SOFTWARE SUITE User’s Manual
Bluetooth Software Suite User’s Manual About this manual This User’s Manual will provide you with the information needed to make the most of the Bluetooth Software Suite. If you need basic information on the Bluetooth technology, please refer to the Beginner's Guide accompanying the Bluetooth Software Suite. Both the Beginner's Guide and this User's Manual are included on the Bluetooth Software Suite CDROM.
Bluetooth Software Suite User’s Manual Contents About this manual 2 CAUTION 2 Getting started 5 Bluetooth Neighborhood 5 Introduction 5 Opening Bluetooth Neighborhood 6 Bluetooth Neighborhood window 7 Profiles and services 8 List view 9 File transfer 28 Audio 30 Bluetooth COM ports 32 General information 32 Bluetooth COM port settings 33 Bluetooth COM port link establishment 36 LAN 36 DUN 37 FAX 38 Basic functions 11 Naming your local device 11 Device discovery 12 Service discovery 13 Link establishmen
Bluetooth Software Suite Bluetooth Neighborhood properties 50 General 50 Settings 51 Device discovery 52 Trust 53 Security 55 Bonding 57 User’s Manual Index 71 Bluetooth unit settings 59 Enabling/disabling Bluetooth unit 59 Indication of Bluetooth unit state 59 Remote device settings 60 Remote device properties 60 General 60 Trust 61 Hardware 63 LED operation 63 PC card technical specifications 63 USB adapter technical specifications 63 Diagnostics 64 Appendices 66 Appendix A: Profiles 66 Appendix B:
Bluetooth Software Suite User’s Manual Getting started Bluetooth Neighborhood Introduction With the Bluetooth™ Software Suite, you can establish wireless links between your computer and other Bluetooth enabled devices.
Bluetooth Software Suite User’s Manual Opening Bluetooth Neighborhood The Bluetooth Neighborhood and Windows Explorer are highly integrated. Therefore, Windows Explorer is the natural place to open the Bluetooth Neighborhood: Open Windows Explorer, and select the Bluetooth Neighborhood among the folders in Windows.
Bluetooth Software Suite User’s Manual Bluetooth Neighborhood window When you open the Bluetooth Neighborhood, the * following window appears : 1: Menu bar: Contains standard Windows pulldown menus and a Bluetooth menu. We will deal with the Bluetooth menu in later sections. Furthermore, from the menu bar, you can access the Bluetooth Software Suite online help. 2: Tool bar: Contains standard Windows tools like Back, Forward, View, etc.
Bluetooth Software Suite The setup of the Bluetooth Neighborhood window depends on your Windows Explorer setup. Thus, the above example does not show all the standard Windows components that may be added to the window. User’s Manual Profiles and services Interoperability depends on profiles Any Bluetooth device has at least one profile, i.e. an application that you can use the device for. When two devices are to interoperate, i.e. communicate with each other, they must have a shared profile.
Bluetooth Software Suite User’s Manual List view The list view in the main window contains three elements: My Inbox, My Shared Files, and a list of discovered remote devices. When an item is selected in the Bluetooth Neighborhood, for instance My Inbox or a remote device, the list view will display the contents of that item. (In this connection, the contents of a remote device are the services it supports).
Bluetooth Software Suite Remote devices or services: The devices shown in the main window list view are the remote Bluetooth devices that your device has discovered during device discovery. The icons show what kind of device each remote device is (device class), like the desktop and laptop computer icons in the following example: User’s Manual When service discovery has been carried out on a remote device, the list view will change to showing the services facilitated by the remote device in question.
Bluetooth Software Suite User’s Manual Basic functions Naming your local device Before you start communicating with remote users, you should select the name that you want your device to present itself with when discovered by remote devices. To do so: 2. At the top of the dialog box, click the tab Settings. 1. On the Bluetooth menu, click Bluetooth Neighborhood Properties: The following dialog box opens: 3.
Bluetooth Software Suite For information on the item Bluetooth Device Class in the dialog box shown above, see the section “Bluetooth Neighborhood properties” – “Settings”. User’s Manual Device discovery Before your local device can get to communicate with a remote Bluetooth device, it needs to discover the remote devices that are available within range. This activity is called device discovery. To carry out device discovery: On the Bluetooth menu, click Device Discovery.
