FCC TEST REPORT Report No.: EMC-FCC-R0077 http://www.emc2000.co.kr Appendix 6. User manual EMC compliance Ltd. 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval.
R OWNER'S MANUAL 2-DIN, 7"Touch screen vehicle monitor for allround vision Model : MXN-7DDT Design and Specifications are subject to change without notice.
2-DIN, 7"Touch screen Monitor Model : MXN-7DDT Instruction Manual (Ver 1.0) Index 1. Caution 2. Components of the product 3. How to use the product 4. How to install the product 5. Specification Thank you for purchasing our touchscreen vehicle monitor. Please read this manual before you use the product. The product may be different than described in the manual; depending on renewal and/or upgrade of S/W version and performance it can be altered without notice.
Caution For your safe operation, please read this manual before you start to use the product. We inform you that our company shall not be responsible for failures and troubles that are occurred due to misuse or neglection of the cautions written on this manual. Operating this equipment when driving a vehicle might cause an accident. Use the equipment after parking or stopping the vehicle in a safe area. When wiping off the dust, use a soft fabric instead of liquid solvents (thinner, benzene etc.
Components of the product 2 3 1 6 5 7 4 1 Touch Screen By touching one of the small pictures during multi screen mode, the concerning small picture will be enlarged into Full Screen mode. By touching the screen it is possible to control the equipment or to change the settings. 2 Power On/Off Press the Power button for 0.5 seconds to turn on the screen. Press the Power button for 0.5 seconds to turn off the screen when it is tuned on.
Components of the product 4 Power Input Connect the Power Cable ( VCC/GND/TRIGGER1~TRIGGER5/Speed Switch ) 5 Camera Input Connect the Camera Cable ( Cam1 ~ Cam4 ) 6 AV In/Out AV IN: AUX1 & AUX2 (RCA), AV Out (RCA) 7 Ext.Speaker output / Mic. input Connect the external speaker (left side terminal) Connect the optional microphone (right side terminal) Package Contents Please check that you have the correct contents before using this product. If any items are missing, please contact your dealer.
How to use the product Start Screen When the booting is ready, the multi screen as below will be displayed When the small window is touched, it is enlarged. When the small windows on the multi screen are touched, the channel is enlarged into full screen mode. One more touch returns it back to the multi screen mode.
How to use the product Volume Control Press the button to display Volume Pop-up.
How to use the product Input selection Press the Input button to change Input Press input button 3 times: Cam Press input button once: AUX1 Press input button twice: AUX2 8
How to use the product Multi screen Press the multi screen button to divide the screen.
How to use the product Setting Mode Press the setting menu button to open the Setting screen.
How to use the product Display Input the name into each channel.
How to use the product Display Setup screen position of each channel Caution: Cam1and AUX1 cannot be setup at the same time. Cam2 and AUX2 cannot be setup at the same time. Setup the screen on each Trigger Mirror : Mirror image or normal image Up : Change up and down of the screen Shutter : Enable to operate Shutter/Heater Camera The screen will be showed screen by each Trigger set if input Trigger.
How to use the product Display Display the full screen according to each channel setup when setting up On Display the dividing lines of the screen 13
How to use the product Display Adjust Parking line of each Trigger Calibration Front & Rear Trig.
How to use the product Function The screen is turned ON automatically when starting the vehicle Automatic brightness adjustment by sensor in the front housing Sensitivity of automatic brightness adjustment, level 0 to 10 controlled by actual light conditions (Day/Night) 15
How to use the product Function Keep Trigger activated during setup time after Trigger off in order to bridge temporary powerloss, e.g. from vehicle's turnlight signal Re-adjust center Point of Touch panel STEP 1 of 3 Click on center of '+' icon for Touch screen calibration.
How to use the product Function Detect speed of a vehicle from 10 to 200 Hz To switch automatically into the screen ON mode, by detecting a speed signal (tacho signal) 17
How to use the product System Set time displaying the Menu screen Set time displayed on the screen The screen is turned off when there is no input like touching it or so during setting up time 18
How to use the product System Set a password to lock the Menu button Support languages for each country ( Option ) 19
How to use the product System Initializing set points of Menu Display Firmware Version and Model name 20
How to use the product Bluetooth Phone (Optional) Press the button to start Bluetooth Screen of Bluetooth start Start-up screen displays the Phone Book list of the phone paired : Displays call lists during absence : Displays phone call lists received : Displays phone call lists sent : Use for making a call dialing numbers : Displays a Phonebook list : Setup of Bluetooth : Finishes Bluetooth 21
How to use the product Bluetooth Phone (Optional) Enter the Paring Mode for Paring with Bluetooth by pressing the 1. Pairing mode is set by pressing the button button. 2. Connect Bluetooth to a cell phone you want searching Bluetooth device. (Enter the Pin code depending on type of cell phones) 3. Message is displayed when it is connected as below. 4. Return to the start-up screen of Bluetooth by pressing the 22 button.
How to use the product Bluetooth Phone (Optional) : Displays devices Paired.
How to use the product Bluetooth Phone (Optional) Down load phonebook list after pairing succeed. Call after press the number in the list.
Installation Pre-Installation Please make sure to disassemble the monitor and trim bracket before installation. 1. Insert the ejection keys into the monitor along the guides on either sides. 2. Pull the monitor out from the trim bracket.
Installation Installation 2 1 Dash Board 5 Trim Bracket 3 Deco Plate Monitor Sunvisor 4 Power Cable, Cable Bracket, Cameras Installation Overview 1 Deco Plate + Trim Bracket 26
Installation Installation 2 Trim Bracket Dash Board a. Insert trim bracket into dash board. b. Fix trim bracket firmly with the supplied screw. ( top and bottom ) c. Bend the taps.
Installation Installation 4 Power Cable, Cable Bracket, Cameras Monitor + Cable Bracket Monitor + Screw Please make a connection for power cable, camera cables, cable bracket before installation of monitor and trim bracket.
Installation Disassemble Please disassemble the unit in reverse of installation.
Installation System Connection EXT.Speaker EXT.MIC VIDEO AUDIO B3 RED (CAM AUDIO) 2 3 4 5 6 7 8 4 8 7 6 4 3 2 5 1 CAMERA4 3 CAMERA3 2 CAMERA2 CAMERA1 AUDIO IN/OUT VIDEO IN/OUT 1 1 B2 BLUE (CAM+9V) B4 YEL (CAM VCC) B1 WHT (CAM VIDEO) B5 GND (SHX2) Power Cable ( 2M·100mm ) No Wire Color Label 1 RED Power ( 12~30V DC, via ignition ) 2 GREEN Trigger1 ( 9~30V DC, via direction light, etc. ) 3 BLUE Trigger3 ( 9~30V DC, via direction light, etc.
Specification LCD : Built in 7˟ TFT LCD (WVGA 800x480, with Touch Panel) Camera : 4Ch input (1 Vp-p, 75˟) /NTSC, PAL ( Video & Audio ) Video Output : CVBS 1 Ch. (1 Vp-p, 75˟) /NTSC, PAL Audio Output 1Ch (RCA) External speaker Output ( +,- 2pin / Max 3.1V @ 8 Ohm Speaker ) Video input : AUX1, AUX2 ( RCA ) 5 Trigger inputs (Cable Input : 12 ~ 24V) ALS Sensor (Night & Daytime Brightness detection) Power : 12~30Vdc (12Vdc 1.3A) Operating Temp. : -20 ~ 60 Storage Temp.