rev A GPS Locations If a Home Base Location has been configured, the MicroVu HD will begin recording when the defined distance from home base has been exceeded. Once the duration of the event ends, subsequent record events will be triggered as long as the vehicle remains outside the home base radius. The coordinates can be manually entered, or use the “Edit with Map” button to use Google Maps to easily create the home base radius.
MicroVu HD™ Operation Guide 860-00222-00 Rev A Enter the location(s) latitude in an integer decimal format (i.e.; 38.89171). To disable a location, the latitude, longitude, and radius parameters must all be zero. Longitude Enter the location(s) longitude in an integer decimal format (i.e.; -94.670956). To disable a location, the latitude, longitude, and radius parameters must all be zero. Radius (miles) Enter the radius of the unauthorized location in miles.
MicroVu HD™ Operation Guide 860-00222-00 Rev A 4. Select the drive letter assigned to the MicroVu HD or SD Card. 5. Note the Card Volume Name field. If there is a current volume name, it will show up automatically. If not, it will default to the serial number of the MicroVu HD. This can be changed according to customer preference to whatever is deemed most appropriate. 6.
MicroVu HD™ Operation Guide 860-00222-00 Rev A 2. Open the Digital Ally WTM Server Status Monitor software (Start Menu > Programs > Digital Ally > WTM Status Monitor). 3. Click the Update Activation Files button. 4. Enter the VuVault User ID and Password, then click OK. 5. The ‘deviceconfig’ file will be automatically extracted from VuVault and wirelessly transferred to the MicroVu HD the next time it connects to the Wireless Access Point.
MicroVu HD™ Operation Guide 860-00222-00 Rev A 1 Audio Mute 2 Covert Button 3 Record Start / Mark / Record Stop 4 Status Indicator LED’s 5 Camera Lens 6 USB / microSD Card Access Panel 7 Secure Panel Lock System Status Indicator Operation Chart Red Powering ‘ON’ Blue Green Sequential flash Digital Ally, Inc.
MicroVu HD™ Operation Guide 860-00222-00 Rev A ON Standby (Ready to Record) Audio Recording Enabled ON (Event or Pre-event) RFID Log In Successful RFID Log Out Successful RFID Warning (Card Not Programmed) Fast Sequential Flash Ending with 3 GREEN Flashes Fast Sequential Flash Ending with 3 BLUE Flashes Fast Sequential Flash Ending with 3 RED Flashes All Indicators Off Covert Mode Recording in Progress WiFi Communication in Progress Acknowledgement Error ON ON ON Sequential flash Fast Double Flas
MicroVu HD™ Operation Guide 860-00222-00 Rev A Logging Out The User will remain logged in to the MicroVu HD until the same user logs out by swiping their card again. The MicroVu HD will confirm the logout by rapidly flashing all 3 LEDs in sequence, ending with 3 Blue flashes. The user will be automatically Logged Out when the vehicle ignition is turned off.
MicroVu HD™ Operation Guide 860-00222-00 Rev A HD will automatically delete the files from its memory. The driver-facing LED indicators will flash in sequence while the MicroVu HD is actively transferring video files to your computer. A VuVault Wireless Server must be configured to use the wireless transfer feature (see Method A: Wireless Server Installation in the “VuVault Wireless Server Setup Guide” for setup instructions).
MicroVu HD™ Operation Guide 860-00222-00 Rev A 3. Once the files have been verified, the system will automatically list and select all of the files for upload. If you don’t wish to upload all available records, uncheck the Select All checkbox and then check the box next to each record you want to upload. The default File Server and Share Location are displayed. If additional file servers have been defined, select the desired destination using the dropdown menu.
MicroVu HD™ Operation Guide 860-00222-00 Rev A Do not remove the microSD Card while the MicroVu HD is recording. This will result in corrupted, unusable video files. Please consult the VuVault User’s Guide for upload instructions. If the MicroVu HD is powered on, All 3 LED’s will flash rapidly when the microSD Card is removed. Uploading Files directly to a Computer using a USB Cable Using the supplied USB cable, connect your MicroVu HD to a computer using the USB port behind the access panel.
MicroVu HD™ Operation Guide 860-00222-00 Rev A Media Details Playback Controls Toolbar Controls Browse Media: Browse and select event files (.mtd) to playback. Save Media: Save changes or segment a video event. Segmenting the video allows you to create a new video without altering the original video. Media Details: Displays the details of the media file and allows adding additional information. Edit Marks: Add/Edit Marks or Notes to the video event. Image Capture: Save a snapshot of a frame of video.
MicroVu HD™ Operation Guide 860-00222-00 Rev A Playback Slider bar The Playback Slider bar allows you to move forward or backward in the video event very quickly by dragging the slider. Beginning of Video Flag: The Green Flag indicates the Beginning of the video event. Start of Recording Flag: The Black Flag indicates the Start of video recording and any added Marks. End of Video Flag: The Red Flag indicates the End of the video event.
MicroVu HD™ Operation Guide 860-00222-00 Rev A Section - 6 Support & Troubleshooting Firmware Updates Log on to www.digitalallyinc.com/tech-support.php and register for an Account to be an Authorized User. By registering you will be able to download all the latest firmware/software updates and will be notified of future updates. Firmware Update Instructions The MicroVu HD requires a specific filename to perform a firmware update. The filename for the MicroVu HD firmware is ‘firmware.r’.
MicroVu HD™ Operation Guide 860-00222-00 Rev A 10. Click the Update Activation Files button. 11. The firmware file will be wirelessly transferred to the MicroVu HD the next time it connects to the wireless access point. The new firmware will automatically install without the need to reboot the MicroVu HD. SD Card Maintenance It is recommended that the microSD Cards be periodically defragmented or formatted.
MicroVu HD™ Operation Guide 860-00222-00 Rev A Section - 7 Warranty Information STANDARD LIMITED WARRANTY MicroVu HD Compact HD Law Enforcement In-Car Video System We warranty that our Compact HD Video System, Model MicroVu HD, will be free from defects in workmanship and material for a period of 24 months from the date of purchase by the original purchaser.
MicroVu HD™ Operation Guide 860-00222-00 Rev A Section - 8 Contact Information 9705 Loiret Blvd Lenexa, KS 66219 Website: www.digitalallyinc.com Support E-Mail: support@digitalallyinc.com Sales E-Mail: sales@digitalallyinc.
MicroVu HD™ Operation Guide 860-00222-00 Rev A Section - 9 Regulatory This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.