Trademark: DIGI Model Name: IB-3100 Product Name: Base Station
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Index [GENERAL INFORMATION] [PRODUCT INFORMATION] [TYPICAL OPERATION] [INFO SERVER ADMINISTRATOR MENU] [INFO PAD ADMINISTRATOR MENU] [CONTENTS] USER MANUAL Digi Info ESL Tentative 04 Ver. 0.18.080122.
INFO SERVER ADMINISTRATOR MENU [Home] Info Server Administrator Menu is used by store people to do daily maintenance e.g. retrieves tag data, send display, sticker printing and etc. To use these operations (e.g. send display, sticker printing and etc), it is required for the user to program/design setting/format in the Info Server Serviceman Menu Screen in advance.
PRICE TAG [Home] [Up] Price Tag is used to view data/values that displayed on tag for each item, to print sticker and update data to single tag each time.
ENTRY TO PRICE TAG [Home] [Up] 1. At the Info Cast Main Screen 2. Press [ADMIN] button to enter to Administrator Menu and enter to Price Tag screen Note: No "User Name" or "Password" required using this mode.
~ OR ~ 1. During in other screen 2.
3.
OVERVIEW OF PRICE TAG [Home] [Up] 1. 2. 3.
4. Item Name Display item name of the searched item 5.
c) 2nd Screen To view the data and value displayed in 2nd screen Press [2ND SCREEN] Tab/button to view the 2nd screen
d) Promo Screen 6.
To resend item data to tag, this function is useful when the tag is hang or display incomplete data Press [BACK] button to exit Send Display screen and return to price tag main screen a) [SEND 1ST W/O SYMBOL] button - to send the 1st screen numeric/digits data, without symbol e.g. decimal point, Sales message and etc to selected tag b) [SEND 1ST W/ SYMBOL] button - to send the 1st screen numeric/digits data, with symbol e.g.
Press [BACK] button to exit Sticker & Paper Tag Printing screen and return to price tag main screen a) [PRINT] button - to print sticker or paper tag for selected item b) [STICKER TYPE] selection - to select available sticker type for printing Note: Sticker type is required to be programmed in Sticker/Paper Tag Format Design in advance 8.
Press [BACK] button to exit Blinking Screen mode screen and return to price tag main screen a) [START] button - to start blinking tag display b) [STOP] button - to stop blinking tag display c) [SCREEN NUMBER] selection - to select page of tag to be displayed after stop blinking operation Note1: Press button, to select data from available list Note2: Click box to enter desired data Note3: Press [CLEAR] button to clear data retrieved or entered Note3: press button, to exit from Maintenance screen, P
LISTING ITEM [Home] [Up] Listing Item is used to search data, to check error log, to print sticker and update data to multiple price tag.
ENTRY TO LISTING ITEM [Home] [Up] 1. At the Info Cast Main Screen Note: No "User Name" or "Password" required using this mode 2.
3. Then press [LISTING ITEM] button to go to Listing Item screen 4.
OVERVIEW OF LISTING ITEM [Home] [Up] 1. 2.
3.
4. 5.
6. Item Name To search item by a Item Name data 7.
8. Promo Code To search item by a Promotion Code 9.
10. Tax Rate To search item by a Tax Rate value 11.
12. Ordinary Price To search item by a Ordinary Price value 13.
14. Unit Price To search item by Unit Price value range 15.
Press [DISPLAY] to go to Search Item Display screen Note: Press [LISTING ITEM] button to exit Search Item Display screen i) SEND DISPLAY to send data to selected tag from the search list Press [SEND DISPLAY] button to enter Send Display screen
To resend item data to tag, this function is useful when the tag is hang or display incomplete data Press [BACK] button to exit Send Display screen and return to price tag main screen a) [SEND 1ST W/O SYMBOL] button - to send the 1st screen numeric/digits data, without symbol e.g. decimal point, Sales message and etc to selected tag b) [SEND 1ST W/ SYMBOL] button - to send the 1st screen numeric/digits data, with symbol e.g.
a) [PRINT] button - to print sticker or paper tag for selected item b) [STICKER TYPE] selection - to select available sticker type for printing Note1: Sticker type is required to be programmed in Sticker/Paper Tag Format Design in advance Note2: Check box select tag and item to be send display for updating tag display Note3: Press button, to select data from available list Note4: Press [BACK] button to exit and return to Search Item Display screen iii) Blinking Screen Press [BLINKING SCREEN] button to
a) [START] button - to start blinking tag display b) [STOP] button - to stop blinking tag display c) [PAGE NUMBER] selection - to select page of tag to be displayed after stop blinking operation. Note1: Check box select tag and item to be send display for updating tag display Note2: Press button, to select data from available list Note3: Press [BACK] button to exit and return to Search Item Display screen 16.
Press [LOG NAK] button to view list of tag with acknowledgment error for 1st screen of tag When the Info base did not receive acknowledgment from the tag during updating, it will record the tag info on the list a) [SEND 1ST W/O SYMBOL] button - to send the 1st screen numeric/digits data, without symbol e.g. decimal point, Sales message and etc to selected tag b) [SEND 1ST W/ SYMBOL] button - to send the 1st screen numeric/digits data, with symbol e.g.
Note2: Press [BACK] button to exit and return to Listing Item Screen 17.
Note1: Check box select tag and item to be send display for updating tag display Note2: Press [BACK] button to exit and return to Listing Item Screen 18.
Note1: Sticker type is required to be programmed in Sticker/Paper Tag Format Design in advance Note2: Check box select tag and item to be send display for updating tag display Note3: Press button, to select data from available list Note4: Press [BACK] button to exit and return to Listing Item screen 19.
Press [VIEW EXTRA SCREEN] button to set tag displaying screen a) [VIEW 2ND] button - to set tag to be display in 2nd Screen b) [VIEW 1ST] button - to set tag to be display in 1st Screen Note: Press [BACK] button to exit and return to Listing Item screen Note1: Press button, to select data from available list
Note2: Click box to enter desired data Note3: Press [CLEAR] button to clear data retrieved or entered Note3: press Maintenance screen.
MANUAL KEY IN BARCODE DATA [Home] [Up] Barcode data (EAN) can be manually key-in using keyboard, but required to key in as bellow table. And depend on the number of digits entered, the system will consider the barcode used as the barcode type and search data within a valid number configuration. No. Keyboard Entered Digits Valid Number Barcode Type 1. 13 digits 13 digits EAN-13 2. 12 digits 0 + 12 digits / 12 digits UPC-A 3. 11 digits 00 + 11 digits / 11 digits UPC-A 4.