D i g i g r a m VX222e VX222e-Mic Professional Stereo Sound Cards User’s manual
D i g i g r a m For technical support, please contact your system supplier Digigram S.A. Parc de Pré Milliet, 38330 Montbonnot - FRANCE Tel: +33 (0)4 76 52 55 01• Fax: +33 (0) 4 76 52 53 07• E-mail: info@digigram.com Digigram Inc. 2000 North 14th Street - Suite 530, Arlington, VA 22201-USA Tel: +1 703 875 9100 • Fax: +1 703 875 9161 • E-mail: input@digigram.com Digigram Asia Pte Ltd.
VX222e & VX222e-Mic User’s Manual Table of Contents INFORMATION FOR THE USER ....................................................................... 5 IMPORTANT NOTICE ................................................................................................ 5 CONTENTS OF THIS PACKAGE ....................................................................... 6 FEATURES .............................................................................................................................
D i g i g r a m APPENDICES .................................................................................................................... 20 VX222e schematic diagram........................................................................................... 20 VX222e-Mic schematic diagram .................................................................................. 20 Layout.....................................................................................................................
VX222e & VX222e-Mic User’s Manual INFORMATION FOR THE USER This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a CLASS B digital device, pursuant to Part 15 of the FCC Rules.
D i g i g r a m CONTENTS OF THIS PACKAGE Thank you for purchasing a Digigram VX sound card. The package consists of the following components: • a VX222e or VX222e-Mic sound card • the User’s Manual at hand. The end user version additionally includes: • two breakout cables (analog and digital) • a CD-Rom with drivers, installation notices, FAQs, etc… • a registration form For the OEM version, the cables are available optionally.
VX222e & VX222e-Mic User’s Manual Additional hardware features VX222e-Mic • • • 1 analog microphone input with - high-quality preamplifier - switchable 48 V phantom power - analog expander/compressor/limiter This input is mixed with the two line inputs before A/D conversion.
D i g i g r a m HARDWARE REQUIREMENTS Minimum requirements PC with one free PCI EXPRESSTM (PCIe®) slot (x1, x2, x4, x8, x16 or x32). CPU power and memory required depend on the operating system and on the audio application used. Software requirements To use your VX222e or VX222e-Mic, install the driver from the HR Runtime package version 1.70 or higher.
VX222e & VX222e-Mic User’s Manual SOFTWARE INSTALLATION Note: the installation of the software requires administrator rights on your computer Please visit the Digigram web site at www.digigram.com for the most recent driver. In case you run a specific application developed or installed by a Digigram partner, it might require the use of a specific driver version. In this case, make sure that the updated driver has been approved by your supplier.
D i g i g r a m To do so, install the driver with the command line: “setup x_topology” (not available under Windows Vista). For detailed information, please refer to the dedicated document on our web site. • • • • • • • • • • • • ∗ Shut down your computer and insert your VX card. Restart your computer. Click on Cancel if the “Found New Hardware” Wizard appears. Double-click on the HR Runtime vxx.msi/HR Runtime vxx.msi for Vista icon to launch the driver installation.
VX222e & VX222e-Mic User’s Manual Parameterizing the ASIO and Wave drivers For all sound cards of the VX range, “PCM only” is the only operating mode, therefore this button is disabled in the Digigram control panel (CPL). (To access this control panel, go to , , , ). For detailed information on how to use the Digigram control panel, please refer to its online help (“? Help” button).
D i g i g r a m Removing the driver under Windows XP, and Windows Server 2003 • • • • Open the Windows Control Panel and double-click on the Add/Remove Software icon. Select Digigram HR Runtime …, and Change/Remove. Select Remove in the “HR Runtime” window. Follow the instructions to finish the driver removal. Removing the driver under Windows Vista • • • • Open the Windows Control Panel and double-click on the Programs and Features icon.
VX222e & VX222e-Mic User’s Manual • If the card you have installed is listed: • Right click on the icon of the card. • Select ‘Diagnostics’, and Play Sine. This plays in loop a sine signal on the outputs of the card. You can also select Play file to play in loop a file of your choice (PCM only). If the playback is correct, the card is correctly installed and works. • To stop the playback, right click on the card icon, and select Stop Activities.
D i g i g r a m The ‘Digigram Hardware Settings’ (‘DHS’) control panel Digigram hardware settings (DHS) is an application allowing to configure the hardware resources of Digigram cards for all audio applications using them. A resource being managed by the DHS application can not be modified by any other applications. To enable an audio application to modify a Digigram card resource, this resource must not be managed by the DHS.
VX222e & VX222e-Mic User’s Manual SPECIFICATIONS Configuration Bus/Format Digital Signal Processor RAM Size Power requirements (+3.3V/ +12V) Operating: temp / humidity (non-condensing) Storage: temp / humidity (non-condensing) VX222e VX222e-Mic PCI EXPRESSTM (PCIe®) x1 (x2, x4, x8, x16, x32 compatible) Motorola 56303 at 100 MHz 128 kWords 512 kWords 168 mm x 99 mm x 20 mm 1 A / 0.2 A 1.