Bluetooth Software Suite User’s Manual Service discovery Before trying to establish a link to a remote device, it may be useful to know which services the device facilitates. To find out, you can carry out service discovery. Double-click the remote device in the main window list view, for instance the one named "Bluetooth Client Device": Note: The main window list view does not show your local device, only the discovered remote ones.
Bluetooth Software Suite User’s Manual Link establishment When you have carried out service discovery, you can establish a link to the remote device. You can make use of any service that both your device and the remote device support. Drag the local service to the corresponding remote service: In this example, a DUN link is being established by dragging the local DUN service to the remote device.
Bluetooth Software Suite User’s Manual Disconnecting Status information To disconnect a link established to a remote device: The Bluetooth Neighborhood status bar provides you with information on the item currently selected in the Bluetooth Neighborhood, like the name of a remote device (“Eddie’s Notepad””) or My Inbox. Also, message boxes keep you informed of the progress of any activity, and let you know if anything goes wrong.
Bluetooth Software Suite User’s Manual View details One of the Windows-like features of the Bluetooth Software Suite is the possibility of changing the settings of the list view. What is of special interest, however, is the Details information of the list view: 1. 2. Details concerning remote devices In the main window, the list view can display information on each of the remote devices discovered: On the menu bar, click View. Click Details.
Bluetooth Software Suite Details concerning remote services When you have carried out service discovery on a remote device, the list view can display the following information on the services that the remote device supports: • Name: The name of the remote service. • Description: The name of the profile that supports the remote service. If your device features the same profile, interoperability between the two devices is possible.
Bluetooth Software Suite User’s Manual Device folders What is a device folder? In the Bluetooth Neighborhood main list view, you can create device folders: folders containing a number of remote devices. You can communicate with a device folder as with any single remote device. When doing so, you will be communicating with all the devices in the folder at the same time.
Bluetooth Software Suite User’s Manual Online help You can open the Bluetooth Software Suite online help by clicking the menu bar item Help or pressing the key F1. Help provides you with links to the online version of this User’s Manual. The design of the Help function is similar to the Windows Help: Each of the remote devices included in the device folder “Conference” will now receive the business card. Each tab helps you locate information in a different way.
Bluetooth Software Suite User’s Manual Local services Object transfer With the Bluetooth Neighborhood, you can transfer such objects as business cards, e-mail messages, calendar objects, and notes. If Microsoft Outlook is installed on your computer, that is where you create and send objects. If Microsoft Outlook is not installed on your computer, you can use the Object Editor included in the Bluetooth Software Suite.
Bluetooth Software Suite User’s Manual A new icon on the Local Services bar shows that your default business card is now available for transfer to remote devices: From the Object Editor 3. Drag the item containing your own contact information into the Local Services bar: An alternative way of registering your default business card is by means of the Object Editor. To open the Object Editor: 1. On the Bluetooth menu, point to Profile Properties, and click OBEX Object Push.
Bluetooth Software Suite User’s Manual 3. In the item Default Business Card, click the button Create New. The Object Editor opens: 2. At the top of the dialog box, click the tab Object Push Settings. 4. In the Object Editor, type the information you want to include in your default business card. You can include information about your name and one or more e-mail addresses, telephone numbers, and addresses. 5. To save the business card: On the Object Editor File menu, click Save.
Bluetooth Software Suite 6. To quit the Object Editor: Click the OK button. You will now return to the dialog box OBEX Object Push Properties – Object Push Settings. Here you will see the name of your default business card, which is the same as the name typed in the Object Editor. User’s Manual Editing an existing business card in the Object Editor: As appears from the information above, the Object Editor can be used to create a new default business card.
Bluetooth Software Suite User’s Manual Business card transfer Before your default business card can be transferred to remote devices, you must make it available among your local services as described in the section "Making default business card available".
Bluetooth Software Suite Sending objects directly from MS Outlook Microsoft Outlook users can send objects (like messages or notes) directly from Microsoft Outlook: Drag the object either to the remote Inbox folder or to the remote device (or device folder): User’s Manual Receiving objects When your local Bluetooth device receives an object (a default business card, message, note, or calendar object) from a remote device, the object is placed in My Inbox: If you have Microsoft Outlook: When you double-c
Bluetooth Software Suite User’s Manual Creating objects in the Object Editor If Microsoft Outlook is not installed on your computer, you may use the Object Editor to create objects – messages, notes, and cards. Note that objects created in the Object Editor are not saved as objects but as files. You can then transfer these files as you would any file in the Bluetooth Neighborhood (cf. “File transfer”). 1. To open the Object Editor: Click Start, point to Programs, point to Bluetooth Software Suite ...
