PR O DU CT GUI DE Mini/Standard/Hybrid Touch-Free RFID | Basic & Advanced SHARED & ASSIGNED USE FUNCTIONALITY Versa locks with a touch-free activation RFID interface are operated by a RFID Credential or an ADA compliant User Key. Manager Keys provide management access and external power. Programming is accomplished via a Programming Key unique to the lock system. For Advanced Models of Versa, an optional mobile application tool is available to simplify lock system management and provide audit trail.
PR O DU CT GUI DE Mini/Standard/Hybrid Touch-Free RFID | Basic & Advanced LOCK ORIENTATION Hybrid Front Unit Horizontal with Knob on Left Reader LED Usage Indicator Shared Use Key Slot Assigned Use Knob ADA Handle Vertical with Knob on Bottom Vertical with Knob on Top Horizontal with Knob on Right RFID Credentials RFID Card RFID Adhesive Label RFID Keyfob RFID Wristband KEYS User Key Operates the lock Overrides user access Allows management inspection Provides external power* Programs Manag
PR O DU CT GUI DE Mini/Standard/Hybrid Touch-Free RFID | Basic & Advanced KEY INSERTION Refer to the above images for proper key insertion. SETUP Locks are shipped with factory default settings (only operates by presenting hand to lock). Each lock must be set up to operate with a Programming Key and Manager Credentials (Manager Key or Manager RFID Credential). 1 2 Ma na ge r or Insert the Programming Key. A two-tone beep will be heard and the LED will turn on. 3 Insert the Programming Key.
PR O DU CT GUI DE Mini/Standard/Hybrid Touch-Free RFID | Basic & Advanced PROGRAMMING INSTRUCTIONS Express Register Manager Credentials The Programming Key can quickly program multiple locks to operate with the same manager credentials. 2 1 Go to a lock already programmed to operate with the manager credentials. Insert and hold Programming Key in place for 10 seconds (a twotone beep will be heard after 5 seconds followed by a second set of two-tone beeps after 10 seconds). The LED will turn on.
PR O DU CT GUI DE Mini/Standard/Hybrid Touch-Free RFID | Basic & Advanced PROGRAMMING INSTRUCTIONS Replace Programming Key or Manager Credentials The locks must be reprogrammed to prevent the lost/stolen Programming Key or manager credentials from operating a lock. To Replace the Programming Key 1 2 Note the order or serial number (found on the lock’s rear unit). Contact Digilock support to purchase a replacement Programming Key.
PR O DU CT GUI DE Mini/Standard/Hybrid Touch-Free RFID | Basic & Advanced PROGRAMMING INSTRUCTIONS - IN ASSIGNED USE FUNCTIONALITY Assign User Credentials Up to 20 user credentials (User Key or RFID Credential) may be assigned to each lock. 1 2 3 4 or Present hand to wake up the lock. Insert a valid Manager Key for 5 seconds. Two sets of twotone beeps will be heard. Remove the Manager Key. The LED will turn on. Insert each User Key or present each User RFID Credential one at a time.
PR O DU CT GUI DE Mini/Standard/Hybrid Touch-Free RFID | Basic & Advanced PROGRAMMING INSTRUCTIONS - IN ASSIGNED USE FUNCTIONALITY Remove User Credentials (for assigned use functionality only) Make sure the lock is in assigned use functionality (a green LED will flash when presenting hand to lock). The locks must be reprogrammed to remove user credentials from operating a lock. 1 Collect all remaining and replacement user credentials 2a 2b Present hand to wake up the lock.
PR O DU CT GUI DE Mini/Standard/Hybrid Touch-Free RFID | Basic & Advanced OPERATING INSTRUCTIONS - IN SHARED USE FUNCTIONALITY In shared use functionality, the user presents any User RFID Credential or inserts any User Key to lock and uses the same User RFID Credential or User Key to unlock. Once unlocked, the lock is available for a different user. Operate with a User RFID Credential 1a 2b 2a 1b Lock: Close the door. Present any User RFID Credential, then turn the knob to the locked position.
PR O DU CT GUI DE Mini/Standard/Hybrid Touch-Free RFID | Basic & Advanced OPERATING INSTRUCTIONS - IN SHARED USE FUNCTIONALITY Operate with a Programming Key 1a 1b 2a Lock: Close the door. Present hand to lock until a single beep is heard, then insert the programming key. Turn knob to the locked position. 2b Unlock: Present hand to lock until a single beep is heard, then insert the programming key. Turn knob to the unlocked position. Open the door.
PR O DU CT GUI DE Mini/Standard/Hybrid Touch-Free RFID | Basic & Advanced OPERATING INSTRUCTIONS - IN ASSIGNED USE FUNCTIONALITY Operate with a Manager Credential 1b 1a Ma na 2 ge r or Unlock: Insert a valid Manager Key or present a valid Manager RFID Credential then turn the knob to the unlocked position. Open the door.** Relock: Close the door then turn the knob to the locked position.
PR O DU CT GUI DE Mini/Standard/Hybrid Touch-Free RFID | Basic & Advanced SUPPORT Low Battery Indicator After locking or unlocking, the lock emits two sets of three beeps indicating that the batteries are low. Replace the batteries. Does Not Unlock with the User RFID Credential or User Key The lock does not recognize the User RFID Credential or User Key. For immediate access, operate with a valid Manager Credential.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
