TABLE OF CONTENTS INTRODUCTION QUICK START GUIDE BASIC OPERATION GUIDE Power On/Off Recording fells Deleting files.
Recording Monitor Auto save VOR Mode Auto Record Settings Standby Mode Back light Date and Time Password switch Change Password Language Information Format David Factory Settings Music Last played All Songs Artists Albums Folders Book TROUBLESHOOTING
INTRODUCTION Thank you for purchasing a PREDICTOR X200 Digital Voice Recorder. If for any reason you ara not completely satisfied with your purchase ar have any questions, please visit www PREDICTOR We care about our customers more than anything and are always hers to serve you o 1 PREDICTOR X200 2 Earphones 3 User Manual 4. Charging/Data cable 5.
Display Record/ Save Headphone jack Rawer Previous/ Fast Forward Play/Pause Next/.
QUICK START GUIDE Petition Power ON Insertion Press and hold the POWER button for 2 seconds. You will see the “WELCOME” message and the device will turn ON. Recording Pause reconciling Stop recording Press and hold the REC button for 2 seconds. You wil ses the "Please Walt. * message and the recording will start. While recording press the PLAY piton one time Press tha REC button for 2 seconds, the recording will stop and save.
Play Nox Play Previous Far forward Fast backward Volume « Volume ‘60 back Operation While playing the record or audio file press the PLAY button one time. Press NEXT while rivaling the fle. Press PREVIOUS while playing the file. Bries Bnd hoi NEE Whi para tha le 12% long of necessary) Press and hold PREVIOUS while playing the file {as long as necessary). Press + button while paving the fle. Press button while playing the file. Brisk ihe BACK Blithe 0 od Baez ie ie Previous screen / Mem section.
BASIC OPERATION GUIDE POWER ON/OFF Crass and hold the POWER button for 2 seconds, and the device will tum ON. (if the device is nat being used for more than minutes, it will tum to Standby Mode automatically by default. Please refer to the Standby timer section of this manual} Press and hold the POWER button for 3 seconds, and the device will turn OFF. RECORDING FILES 1) Place the Recorder in a way so that its built-in microphone (bottom part of recorder) is pointed toward the recording source.
(Please refer to the Ra cording Settings section of this manual for detailed instructions. 3) Press PLAY to pause the recording.
5) Select Delete if you want to delete this particular recording, or select Deletes all to delete al recordings and press PLAY. 8) Select YES and press PLAY to confirm. 7) The recording/recordings will be deleted. Option 2: Delete anneal audio files. 1) By using the NEXT and PREVIOUS buttons navigate to the Music menu. Press the PLAY button, and you will hit All Songs. Press PLAY to see the lst of audio files 2) Select an audio fail and press PLAY. 3) Listen to the song for | second.
2 TRANSFERRING FILES TO A COMPUTER : You can transfer the files and folders from your PREDICTOR X200 to a computer and back. 1) Connect the X200 to your computer using the supplied Micro-USB cable 2) The PREDICTOR X200 will appear In your Computer Menu as an external drive (Just like an ordinary flash-directive. 2) Drag and rap the files or folders you want to edit.
1 playback of recordings 1) By using the NEXT and PREVIOUS buttons, find Recordings and press PLAY. You will hit Library. 2) Press PLAY to open the list of all available recordings 3) By using the NEXT and PREVIOUS buttons, select the extraordinaire fell you iciness 4) Press PLAY to start the playback. 2. Playback of auricle files 1) By using the NEXT and PREVIOUS buttons, find Music and press PLAY. 2) From the list of options, select All Songs and press PLAY.
3. Extemporaneous and Fast forward/Fast backward Press NEXT while playing the file to switch to the NEXT recording/audio file: Press PREVIOUS while playing the file to switch to the PREVIOUS electrocardiogram fie. Press and hold NEXT while playing the file (as long as necessary) to FAST FORWARD. Press and hold PREVIOUS while paying the file (as long as necessary) to FAST BACKWARD. 4. Volume Settings Press + or while playing the file to adjust the volume. 5. A-B repeat function 1.
