D i g i g r a m PCX881HR PCX882HR Professional Sound Cards User’s manual
D i g i g r a m For technical support, please contact your system supplier. Digigram S.A. Parc de Pré Milliet, 38330 Montbonnot - FRANCE Tel: +33 (0)4 76 52 55 01• Fax: +33 (0) 4 76 52 53 07• E-mail: info@digigram.com Digigram Inc. 2101 Wilson Boulevard, Suite 1004, Arlington, VA 22201-USA Tel: +1 703 875 9100 • Fax: +1 703 875 9161 • E-mail: input@digigram.com Digigram Asia Pte Ltd.
PCX881HR & PCX882HR User’s Manual Table of Contents INFORMATION FOR THE USER ....................................................................................................4 IMPORTANT NOTICE...............................................................................................................................5 CONTENTS OF THIS PACKAGE ....................................................................................................5 FEATURES ...................................................
D i g i g r a m INFORMATION FOR THE USER This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a CLASS B digital device, pursuant to Part 15 of the FCC Rules.
PCX881HR & PCX882HR User’s Manual IMPORTANT NOTICE This card has been tested and found to comply with the following standards: • • • International: CISPR22 Class B. Europe: EMC 89/336/CEE (1992) specifications. United States: FCC Rules-Part 15-Class B (digital device). In order to guarantee compliance with the above standards in an installation, the following must be done: • • the provided cable must not be modified. additional cables used must have their respective shield connected to each extremity.
D i g i g r a m PCX882HR main hardware features • • • • • All features of PCX881HR plus… 8 balanced analog mono line inputs, with software programmable analog and digital gain. 8 servo-balanced∗ analog mono line outputs, with software programmable analog and digital gain.
PCX881HR & PCX882HR User’s Manual Supported operating systems PCX881HR, and PCX882HR cards run under Windows 2000 and Windows XP. HARDWARE INSTALLATION The card has to be installed in the computer prior to installing its driver. Installing the card Gently plug the card into a free PCI slot and press it down to position it firmly. Tighten the screw. Interrupt and memory address Hardware interrupt and addresses are automatically set up at start-up by the PCI PnP BIOS.
D • • • • • • • • i g i g r a m The “License Agreement” window appears: read it, and click on Yes to approve it. Do the same for the “Read Me First” window. Choose the destination folder where Setup will install the application files (\pcxnp by default). Please note that driver files are installed in \windows\system32\Drivers\Digigram\PCXHR. Click on Next Check the “Driver for the HR board” check-box option. Select the program folder where the program icons will be added (default DIGIGRAM).
PCX881HR & PCX882HR User’s Manual If the card you have installed is listed: • • Right click on the icon of the card. Select Diagnostics, and Play sine. This plays in loop a sine wave signal on the outputs of the card. You can also select Play file to play in loop a file of your choice (PCM, MPEG layer 1 or layer 2). If the playback is correct, the card is correctly installed and works. To stop the playback, right click on the card icon, and select • Stop Activities.
D i g i g r a m SPECIFICATIONS CONFIGURATION PCX881HR Bus / format PCX882HR 64-bit/66 Mhz Universal PCI master mode Digital Signal Processor Motorola 56321 at 240 MHz RAM 512 kWords Size 175mm x 99 mm Power requirements (+3.3 V /+5 V / +12 V / -12 V) 0 A /0.6 A /0.1A /0 A 0 A /0.7 A /0.5A /0.
PCX881HR & PCX882HR User’s Manual AUDIO SPECIFICATIONS PCX881HR Sampling frequencies available PCX882HR Programmable from 8 to 192 kHz A/D and D/A converter resolution NA Supported audio formats 24 bits MPEG, PCM (8, 16, 24 bits) AUDIO PERFORMANCE PCX881HR PCX882HR Frequency response NA 20 Hz–20 kHz: ±0.2 dB Channel phase difference: 20 Hz / 20 kHz NA <0.
D i g i g r a m APPENDICES Analog Digital PCX881HR – Pinout 12 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Signal AES/EBU 2 AES/EBU 2 + AES/EBU SYNC AES/EBU SYNC + AES/EBU OUT 4 AES/EBU OUT 4 + AES/EBU OUT 2 AES/EBU OUT 2 + LTC IN NC NC NC NC NC NC NC NC NC NC NC NC Pin 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 Signal GND Vidéo IN GND AES/EBU IN 3 AES/EBU IN 3 + GND AES/EBU IN 4 AES/EBU IN 4 + GND NC NC GND NC NC GND NC NC GND NC NC GND Pin 43 44 45 46 47
PCX881HR & PCX882HR User’s Manual Analog Digital PCX882HR – Pinout Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Signal AES/EBU 2 AES/EBU 2 + AES/EBU SYNC AES/EBU SYNC + AES/EBU OUT 4 AES/EBU OUT 4 + AES/EBU OUT 2 AES/EBU OUT 2 + LTC IN OUT 8 OUT 8 + OUT 6 OUT 6 + OUT 4 OUT 4 + OUT 2 OUT 2 + IN 4 IN 4 + IN 2 IN 2 + Pin 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 Signal GND Vidéo IN GND AES/EBU IN 3 AES/EBU IN 3 + GND AES/EBU IN 4 AES/EBU IN 4 + GND IN 8 IN 8 + GND IN 7 I
