SHENZHEN DILI TECHNOLOGY CO.,LTD D0042BK User Manual Thank you very much for using our bluetooth handle, this is a brand new design. Compatible with PC, Android, SWITCH platform. Please read this manual carefully before use, and save it for future use! 一 Content 1pc 1. Bluetooth controller 2. User Manual 1pc 3. 1 meter USB to TYPE‐C data cable 1pc USB Cable Bluetooth controller ‐1‐ V:0.
二 Feature 1. Compatible with PC, Android, Nintendo switch host 2. Use distance 10 meters 3. Built‐in 600mA lithium battery 4. Use time is more than 8 hours 5. Two triggers, two joysticks, two motors 6. Support six axis 7. Support remote wake up Switch host ‐2‐ V:0.
XBOX 360 Layout: Press the Mode key for 5 seconds to switch modes Corresponding START key Corresponding BACK key Left stick: 1. It can set different functions in different games, Customers can set according to their habits. 2. The left stick is the L3 button. Arrow keys: 8 directions can be controlled in the game The brightness section has 5 gears, 4 gears 100% brightness, 3 gears 75% brightness, 2 gears 50% brightness, 1 gears 25% brightness, and 0 gears turn off the backlight.
Corresponding LB Corresponding RB Corresponding LT Corresponding RT The Turbo button setting method is as follows: 1. Press and hold the button you want to set as the TURBO function, and press the TURBO button again. If the backlight ring flashes red, the setting is successful. For example: Press and hold the set TURBO button in the game to achieve a quick hit function. 2.
Home button can return to the home page Long press for 5 seconds to shut down Function keys: A, B, X, Y, with backlight Backlight ring, turn on ice blue light, TURBO function turned on red light. TYPE C INPUT 5V,500mA Trigger ZL Trigger ZR Button L Button R Charging indicator: When charging, the green light flashes, and it is always on when fully charged ‐5‐ V:0.
Pairing key, long press for 3 seconds to enter pairing ‐6‐ V:0.
Programmable M key (no function by default): For example, M1 operation method: 1) Press and hold the M1 key, and then press the TURBO key, the backlight ring will always be pink and white, and enter the setting state. 2) Press the key you want to combine. (Such as L, R3) 3) Press M1 again to confirm the combination key, and the backlight ring turns into an ice blue light.
电脑 Xinput Wired connection settings: 1. Insert the USB cable directly into the computer USB port. 2. When LED1+LED4 is always on, the connection is successful, If it is not LED1+LED4, you can press the MODE button (screen capture button) for 5 seconds to switch. 3. You can enjoy your game. ‐8‐ V:0.
Android wired connection settings: 1. Insert the USB cable directly into the computer USB port. 2. When LED2+LED3 is always on, the connection is successful, If LED2+LED3 is not always on, you can press the MODE button (screen capture button) for 5 seconds to switch. 3. You can enjoy your game. ‐9‐ V:0.
Nintendo switch wireless connection settings: 1. Open the Nintendo switch console, select the menu "Controller"------"Change Grip and Order" 2. When the handle is turned off, press and hold the pairing button for 3 seconds, the channel light flashes, and the pairing starts. 3. When the channel LED is always on, the connection is successful. 4. You can enjoy your game. Home button After pairing, in the shutdown state, short press the HOME button to turn on the switch to wake up the Switch host remotely.
Nintendo switch wired connection settings: 1. Open the Nintendo switch console and select the menu "System Settings"‐‐‐‐"Controllers and sensors"‐‐‐‐"Pro Controller wired Communication" opens. 2. Directly plug the handle USB cable into the charging dock of the Nintendo console USB 2.0 port. 3. When the channel LED is always on, the connection is successful. 4. You can enjoy your game. Note: The USB 2.0 port of the switch host supports wired controllers, and the USB 3.
The host has 8 channels automatically assigned: LED1 is always on, it is channel 1. LED1+LED2 is always on, it is channel 2 LED1+LED2+LED3 is always on, it is channel 3 LED1+LED2+LED3+LED4 is always on, it is channel 4 LED1+LED4 is always on, it is channel 5 LED1+LED3 is always on, it is channel 6 LED1+LED3+LED4 is always on, it is channel 7 LED2+LED3 is always on, it is channel 8 ‐12‐ V:0.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.