3) By using the NEXT and PREVIOUS buttons, choose Repeat Cycle and press . 4) Use the + and buttons to adjust the value and press PLAY to confirm 2. You can choose the length of time intervals between the A-B slot cycles playback. from 1to 10 seconds. The default value Is 1'second. To set up the Interval between A-B cycles: 1 During the playback, press and half PLAY for two seconds. The Options menu will appear. 2) By using the NEXT and PREVIOUS buttons, find Repent Settings and press PLAY.
3. To set up the A-B repeating soot: 1) During the playback, press and hold PLAY for two seconds. The Options menu will appear 2) By using the NEXT and PREVIOUS buttons, choose Repeat Settings and press PI 3) By using the NEXT Sd PREVIOUS buttons, choose Repeat Mode and press PLAY. 4) The display will switch back to the Playback window. The A letter on the screen wil start flashing. Press NEXT to select the starting paint of A-B repeating slot. 5) The B letter on the screen will start flashing.
MENU OPTIONS RECORDINGS = Press NEXT or PREVIOUS to find Recordings. Press PLAY to enter the Recording menu ‘There are options: 1. Recordings Library 2. Recording Format 3 Nitrate. 4. Mic Sensitivity Recording Monitor 6. Auto rave 7. VOR Mode 8. Auto Recording 1. Recording Library In the Recordings menu, find the Recordings Library by pressing NEXT and PREVIOUS and press PLAY.
Ja will get back to the Recordings menu If there are some saved recordings, you will see a full list of all saved recordings. 2 Record Format in the Recordings menu, select the Recording Format by pressing NEXT and PREVIOUS and press PLAY.
For the WAV format, there are 256, 512, 768, 1024 and 1536 bps For the MP3 format, there are 32, 84, 128 and 192 bps. Use the NEXT and PREVIOUS buttons to navigate the menu and press PLAY to select the corresponding option. After you press PLAY, the system will save the settings and get back to the previous menu section. 4. Mic Sensitivity This option defines the microphone sensitivity. The “default* level of the Mic sensitivity Is 7.
After you press PLAY, the system wil save the settings and get back to the previous men section 5. Recording Mont tor There are 2 options: on off When ON, you can use earphones to listen to what It Is being recorded. It Is used to evaluate whether the recording quality and recording settings ara ideal for the current environment. Use the NEXT and PREVIOUS buttons to navigate the menu and press PLAY to select the corresponding option.
tunes It © minute is selected, the recording will be automatically saved when the file size reaches the 26. Use the NEXT and PREVIOUS buttons to navigate the menu and the PLAY button to select the corresponding option. After you press PLAY, the system will save the settings and get back to the previous menu section FAVOR Mode There are 3 options: VOR On/Off VOR Sensitivity VOR Delay Usa tha NEXT and PREVIOUS buttons to navigate the many and pass PLAY.
space. You can start recording manually or in Auto mode (please refer to the corresponding section below of this manual). You will have to press the REC button to save the recording when it's done. There are 2 options: -off -on Use tha NEXT and PREVIOUS buttons to navigate the many and press PLAY to select tha corresponding option.
-5 -6 Qs the less sensitive level, while 7 Is the most sensitive. Use the + and buttons to set the value and press PLAY to select the corresponding option. After you press PLAY, the system will save the settings and get back to the previous menu section. VOR Delay ‘This option sts tha length of time for which the external sound is continuously recognized as a condition to start the = recording in VOR mode. The default setting is 3 seconds. ‘Thea ars options from © to 10.
the Manuals correspond There are options: Auto Record on/off Start time -End time Auto Record Cycle section for details) Use the NEXT and PREVIOUS buttons to navigate the menu and press PLAY to salacity the corresponding option. Auto record on/off There are two captions: off on Use the NEXT and PREVIOUS buttons to navigate the menu and press PLAY to select the corresponding option. After you press PLAY, the system wil save the settings and get back to the previous menu section.
