Product Guide

ManualsBrandsDigilock ManualsElectronicsCabinet Lock

PRODUCT GUIDE

Touch-Free RFID

Smart Lock

LOCK PARTS

CREDENTIALS

LED Usage Indicator

Assigned Use

Aspire Touch-Free RFID Smart Locks are operated by RFID Credential or by Mobile ID. The Digilink network application simplies lock

management, and admin and manager credentials allow for management access.

User RFID Credential

& Mobile ID

Admin/Manager

Credentials

Network

App

Power

Jumper Key

Operates the lock • • •

Overrides user access • •

Allows management inspection • •

Remotely unlocks from any location •

Programs admin and manager credentials to the lock •

Assigns user credentials (in assigned use functionality) •

Provides external power •

Front Unit

Standard Vertical

Key Slot

Reader

Deadlatch Rear Unit

Cover Plate

Lock Mounting

Holes

½" (12.7 mm)

Deadlatch

Cover Plate Screw

Pull Handle

Connection Options

Cable

An unlimited amount of user credentials may be assigned to each lock.

An unlimited amount of admin and manager credentials may be programmed to operate locks.

ASSIGNED USE FUNCTIONALITY

RFID Adhesive Label RFID Keyfob

RFID Wristband

RFID Card

RFID Credentials

Summary of content (4 pages)

PAGE 1
PR O DUCT GUI DE Touch-Free RFID | Smart Lock ASSIGNED USE FUNCTIONALITY Aspire Touch-Free RFID Smart Locks are operated by RFID Credential or by Mobile ID. The Digilink network application simplifies lock management, and admin and manager credentials allow for management access. LOCK PARTS Front Unit Deadlatch Rear Unit ½" (12.
PAGE 2
PR O DUCT GUI DE Touch Free RFID | Smart Lock OPERATING INSTRUCTIONS In assigned use functionality, users operate the lock with their assigned user credential(s) (either an RFID credential or Mobile ID credential). Operate with an Assigned Mobile ID Credential Operate with an Assigned RFID Credential 1a 2a 1b Unlock: Present an assigned RFID credential. Lock: Close the door. Unlock: Present an assigned Mobile ID credential. Lock: Close the door.
PAGE 3
PR O DUCT GUI DE Touch Free RFID | Smart Lock SUPPORT Error Condition Indicators 10 rapid beeps: The lock is binding which means that either door alignment or stored items are preventing the lock from operating. Press on the door while operating the lock. If error condition persists, contact Digilock support for assistance. 2 sets of three beeps: The batteries are low. Replace the batteries.
PAGE 4
PR O DUCT GUI DE Touch Free RFID | Smart Lock BATTERY REPLACEMENT It is not necessary to remove the lock from the door. In case of battery failure while the door is locked, operate with a Power Jumper key. CAUTION: Risk of explosion or leakage if battery is replaced by an incorrect type, mixed with a different battery type, or inserted backwards. Replace all batteries of a set at the same time. Be sure to insert batteries with correct polarities.