USER MANUAL WIRELESS RF DEVICE HT-01 AND HTBS-01 SERIES Tentative Edition COPYRIGHT © 2004 TERAOKA WEIGH-SYSTEM PTE LTD
Table of Content 1. i) Notice .................................................................................................................................................1 ii) Safety Information ..............................................................................................................................2 iii) Safety Regulations .............................................................................................................................3 General .................
i) Notice DIGI® The material contained in this document is proprietary and for information only and is subject to change without notice. Teraoka Weigh-System assumes no responsibility for any errors or damages arising from misinterpretation of any procedure. Screen displays, operating procedures and supporting features might vary with different software version releases. This document shall not be reproduced whether in part or whole without the written consent from Teraoka Weigh-System Pte Ltd.
ii) Safety Information The operator of the equipment shall comply with the safety and warning indications and procedures outlined in this document. Teraoka Weigh-System Pte Ltd assumes no responsibility or liability for failure to comply with these requirements. . For continued protection against fire hazard replace only with battery of same rating and type. . Avoid overloading the product beyond its rated maximum capacity .
iii) Safety Regulations Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
HI Touch Unit and Base Station User Manual 1. General 1.1 Product Features 1.1.1 HT-01 (Hi Touch RF Tag) Model : HI TOUCH Dimension (in mm) : 95.5(L) X 36.0(W) X 20.0(H) RF Standard : IEEE 802.15.4 Modulation : O-QPSK with DSSS Frequency Band : 2.4 GHz – 2.4835 GHz Radio Operation Channel : Channel 11 to 26 The RF Frequency of channel k is given by : Fc = 2405+5(k-11)MHz, k=11,12….
HI Touch Unit and Base Station User Manual 1.2 Operating Specification 1.2.1 HT-01 (Hi Touch RF Tag) Power Source : DC 3.0V (Internal Battery) Operating Temperature : -20 °C to 40 °C Humidity : 95% max non condensing 1.2.2 HTBS-01 (Hi Touch Base Station) Power Source : 5.0V external. Operating Temperature : -20 °C to 40 °C Humidity : 95% max non condensing Battery Type : Lithium Manganese Dioxide Batteries Nominal Voltage : 3.
HI Touch Unit and Base Station User Manual 2. 2.1 Dimension HT-01 (Hi Touch RF Tag) Note: For Japan Model only, the Logo is TERAOKA 2.
HI Touch Unit and Base Station User Manual 3. 3.
HI Touch Unit and Base Station User Manual 3.
HI Touch Unit and Base Station User Manual 4. Hi-Touch Operation with SM-700 Scale (Example) RF 2.45GHz RF 2.45GHz RF 2.45GHz RF 2.45GHz Communication Via RS232 SM 700 DIGI DIGI DIGI DIGI RF 2.45GHz DIGI RF 2.45GHz DIGI RF 2.45GHz RF 2.45GHz HI –TOUCH BASE STATION DIGI DIGI HI TOUCH RF TAG Operate Procedure 1. Power on scale, after 2 to 3 minutes, it will show the main menu. 2. Press Registration button to enter registration mode. 3. Press Hi touch button to enter hi touch mode. 4.
HI Touch Unit and Base Station User Manual 7. If the hi touch tag input is more than 4, the preset button will appear on the next screen. You can use the arrows to go to next page or previous page. 8. If the preset button is not used, after time out it will disappear from the screen. 10 9. To print label, put weight on platter, select preset button and press print key on the mechanical key pad. A label will be printed and the preset key will be disappeared from the screen.
HI Touch Unit and Base Station User Manual 5. Revision Records Serial No.