Bluetooth Software Suite User’s Manual Cards are created in the Object Editor itself (by typing the information you want to include); messages and notes are created in a new window. The following example shows the window that pops up on clicking VMessage as shown above: 5. Select the location and name of the new file. 6. Click Save. When you have saved the file, you can transfer it like any file using the Bluetooth Neighborhood. For more information, see “File transfer”. 3.
Bluetooth Software Suite User’s Manual File transfer File transfer is a way of sharing files with others. In the Bluetooth Neighborhood, you can make a file available to a remote user by placing it in the folder My Shared Files: When a remote user opens your folder My Shared Files, he will have access to the file you placed in it. Sending a file to a remote device When a remote user has carried out service discovery on your device, he can open your folder My Shared Files and the files in it.
Bluetooth Software Suite User’s Manual No matter which way you choose to transfer a file to a remote device, the user of that device will receive the file in his Shared Files folder. Receiving files When your local Bluetooth device receives a file sent from a remote device, the file is placed in My Shared Files. In the above example, a file is being dragged from My Documents to the Shared Files folder of the remote device.
Bluetooth Software Suite User’s Manual Audio An audio link makes it possible to transfer sound from one Bluetooth device to another. There are basically two ways of using an audio link: • Using your computer as a Bluetooth Audio Device: Connect a headset to it, establish an audio link to one or more remote devices, and then use the computer like a walkie-talkie. The sound coming from the headset over the Bluetooth link will be seen by the operating system as coming from a sound card.
Bluetooth Software Suite User’s Manual When the link establishment has been carried out successfully, you can make use of either the audio device or speaker phone feature as described above. PC speaker The Bluetooth speaker phone feature involves using the PC speaker. This can be enabled/disabled from the Local Services bar: 1. Right-click the local/remote Audio service: 2. Click enable/disable. When the speaker has been enabled, you can make use of the Bluetooth speaker phone feature.
Bluetooth Software Suite User’s Manual Bluetooth COM ports General information What is a Bluetooth COM port? Physical communications (COM) ports are used when two serial devices are connected by means of a cable. A Bluetooth COM port, however, is a virtual COM port providing a wireless alternative to a physical one.
Bluetooth Software Suite In "Bluetooth COM port settings" we will look into how you can add and remove Bluetooth COM ports, and change the settings concerning which profiles are associated with which Bluetooth COM ports. User’s Manual Bluetooth COM port settings Before you can make use of a Bluetooth COM port link, you must associate one or more appropriate profiles with a Bluetooth COM port and then add the COM port to your Local Services bar (cf. “Bluetooth COM ports” – “General information”).
Bluetooth Software Suite Adding Bluetooth COM ports User’s Manual Note: Before you can use the new Bluetooth COM port, you have to restart your computer. To add a Bluetooth COM port: 1. In the Bluetooth Configuration Tool window, click Add. The following dialog box opens: Note: Windows NT users will not see the new Bluetooth COM port icon on the local services bar until the computer has been restarted. Deleting Bluetooth COM ports If you want to delete a Bluetooth COM that you no longer need: 2.
Bluetooth Software Suite 3. To confirm that you want to delete the Bluetooth COM port, click Yes. The Bluetooth COM port will now be removed from the Local Services bar. Note: Windows NT users have to restart the computer for the changes to take effect. Associating and removing profiles from existing Bluetooth COM ports In the Bluetooth Configuration Tool, you can see which profiles are associated with which Bluetooth COM ports.
Bluetooth Software Suite User’s Manual Bluetooth COM port link establishment LAN When you have added a Bluetooth COM port to the Local Services bar (as described in the section “Bluetooth COM port settings”), you can establish a link to a remote device. The LAN service is used for accessing a Local Area Network through a dial-up networking gateway. You can use this service to establish a link to a remote Bluetooth enabled computer which has access to a LAN.
Bluetooth Software Suite User’s Manual DUN The DUN service, i.e. dial-up networking, is used for accessing the Internet through a DUN gateway. You can use this service to establish a link to a Bluetooth enabled modem or computer which has access to a modem. For information on how to set up the program to dial up automatically when a LAN link is established, see “LAN Access settings”. Note: The LAN Access Profile requires a Bluetooth COM port.