Start Time Use the + and buttons to adjust HOURS (HH). Use the NEXT button to switch to MINUTES (MM). You can press NEXT again to get back to the HH settings. Use the + and buttons to adjust MINUTES (MM). Crass PLAY to confirm After you press PLAY, the system will save the settings and get back to the previous menu section Use the NEXT and PREVIOUS buttons to navigate the menu and press PLAY ta select the corresponding option. End Tums Use the + and buttons to adjust HOURS (HH).
Once Daily (alarm will play each day) Working Days (alarm wil play farm Mandy to Friday) Use the NEXT and PREVIOUS buttons to navigate the menu and press PLAY to select the corresponding caption. Once iF ya choose the Once option, you will need to Faust the day in the calendar. se the + and buttons to adjust the YEAR and press NEXT ta switch to Mi Use the + and buttons to adjust the MONTH and press NEXT to switch to DAY.
SETTINGS In the Man Menu, choose Si by pressing NEXT and PREVIOUS. Press PLAY to enter the Settings Menu. There are options: } Andes Mode i Date and Tami 4. Password ice ° Fa dory Settings 1. Standby Mode in the Settings menu, ind the Standby Mode by pressing NEXT and PREVIOUS and press PI FR finch i asd to p Program the period after which the PREDICTOR X200 wail go to Standby mode automatically. There are options from 2 to 99 minutes, Use the + and buttons to adjust the value and press PLAY ta confirm.
2 Back light timer Thea ars options: 10 seconds 30 seconds -1 minute Always on Use the NEXT and PREVIOUS buttons to navigate the menu and press PLAY to select the corresponding caption. After you pass PLAY, the system will save the settings and get back to the previous menu section. 3. Date and Time This function is used to set up the correct date and time.
Use the NEXT and PREVIOUS buttons to navigate the menu and press PLAY to select the corresponding option Set Time. Use the + and buttons to adjust HOURS (HH). Use the NEXT button to switch to MINUTES (MM). You can press NEXT again to get back to the HH settings. Use the + and buttons to adjust MINUTES (MM). Press PLAY to confirm. After you press PLAY, the system will save the settings and get back to the previous menu section. Sot Data Use the + and buttons to adjust YEAR (YY).
4. Password Switch This option is used to protect the X200 with a 4-digit password. By default, this option is GFF In the Sat tings menu, find Password Switch by pressing NEXT and PREVIOUS and press PLAY. There are options: “oN Of With this function ON, you will need to input a 4-digit password before you enter the system. By default, the per-installed password is 6000. S. Change Password The Password Switch should be turned ON before making adjustments (please refer to the previous Menu section).
6. Language After changing the language, all text warnings and menu options will be displayed Ina new language. The changes will be applied Instantly: In the Settings menu. find Language by pressing NEXT and PREVIOUS and press PLAY. Thea are 17 languages Installed. Use the NEXT and PREVIOUS buttons to navigate the menu and press PLAY to select the corresponding language. 7. information This section contains the data about your PREDICTOR X200, such as Model, software version, etc.
8. Format Device This option will format the disk and erase all the data on the device. Please make sure to back up all important files to avoid any loss. In the Settings menu, find Format Device by pressing NEXT and PREVIOUS and press PLAY. There are options: Yes -No Use the NEXT and PREVIOUS buttons to navigate the menu and press PLAY to select the corresponding option. Yes The formatting will start immediately.
However, we recommend backing up all important files to avid any loss. In the Settings menu, find Factory Settings by pressing NEXT and PREVIOUS and press PLAY. There are options: Yes No Usa the NEXT and PREVIOUS buttons to navigate the menu and press PLAY to select the corresponding option. Yes The restoring will start Immediately. It takes 2 few seconds. No The Recorder will automatically get back to the previous menu MUSIC Find Music by pressing NEXT and PREVIOUS.
2. All songs. = This option displays the full list of all audio files that are transferred to the PREDICTOR X200 memory, except recorded ones. In the Music menu, select All songs by pressing NEXT and PREVIOUS and press PLAY. Audio flies Usa the NEXT and PREVIOUS buttons to navigate the list of files and pass PLAY to select the corresponding music fail.
