User's Manual

ManualsBrandsdigiO2 International ManualsElectronicsCare Pal dongle

I/O port

USB 2.0

Storage capacity

32 MB for 30-day data storage

Bluetooth

4.0 class 2

LED indicators

Rating

5Vdc, 100mA

Supported OS

Operation Environment

Storage Environment

Windows® 8, Windows® 7, Windows® XP

10~40C (50~104F), 10% to 95% RH

-20~50C (-4~122F), 5% to 95% RH (Non-condensing)

Care Pal Dongle

Thank you for purchasing an digiO2 product!

The Care Pal dongle is a Bluetooth dongle that integrates data from

compatible Bluetooth-enabled sphygmometers, electrocardiograms,

pulse oximeters, blood glucose meters, weighing scales, and

thermometers.

Using the Care Pal dongle, data from these compatible medical devices

may be sent to a paired PC via wireless and secured transfers.

dongle cover

USB connector

Network LED

Bluetooth LED

Installing the Care Pal dongle software

IMPORTANT! Ensure that your system runs .Net Framework 3.5 before

installing the

Care Pal dongle software. You may download this version via

www.microsoft.com/en-us/download/details.aspx?id=21#overview

1. Turn on your computer or laptop then connect the

Care Pal

dongle to a USB 2.0 port.

2. Under My Computer, open the

Care Pal

dongle’s storage drive

then select eHealthSetup.

3. Choose Yes in the succeeding window to begin the installation

process.

LED status indicators

Network LED

Color Status

Blue Network is online.

Orange

Bluetooth LED

Color

Status

Blue

Bluetooth is enabled.

Orange

Bluetooth is disabled.

Summary of content (6 pages)

PAGE 1
LED status indicators Care Pal Dongle Thank you for purchasing an digiO2 product! The Care Pal dongle is a Bluetooth dongle that integrates data from compatible Bluetooth-enabled sphygmometers, electrocardiograms, pulse oximeters, blood glucose meters, weighing scales, and thermometers. Network LED Bluetooth LED Color Status Color Status Blue Network is online. Blue Bluetooth is enabled.
PAGE 2
Using your Care Pal dongle 1. Turn on your laptop or computer. 2. Insert the Care Pal dongle in an available USB 2.0 port on your laptop or computer. 3. Turn on the bluetooth device you would like to pair with your Care Pal dongle. Troubleshooting Problems Cause Suggested Actions LED display does not light up No power Make sure that your PC is powered on. Network LED display turns Orange Network is offline Check your PC network is workable.
PAGE 3
Cleaning Instructions • Wipe with a dry cloth Disposing of your old product Within the European Union EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste. This includes monitors and electrical accessories, such as signal cables or power cords.
PAGE 4
Guidance and manufacturer’s declaration – electromagnetic emissions The model CPW-103 is intended for use in the electromagnetic environment specified below. The customer or the user of the model CPW-103 should assure that it is used in such an environment. Emissions test Compliance Electromagnetic environment – guidance RF emissions Group 1 The model CPW-103 uses RF energy only for its internal function.
PAGE 5
a survey, should be less than the compliance level in each frequency range. b Interference may occur in the vicinity of equipment marked with the following symbol: NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies. NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.
PAGE 6
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver.