CANCUN 222-Mic CANCUN 442-Mic Professional USB Audio Interface Preliminary version v0.
For technical support, please contact your supplier www.digigram.com Digigram S.A. Parc de Pré Milliet, 38330 Montbonnot - FRANCE Tel: +33 (0)4 76 52 55 01• Fax: +33 (0) 4 76 52 53 07• E-mail: info@digigram.com Digigram Asia Pte Ltd. 60 Albert Street - #19-11OG Albert Complex Singapore 189969, Singapore Tel : +65 6291 2234 • Fax : +65 6291 3433 • E-mail : info_asia@digigram.
INFORMATION FOR THE USER IMPORTANT NOTICE FEATURES Cancun 222-Mic and CANCUN 442-Mic main hardware features CANCUN 222-Mic CANCUN 442-Mic Software features HARDWARE REQUIREMENTS SUPPORTED OPERATING SYSTEMS HARDWARE INSTALLATION SOFTWARE INSTALLATION OF CANCUN UNDER WINDOWS SETTING AND MONITORING CANCUN PARAMETERS FROM THE CONTROL PANEL Starting the control panel Configuration of Preferences Configuration of audio inputs parameters Adjusting the gains on the analog inputs and displaying vu-meters Input pad a
INFORMATION FOR THE USER The user’s manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment This device complies with part 15 of FCC rules.
microphones, it may be necessary to connect the CANCUN device to two different USB Ports so as to get enough current from the PC). CANCUN devices are delivered with a ‘Y’ USB cable allowing powering the device from two USB ports. Cancun 222-Mic and CANCUN 442-Mic main hardware features ● ● ● ● ● ● ● ● ● ● ● Simultaneous analog & AES I/Os in a compact form factor A/D and D/A conversions 24-bit / frequency : 32 kHz, 44.1 kHz, 48 kHz, 88.
CANCUN 442-Mic ● ● ● ● ● 4 balanced analog mono line/mic inputs, +25 dBu max signal level 4 balanced analog mono line outputs, +10 dBu max signal level 2 additional balanced AES/EBU inputs 2 additional balanced AES/EBU outputs 1 stereo headphone output on female 6.35mm jack Software features ● ● ● ● ● ● ● ● CANCUN 222-Mic and CANCUN 442-Mic comply with the USB Audio 2.
Connect the standard type A male USB connector of the provided USB cable to a USB port (USB 2.0) or your computer. It will then automatically be detected by the operating system. Under Windows operating systems, it is necessary to install the driver package for Windows (because Windows OS don’t support USB Audio 2.0). Note: If you have several USB peripherals connected to the same USB controller of your computer, they may consume more energy than the USB controller can provide.
Accept the License Agreement, and click on Next. By default, driver files are installed in folder C:\Program Files\Digigram CANCUN. Select another folder if you want, and click on Install. Wait during the installation of the driver.
When the message “Preinstallation was successful. Click Next” to continue” is displayed, click on Next. Click on Finish to finish the installation procedure. The Cancun DirectSound devices are now listed in the Windows “Sound” control panel, in “Playback” and “Record” tabs. The ASIO devices can be selected from any ASIO application.
SETTING AND MONITORING CANCUN PARAMETERS FROM THE CONTROL PANEL Starting the control panel Cancun parameters can be set from its control panel. To open Cancun control panel, go in Start menu, Programs, Digigram CANCUN, and select Cancun Control Panel. Note that the Control Panel is automatically opened when connecting the CANCUN to the PC (provided that the driver has been installed under Windows).
Click on to set the global parameters of CANCUN. Cards: allows select the CANCUN device to set its parameters. Clocks: allows selecting the sampling clock: · Internal: sampling clock is generated internally · AES1: sampling clock is extracted from digital input AES1. Without digital signal connected to the input “AES 1”, AES1 clock selection is displayed as “not valid”. · Buffers: these parameters allow adjusting the latency of the CANCUN device.
Click on to set the parameters of audio inputs. Each slider allows adjusting the analog gain for an analog input from 0dB to + 55 dB, by 1 dB steps. It is possible to adjust the level of several inputs at the same time, by moving only one slider. To do so, press “Shift + Click” on each slider. The cursor of the slider becomes purple. When all the selected sliders are purple, just move one of them.
. When 48V is enabled on an input, the button is displayed as follows: Note that any modification of the Pad from the software Control Panel is reflected on the touch pad of Cancun, and vice versa. Displaying the signal level on the AES/EBU input(s) Click on the icon , on the bottom right of the “ANALOG” window, to view the digital level on the inputs signals.
Adjusting the gains on the analog outputs and displaying vu-meters Click on the icon to set the parameters for audio outputs. For each output, the volume slider allows adjusting the analog attenuation, 0dB to - 72 dB, by 1 dB steps. It is possible to adjust the volume of several outputs at the same time, by moving only one slider. To do so, press “Shift + Click” on each slider. The cursor of the slider becomes purple. When all the selected sliders are purple, just move one of them.
Configuration of headphone output parameters Click on the icon to adjust the settings of the headphones output. The central fader allows adjusting the signal level on the headphones output. The horizontal cursor, in top of the main fader, allows adjusting the balance between left and right channels. The heaphones output receives a mix composed of: - all the inputs (analog and AES/EBU) - all the audio played on CANCUN output devices (playback from software applications).
SETTING CANCUN PARAMETERS FROM THE CANCUN TOUCH PANEL Input gains setting Pad Press the Pad touch button to enable/disable the fixed attenuation on the desired. When PAD is ON, a green led appears. An attenuation of -30.0 dB is applied to the analog input signal. When PAD is OFF, the LED is turned off. No attenuation is applied. Note that the Pad status is reflected in the software Control Panel.
Output gains settings The analog output gain is adjustable with the upper rotary button when: · the IN/OUT touch button on the right of the rotary button is in position OUT (green led in front of OUT) · and the touch button on the left of the rotary wheel is active (green led). Pressing the button several times allows selecting analog output 1, analog output 2, both outputs, or no output (LED turned off). The analog gain adjustment is then applied to the selected output(s).
SPECIFICATIONS Configuration Bus Format USB 2.0 / Compliant with the USB 2.0 Audio specification Size 254 mm x 96 mm x 36 m Operating : temp / Humidity 0°C to +50°C / 0 % to 90 % (non condensing) Audio specifications A/D and D/A converters resolution 24 bits Sampling frequencies available 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 192 kHz Audio formats supported PCM 8, 16, 20, and 24 bits Latency 3.4 mS Analog-to-PC or PC-to-Analog (Windows 7 / 64 bits) 3.
* Not implemented yet. This will be available by software upgrade. Outputs CANCUN 222-Mic CANCUN 442-Mic 2 balanced 4 balanced +10 dBu / 2x33 Ohms +10 dBu / 2x33 Ohms 1 AES/EBU 2 AES/EBU From 0 to -72 dB by 1 dB steps From 0 to -72 dB by 1 dB steps Dedicated output stage, >10 mW from 32 to 600 Ohms Bandwidth: 10Hz-20 kHz +-0.1 dB Dynamic range : 93 dB @32 Ohms, typical Dedicated output stage, >10 mW from 32 to 600 Ohms Bandwidth: 10Hz-20 kHz +-0.
External Connectors CANCUN 222-Mic CANCUN 442-Mic 25 pin Sub-D (compatible with DB25 YAMAHA DIGITAL) XLR female for analog input 1 44 pin Sub-D HD XLR female for analog input 1 6.35mm jack 6.35mm jack Optical* Optical* mini-B USB on card side Standard, includes two A-type on PC side, one mini-B USB on card side Standard, includes two A-type on PC side, one Analog and digital I/ Os Headphone output ADAT / S-PDIF USB * Functionality not implemented yet. This will be available by software upgrade.
CANCUN 222-Mic CABLE CANCUN 222-Mic cable schematic CANCUN 222-Mic Wiring diagram CANCUN 222-Mic cable pinout 24
Pin# Signal Pin# Signal 1 ANALOG IN1 Left + 14 ANALOG IN1 Left - 2 ANALOG IN2 Right + 15 ANALOG IN2 Right - 3 Not connected 16 Not connected 4 AES IN1 + (AES SYNCHRO) 17 AES IN1 - (AES SYNCHRO) 5 ANALOG OUT1 Left + 18 ANALOG OUT1 Left - 6 ANALOG OUT2 Right + 19 ANALOG OUT2 Right - 7 Not connected 20 Not connected 8 AES/EBU OUT + 21 AES/EBU OUT - 9 Not connected 22 GND 10 GND 23 GND 11 Not connected 24 GND 12 GND 25 GND 13 GND 25
CANCUN 442-Mic CABLE CANCUN 442-Mic cable schematic 26
CANCUN 442-Mic Wiring diagram 27
CACUN 442-Mic cable pinout Pin# Signal Pin# Signal 1 ANALOG IN4 Right + 23 GND 2 ANALOG IN4 Right - 24 GND 3 ANALOG IN3 Left + 25 Not connected 4 ANALOG IN3 Left - 26 GND 5 ANALOG OUT1 Left + 27 GND 6 ANALOG OUT1 Right + 28 GND 7 ANALOG OUT3 Left + 29 GND 8 ANALOG OUT3 Left - 30 AES/EBU IN2 + 9 Not connected 31 ANALOG IN1 Left + 10 AES/EBU IN1 + (AES Synchro) 32 ANALOG IN1 Left - 11 AES/EBU IN1 - (AES Synchro) 33 ANALOG IN2 Right + 12 GND 34 ANALOG IN2 Righ