Bluetooth Software Suite User’s Manual FAX The FAX service is used for sending fax messages, using the fax software on your computer. You can use this service to establish a link to a remote Bluetooth enabled fax machine or computer which has access to a fax machine. For information on how to set up the program to dial up automatically when a DUN link is established, see “DUN Access settings”. Note: The Dial-up Networking Profile requires a Bluetooth COM port.
Bluetooth Software Suite User’s Manual Network In this section, we will focus on setting up and establishing Bluetooth networks. We will assume that you have some previous experience in ordinary, i.e. wired networks using Microsoft networking. If that is not the case, please refer to the Microsoft Windows online help for information on Microsoft networking. Note: The FAX Profile requires a Bluetooth COM port. By default, the profile is associated with Bluetooth COM port 7.
Bluetooth Software Suite Network link establishment Establishing a Bluetooth ad hoc network link is done in the same way as you establish other Bluetooth links: In the Bluetooth Neighborhood main window, drag the local service Network to the remote device, device folder, or service: User’s Manual Local device settings Local profile properties General information The Bluetooth Software Suite provides you with general information on the profiles that your device supports.
Bluetooth Software Suite The mentioned information appears from the item General Information: User’s Manual Enabling/disabling profile You can enable or disable each of the profiles that your device supports. If you enable a profile, remote users will be allowed to access the services associated with the profile. If you disable a profile, remote users will not be allowed to access the services associated with the profile. Enabling/disabling a profile is done from the Profile Properties dialog box.
Bluetooth Software Suite User’s Manual Object Push Settings The profile OBEX Object Push is used for transferring objects: messages, notes, cards (including the default business card), and calendar objects. In the Object Push Settings dialog box, you can view or edit the location of the physical Inbox folder and the default business card. To open the Object Push Settings dialog box: 1. On the Bluetooth menu, point to Profile Properties, and click OBEX Object Push. 2.
Bluetooth Software Suite User’s Manual Object Push - Security The profile OBEX Object Push is used for transferring objects: messages, notes, cards, and calendar objects. In the Security dialog box, you can make decisions concerning the security aspects of receiving and sending objects.
Bluetooth Software Suite User’s Manual File Transfer Settings The profile OBEX File Transfer is used for transferring files. In the File Transfer Settings dialog box, you can view or edit the location of the physical My Shared Files folder. Furthermore, you can make decisions concerning the security aspects of remote users’ access to the files in “My Shared Files”. To open the File Transfer Settings dialog box: 1. On the Bluetooth menu, point to Profile Properties, and click OBEX File Transfer. 2.
Bluetooth Software Suite User’s Manual Audio settings In this section we will focus on various settings in connection with the Generic Audio profile. As already mentioned in the section “Audio”, there are basically two ways of using an audio link: • The Bluetooth audio device feature, using a headset, the Bluetooth link serving as a sound card. • The Bluetooth speaker phone feature, using the computer speaker and microphone like a phone, the audio coming from an ordinary sound card.
Bluetooth Software Suite User’s Manual Bluetooth Speaker Phone Setup Wizard During the installation of the Bluetooth Software Suite, some default settings were made automatically for the sound of the Bluetooth speaker phone feature. In many cases, however, these default settings will not secure your system the best sound quality possible. Therefore, we recommend that you run the application the Bluetooth Speaker Phone Setup Wizard to configure your system for optimal sound performance.
Bluetooth Software Suite • User’s Manual Using the default settings (the same as those made during the installation of the Bluetooth Software Suite). This way is recommended if both of the above fail. Click: Follow the onscreen instructions to complete the configuration of your system for optimal sound performance of the Bluetooth speaker phone feature.
Bluetooth Software Suite User’s Manual LAN Access settings In connection with LAN link establishment, the Bluetooth Software Suite can establish a dial-up connection automatically. Setting up the program for this is done from the LAN Access Properties dialog box. 1. On the Bluetooth menu, point to Profile Properties, and click LAN Access. 2. At the top of the LAN Access Properties dialog box, click the tab LAN Access Settings. The following dialog box appears: 3.
