ESL Tag / PT-1010, PT-2020
FCC User manual: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
INDEX Page 1 of 1 Index [GENERAL INFORMATION] [PRODUCT INFORMATION] [TYPICAL OPERATION] [INFO SERVER ADMINISTRATOR MENU] [INFO PAD ADMINISTRATOR MENU] [CONTENTS] USER MANUAL Digi Info ESL Tentative 04 Ver. 0.18.080122.1 (Updated on 15/03/08) file://F:\My Documents\ESL Done PCB\Manual\Digi Info ESL User Manual Edition 0...
ENTRY TO ADMINISTRATOR Page 1 of 1 ENTRY TO ADMINISTRATOR MENU SCREEN [Home] [Up] 1. Press [F2] button to open Info Cast application 2. At Info Cast Main Screen, touch 3. Configure the setting as desired key to enter to Administrator Menu Note: No password required for entry file://F:\My Documents\ESL Done PCB\Manual\Digi Info ESL User Manual Edition 0...
INFO PAD ADMINISTRATOR MENU Page 1 of 1 INFO PAD ADMINISTRATOR MENU [Home] Info Pad Administrator Menu is used by store people to do maintenance like e.g. initialize tag item, check tag or item information, update price and etc. To use these operations, it is required for the user to set Info Pad setting, format tag, and etc in the Info Pad Serviceman Menu Screen in advance.
INITIALIZE AND PRINTING MODE Page 1 of 4 INITIALIZE AND PRINTING MODE [Home] [Up] Initialize and Printing Mode is used to initialize a tag, assign an item link (tag id), price, beacon id and etc, to tag and also send sticker for printing to Info Pad, then send to wireless printer from Info Pad. It also update database with item link (tag id) to specific item. Note: Only formatted tag can be initialized, it is required to format tag in advance and format can be done in Serviceman menu.
INITIALIZE AND PRINTING MODE Page 2 of 4 Note: Touch [BACK] to exit from Initialize and Printing Mode screen 3. Scan barcode for initialize Note: The barcode must exist and linked to item in database Note: Also able to enter barcode value by keypad 4. Touch Info Pad Magnet area to Tag Magnetic key area to initialize Formatted Tag: 5. Wait for connection to server and initialized tag with item data e.g. price and tag symbol or etc Barcode Scanned: file://F:\My Documents\ESL Done PCB\Manual\Digi Inf
INITIALIZE AND PRINTING MODE Page 3 of 4 Initialize Tag: Completed Operation: file://F:\My Documents\ESL Done PCB\Manual\Digi Info ESL User Manual Edition 0...
INITIALIZE AND PRINTING MODE 6. Page 4 of 4 Then server will send sticker printing command to Info Pad Note1: Then use wireless printer to print sticker from Info Pad Note2: When finish initialization, message as “Init and Print Finish” displayed and tag display the value and sticker printed, indicate successful of initializing file://F:\My Documents\ESL Done PCB\Manual\Digi Info ESL User Manual Edition 0...
INITIALIZE MODE Page 1 of 3 INITIALIZE MODE [Home] [Up] Initialize Mode is used to initialize a tag and assign an item link (tag id), price, beacon id and etc to tag. It also update database with item link (tag id) to specific item. Note: Only formatted tag can be initialized, it is required to format tag in advance and format can be done in Serviceman menu.
INITIALIZE MODE Page 2 of 3 Note: Touch [BACK] to exit from Initialize Mode screen 3. Scan barcode for initialize Note1: The barcode must exist and linked to item in database Note2: Also able to enter barcode value by keypad 4. Touch Info Pad Magnet area to Tag Magnetic key area Formatted Tag: file://F:\My Documents\ESL Done PCB\Manual\Digi Info ESL User Manual Edition 0...