D i g i g r a m Additional inputs VX222e-Mic Microphone input Digital input (stereo) Other inputs 1 professional mono with - high-quality preamplifier - switchable 48 V phantom power - analog expander/compressor/limiter This input is mixed with the two line inputs before A/D conversion.
VX222e & VX222e-Mic User’s Manual Audio specifications Sampling frequencies available A/D and D/A converter resolution Supported audio formats VX222e VX222e-Mic Programmable from 8 to 192 kHz 24 bits 24 bits PCM (8, 16, 24 bits), Float IEEE754 Analog audio performance Measurements done at Fs=48 kHz unless stated otherwise, with filter on the 22 Hz- 22 kHz range VX222e VX222e-Mic at 48 kHz: 20 Hz - 20 kHz: +0 /-0.3 dB Frequency response at 96 kHz: 20 Hz - 40 kHz: +0 /-0.
D i g i g r a m Analog mono microphone input features VX222e-Mic Power supply Programmable mic gain Maximum input level/impedance Equivalent Input Noise, A/D-D/A at 48kHz, G=60 dB Programmable noise-gate threshold Programmable compressor/limiter threshold Programmable compressor ratio Programmable compressor/limiter gain Limiter ratio Compressor/limiter release time Management of line and mic inputs switchable 48 V phantom power 0 to 66 dB in 0.
VX222e & VX222e-Mic User’s Manual Development environments Digigram management Other management Supported operating systems Main on-board processing features (with np SDK) VX222e-Mic VX222e np SDK (HR runtime, PCM only) Wave ∗ , ASIO, DirectSound (all PCM only) Windows XP∗∗, Windows Server 2003∗∗ , and Windows Vista∗∗ PCM play, rec, Float IEEE754, direct monitoring, real-time mixing, level adjustment, panning, crossfade, punch-in/punch-out, scrubbing, 3-band parametric equalizer plus Maximizer ∗ Windows
D i g i g r a m APPENDICES VX222e schematic diagram CRYSTAL CLOCK GENERATION AES/EBU IN RECEIVE AES/EBU OUT TRANSMIT DSP ANALOG LINE IN 1 - 2 ADC DAC LINE OUT Headphones OUT Level adjust LTC INTERFACE GPIO CONTROL GP OUT GP IN PCI EXPRESS BUS VX222e-Mic schematic diagram AES/EBU SYNC CRYSTAL RECEIVE CLOCK GENERATION AES/EBU IN RECEIVE AES42 compatible SRC Bypass ANALOG LINE IN 1–2 DAC ADC Level setting MICRO IN (mono) LINE OUT Level adjust LIMITER INTERFACE 48 V LTC PCI EXP
VX222e & VX222e-Mic User’s Manual Layout J1: Headphone connector: (3.
D i g i g r a m VX222e - analog cable diagram Analog cable delivered by Digigram: VX222e-Mic - analog cable diagram Analog cable delivered by Digigram: 22
VX222e & VX222e-Mic User’s Manual Wiring diagram - analog cable VX222e XLR Signal number 1 9 10 3 + - + - 2 3 J10 1 male 2 3 J11 1 male Right OUT Left OUT J2 13 6 7 15 + - + - 2 3 J12 1 female 2 3 1 female J13 Right IN Left IN Wiring diagram - analog cable VX222e XLR Signal number 1 9 10 3 J2 13 6 7 15 12 5 + - + - + - + - + - 2 3 J10 1 male 2 3 J11 1 male 2 3 J12 1 female 2 3 1 female J13 2 3 J14 1 female Right OUT Left OUT Right IN Left
D i g i g r a m VX222e - digital cable with GPIOs Schematic diagram of the cable delivered by Digigram*: VX222e - digital cable without GPIOs Schematic diagram of the cable delivered by Digigram*: * Your cable may look different if it is not a Digigram cable.
VX222e & VX222e-Mic User’s Manual Wiring diagram - digital cable with GPIOs (VX222e) Wiring Diagram – digital cable without GPIOs (VX222e) 25
D i g i g r a m VX222e-Mic - digital cable with GPIOs Schematic diagram of the cable delivered by Digigram*: VX222e-Mic - digital cable without GPIOs Schematic diagram of the cable delivered by Digigram*: * Your cable may look different if it is not a Digigram cable.
VX222e & VX222e-Mic User’s Manual Wiring diagram - digital cable with GPIOs (VX222e-Mic) Wiring diagram - digital cable without GPIOs (VX222e-Mic) 27
D i g i g r a m VX222e cable pinout Pin # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ANALOG R OUT + GND L OUT GND NC R IN L IN + GND R OUT L OUT + GND NC R IN + GND L IN - DIGITAL GPO OUT 1A NC NC AES/EBU IN AES/EBU IN + GPI INPUT 2 GND/GPO COMMON INPUT GPI INPUT 1 GND LTC IN GPO OUT 1B GPO OUT 2A GPO OUT 2B AES/EBU OUT + AES/EBU OUT - VX222e-Mic cable pinout Pin # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 28 ANALOG R OUT + GND L OUT GND MIC IN R IN L IN + GND R OUT L OUT + GND MIC IN + R IN + GND L IN - D