Bluetooth Software Suite User’s Manual Dial-up Networking settings In connection with DUN link establishment, the Bluetooth Software Suite can establish a dial-up connection automatically. Setting up the program to do so is done from the Dial-up Networking Properties dialog box. 1. On the Bluetooth menu, point to Profile Properties, and click Dial-up Networking. 2. At the top of the Dial-up Networking Properties dialog box, click the tab Dial-up Networking Settings.
Bluetooth Software Suite User’s Manual Bluetooth Neighborhood properties General The Bluetooth Software Suite provides information on the properties of the Bluetooth Neighborhood. This information is accessed from the Bluetooth Neighborhood Properties dialog box. To open this: On the Bluetooth menu, click Bluetooth Neighborhood Properties.
Bluetooth Software Suite User’s Manual Settings In the Bluetooth Neighborhood Properties – Settings dialog box, you can set such identity information as the name and class of your local device. To open the dialog box: 1. On the Bluetooth menu, click Bluetooth Neighborhood Properties. 2. Click the tab Settings.
Bluetooth Software Suite User’s Manual Device discovery In connection with device discovery, you can make a number of settings in the Bluetooth Neighborhood Properties – Device Discovery dialog box. To open this dialog box: • In Device Discovery you can choose for device discovery to take place only when you activate the function manually (which is the default setting), or for device discovery to be initiated automatically at certain intervals.
Bluetooth Software Suite • In Expire Discovered Devices you can decide to have discovered remote devices removed automatically from the Bluetooth Neighborhood list view when they have not been seen for a specified period of time. Note that if the dialog box item Previously Discovered Devices is not selected, the list view will only display the remote devices discovered during the latest device discovery.
Bluetooth Software Suite User’s Manual You can decide whether your device should: Advanced link policy – Reject a link establishment attempt; or – Prompt you before accepting link establishment; or To view or change the trust relationship settings for one or more discovered remote devices, click Advanced Settings: – Accept link establishment automatically. (This is the default setting).
Bluetooth Software Suite User’s Manual indicates which default trust relationship settings have been selected for it. Security To change the trust relationship setting for a device in the Advanced Link Policy dialog box: In the Bluetooth Neighborhood Properties – Security dialog box, you can make a number of decisions concerning the security of your local device. To open this dialog box: Drag the device from its present position into the box representing the trust relationship you want for the device.
Bluetooth Software Suite • Security Mode can be set to either No Security or Link level security. If a device has selected link level security, no remote device can connect to it without bonding (see “Bonding”. ) Furthermore, only when you have selected link level security can you use encryption (see below). • User’s Manual • Discoverability Mode refers to whether or not other devices will be allowed to discover your device.
Bluetooth Software Suite User’s Manual Bonding Bonding refers to the creation of a link key – a bond – between two devices. Bonding is used when a device requires link level security (see “Security” for information on how to do so). When a remote device attempts to connect to the device requiring link level security, the users of both devices will be prompted for a password. They must then enter the same password.
Bluetooth Software Suite • User’s Manual In Default Bluetooth Bonding Expiration, you can set bonding to expire when the link is disconnected; after a specified period of time; or never. (The default setting is: Never). Note: The settings you make in the Bluetooth Neighborhood Properties – Bonding dialog box are default settings that will be applied to all remote devices.
Bluetooth Software Suite User’s Manual Bluetooth unit settings Indication of Bluetooth unit state The settings of the Bluetooth unit are controlled from the Bluetooth Control Center. From this application, which is located in the lower right corner of the screen, you can enable/disable the Bluetooth unit. Also, the Bluetooth Control Center icon indicates the state of the Bluetooth unit.
Bluetooth Software Suite User’s Manual Remote device settings Remote device properties General For information on the properties of a remote device: 1. Right-click the remote device. 2. Click Properties. The Remote Device Properties – General dialog box opens. At the top of this dialog box, you will see the name of the remote device. In addition, the box contains the items General Information, Historical Information, and Services used.
Bluetooth Software Suite • • • General Information provides such identity information on the remote device as its address, device class, and service class. Historical Information tells you when the device was last seen by your device, and when it was last linked to it. Services used shows which services of the remote device are currently connected to your local device, if any. Also, you can see which role the remote device plays in the piconet, i.e. master or slave.
Bluetooth Software Suite User’s Manual • Device Bonding Expiration allows you to make settings concerning the duration of bonding between your device and the remote one. You can set the bonding to expire when the link is disconnected, after a specified period of time, or never. (The default settings is: Never). For more information on bonding, see "Bonding".