INITIALIZE MODE 5. Page 3 of 3 Wait for connection to server and initialized tag with item data e.g. price and tag symbol or etc Note: When finish initialization, scanned barcode data cleared and tag display the value, indicate successful of initializing Loading Initialize Data: Initialize tag: file://F:\My Documents\ESL Done PCB\Manual\Digi Info ESL User Manual Edition 0...
ITEM INFO Page 1 of 2 ITEM INFORMATION [Home] [Up] Item Information is used to check information about tag and item barcode. Entry to Item Information 1. At the Administrator Menu Screen 2. Press [ITEM INFORMATION] button to go to Item Information screen Note: Touch [BACK] to exit from Item Information screen 3. Scan barcode to display item information Note: The barcode must exist and linked to item in database Note: Also able to enter barcode value by keypad file://F:\My Documents\ESL Done PCB\Ma
ITEM INFO 4. Page 2 of 2 Wait for the item information display screen file://F:\My Documents\ESL Done PCB\Manual\Digi Info ESL User Manual Edition 0...
PRINTING MODE Page 1 of 2 PRINTING MODE [Home] [Up] Printing Mode is used to printing sticker for selected tag item. Note: Wireless printer and Info Pad setting for wireless required to be set in advance, see “Info Pad setting” under operation manual. Entry to Printing Mode 1. At the Administrator Menu Screen 2. Press [PRINT] button to go to Printing Mode screen Note: Touch [BACK] to exit from Printing Mode screen 3.
PRINTING MODE Page 2 of 2 4. Touch Info Pad Magnet area to Tag Magnetic key area to send tag data to info server and retrieve information of tag from the info server (will receive in Info Pad) 5. Then send print command from Info Pad to Wireless Printer to print the sticker file://F:\My Documents\ESL Done PCB\Manual\Digi Info ESL User Manual Edition 0...
SHOW PAGE Page 1 of 2 SHOW PAGE 2 [Home] [Up] Show Page 2 is used to view then second page of tag. It is useful for viewing secondary data for the item. Note: Show page 2 in info pad run only for 8 second. Entry to Show Page 2: 1. At the Administrator Menu Screen 2. Press [SHOW PAGE 2] button to go to Show Page 2 screen Note: Touch [BACK] to exit from Show Page 2 screen 3.
SHOW PAGE Page 2 of 2 file://F:\My Documents\ESL Done PCB\Manual\Digi Info ESL User Manual Edition 0...
SHOW TRANSACTION Page 1 of 2 SHOW TRANSACTION [Home] [Up] Show Transaction is used to check the transaction data for the scanned barcode. Entry to Show Transaction 1. At the Administrator Menu Screen 2. Press [SHOW TRANSACTION] button to go to Show Transaction screen Note: Touch [BACK] to exit from Show Transaction screen 3. Scan barcode to check the transaction data file://F:\My Documents\ESL Done PCB\Manual\Digi Info ESL User Manual Edition 0...
SHOW TRANSACTION Page 2 of 2 Example of Transaction Data Note1: The barcode must exist and linked to item in database Note2: Also able to enter barcode value by keypad file://F:\My Documents\ESL Done PCB\Manual\Digi Info ESL User Manual Edition 0...
UPDATE PRICE Page 1 of 2 UPDATE PRICE [Home] [Up] Update Price is used to update (by batch) the displayed tag data for the scanned barcode. Entry to Update Price 1. At the Administrator Menu Screen 2. Press [UPDATE PRICE] button to go to Update Price screen Note: Touch [BACK] to exit from Update Price screen 3. Scan barcode to update the displayed price data for the barcode file://F:\My Documents\ESL Done PCB\Manual\Digi Info ESL User Manual Edition 0...
UPDATE PRICE Page 2 of 2 Note1: The barcode must exist and linked to item in database Note2: Also able to enter barcode value by keypad Note3: After scanned barcode, data cleared indicate successful of operation file://F:\My Documents\ESL Done PCB\Manual\Digi Info ESL User Manual Edition 0...