Usa the NEXT and PREVIOUS buttons to navigate the menu and press PLAY to select the corresponding caption After you press PLAY, the system will save the settings and get back to the Previous menu section ‘Sound Settings ‘This section defines the audio parameters of the playback.
Electronic Use the NEXT and PREVIOUS buttons to navigate the menu and press PLAY to select the corresponding option. After you press PLAY, the system will save the settings and get back to the previous menu section. Playback speed This option allows to set up the playback speed. The default speed rate is +0.
eit The display will switch back to the Playback window. The A letter on the screen will start flashing. Press the PREVIOUS button to select the starting point of A-B repeating slot. The B Natter on tha screen will start flashing Listen to the recording and press tha recording and press the PREVIOUS button to select the final point of AB repeating soot. ‘The A-B repeating soot will start playing in a few seconds (depends on the Replay Interval settings). Press the PLAY button to exit the repeating mode.
press PLAY. Use the + and buttons to adjust the values and press PLAY. After you press PLAY, the system will save the settings and get back to the previous menu section. Delete Note: Once a file is deleted, you CAN NOT restore it This option allows to delete the file which is being reproduced at this moment. Use the NEXT and PREVIOUS buttons to find this option and press PLAY.
This option allows to delete all the files (except recordings), which are stored in X200 Internal memory. Use NEXT and PREVIOUS buttons to choose this option and press PLAY. ‘There are options: Yes “Ne Use the NEXT and PREVIOUS buttons ta navigate the menu and press PLAY to select the corresponding option. Aes in the library will be deleted Immediately: It may take a few seconds.
‘There will be the Unknown Album folder for the files without the information about the album FOLDERS This option wil display all the folders and files stored in X200 internal memory. Usa the NEXT and PREVIOUS buttons to navigate the menu and press PLAY to select the corresponding file or folder. Crass BACK to return to the previous Menu section BOOK This section allows to read/view text files, stored in X200 internal memory. The ‘acceptable format is TXT any.
a TROUBLESHOOTING : Problem Solution Not posting on Make sure tha PREDICTOR X200 Is fully charged. Charge for 2 hours, If necessary. Setting are not Restore the X200 back ta the Factory Settings working properly Set up the desired options again.
Prob ism Disk error Satiation Transfer all flies from PREDICTOR X200 to your computer. Format the device. ‘Wrong password/ Forget the password ‘Turn the recorder OFF, then tum it ON again Use master-password Press and hold the PLAY button for 3 seconds. Alter entering the system this way, the password will be automatically reset to and the Password mode will be OFF.
MAINTENANCE CHARGING PREDICTOR X200 is enabled with the rechargeable Li-ion Battery. One full battery charge provides up to 17 hours of recording time. To charge the Recorder, plug one end of the supplied cable into the Micro-USB. charging port Plug the other end of the charging cable into a standard USB port It takes up to 2 hours to charge it fully. Be sure to use the 5V DC, 05-1 adapter or charger. Using a power source with lower power will increase the overall charging time.
SAFETY RULES Don't disassemble or modify the Recorder for any reason. Doing this may cause It to malfunction ar explosion. The damage of your device can cold the manufacturer's warranty. Make sure PREDICTOR X200 is completely dry before charging. Charging a wet device may cause serious damage Clean only with a dry cloth. Av old exposing PREDICTOR X200 to extreme temperatures (below 37°F / 3°C or above 12°F / 45°C).
RECYCLING ‘The recorders can be recycled, and they should be in order ta keep our planet clean Where should you bring then? In the US, there is a couple of options: 1) Best Buy has a recycling program. Just aka a broken device when you visit a Bast Buy sorta.
THANK YOU We truly appreciate that you chose PREDICTOR as your trusted brand of digital vocal recorders Gur team sincerely hopes you enjoy the seamless usability PREDICTOR X200 provides. We love making our customers happy by providing true value to our products.