Bluetooth Software Suite User’s Manual Hardware LED operation The green LED indicator on the PC card/USB Adapter is lit for 10 seconds after power up, and is flashing when the Bluetooth unit is communicating with a remote Bluetooth unit. PC card technical specifications • Type II PC card • Compliant with PC Card Standard Release 7 • 0dBm or +20dBm Bluetooth radio designed in accordance with Specification of the Bluetooth System v1.
Bluetooth Software Suite User’s Manual Diagnostics After the installation, it is recommendable to check that the hardware for the Bluetooth Software Suite (i.e. either a PC card or a USB adapter) has been installed properly. This is done by performing a loopback test. The test is carried out from the Bluetooth Configuration Tool: 1. Open the Microsoft Control panel. 2. Double-click Bluetooth Configuration Tool.
Bluetooth Software Suite User’s Manual • Ensure that the hardware is installed correctly, whether a matter of inserting a PC card or connecting a USB adapter (cf. the Installation Manual). • Restart your computer.
Bluetooth Software Suite User’s Manual Appendices Appendix A: Profiles The following table shows which profiles the Bluetooth Software Suite currently supports and which role each profile plays: The profile: Supports the following: Ethernet Network Generic Audio OBEX File Transfer OBEX Object Push Serial Port Generic Access Service Discovery Application Dial-up Networking Fax LAN Access Generic Object Exchange Network service Audio service File transfer Object transfer Bluetooth COM port service All ot
Bluetooth Software Suite User’s Manual Appendix B: List view icons In the Bluetooth Neighborhood list view, the following icons are used to represent remote devices and remote services respectively: Unclassified phone Remote devices: LAN access point Desktop computer Laptop computer Server-class computer Handheld PC/PDA Palm sized PC/PDA Cellular phone LAN access point, 33-50% utilized Audio – headset Unclassified audio Modem Peripheral Unclassified Cordless phone Smart phone 67
Bluetooth Software Suite User’s Manual Remote services: Audio Bluetooth COM port LAN DUN FAX Business card Network Inbox Shared Files Device folder 68
Bluetooth Software Suite User’s Manual Appendix C: Regulatory statements General This product complies with any mandatory product specification in any country where the product is sold. In addition, the product complies with the following. Note that any changes or modifications to this equipment not expressly approved by the manufacturer may void the FCC authorization to operate this equipment.
Bluetooth Software Suite User’s Manual Japan Japan office: Address: BIA Inc. No. 202 Gobancho House 4-22 Gobancho Chiyoda-Ku, Tokyo 102-0076 Phone 03 5276 5984 Fax: 03 5276 0625 E-mail: biasib@gol.
Bluetooth Software Suite User’s Manual Index About this manual, 2 Advanced link policy, 54, 55 Audio, 30 Audio link establishment, 30 Audio path, 45 Audio quality, 45 Audio settings, 45 Basic functions, Bluetooth Neighborhood, 11 Bluetooth audio device, 30 Bluetooth bonding, 57 Bluetooth COM port link establishment, 36 Bluetooth COM port settings, 33 Bluetooth COM port, what is, 32 Bluetooth COM ports, general information, 32 Bluetooth COM ports, how to add, 34 Bluetooth COM ports, how to associate and rem
Bluetooth Software Suite User’s Manual Devices, icons, 67 Devices, remote, in list view, 10 Diagnostics, 64 Dial-up networking settings, 49 Disabling Bluetooth unit, 59 Disabling profile, 41 Disconnecting, 15 Discoverability mode, 56 DUN, 37 EFTA, 69 Enabling Bluetooth unit, 59 Enabling profile, 41 Encryption mode, 56 European Union (EU) and EFTA, 69 Expire discovered devices, 53 FAX, 38 File transfer, 28 File transfer settings, 44 Files, receiving, 29 Files, receiving, security, 44 Getting started, 5 Hard
Bluetooth Software Suite User’s Manual Online help, 19 PC card, 63 PC speaker, 31 Previously discovered devices, 52 Profile properties, 40 Profile, enabling/disabling, 41 Profiles and services, 8 Profiles, interoperability, 8 Profiles, list, 66 Receiving files, 29 Receiving objects, 25 Regulatory statements, 69 Remote device properties, 60 Remote device properties – General dialog box, 60 Remote device properties, general information, 61 Remote device settings, 60 Remote device settings, bonding expiration