USER'S GUIDE USB HARD DRIVE DPD-10 SERIES We appreciate for purchasing our USB Hard Drive. Before using it, please read this User's Guide carefully and retain it for future reference.
INFORMATION TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
INDEX 1. Before Use................................................................................ 2 2. Parts ......................................................................................... 3 3. What is USB Hard Drive?..........................................................4 4. Installation / Remove of USB Hard Drive Windows ME, Windows 2000 and Windows XP..................................... .5 Windows 98 and Windows 98 SE ..................................................... .6 Mac OS 9.
Before use Before use, please be fully aware of this User's Guide. This user guide is explaining and informing users to operate it in correct way so that users can avoid potential damage in property and safety. - Caution Please do not use or place the product at the below circumstance, it will cause trouble of the device. 1. Do not put it in location getting influenced of strong vibration or shock. 2. Much dust or high humidity place (Like Bathroom). 3.
Parts (1) (2) (3) (4) (5) 1. Cap 2. USB PLUG 3. LED Indicator 4. Writing Protector Switch: Before you insert the product into USB port, please select the switch. Caution: While the product is being plugged in USB port, the switch does not work 5.
What is USB Hard Drive? To use USB Interface and Flash Memory, it is portable and mass capacity storage device that allows to storage and transport data in easy and quick way. Just plugging it into USB port, you are able to read and write data. As electricity supplied from USB port of PC, there is no need of battery or extra power supply for USB Hard Drive. USB Hard Drive operates in P & P (Plug-N-Play), you can use it Window ME, Window 2000, Window XP as well as Mac 9.
Installation / Remove of USB Hard Drive Windows ME, Windows 2000 & Windows XP OS 1. Please Start your OS (Windows ME, Windows 2000 or Windows XP). 2. Uncover the Cap from the device, and then insert it into USB port on your PC or Notebook. Just to plug, your PC will discover USB Hard Drive by itself and will install the necessary drivers automatically. After the first installation, it is unnecessary to install again. 3.
3. "Safe to Remove Hardware" will appear, please click "OK". 4. Then, you can remove USB Hard Drive from the USB Port. - Caution When Red Light of LED Indicator is blinking, please do not remove USB Hard Drive from USB Port. It will cause to loss, break data or damage FAT table. If the above happened and error message was found, please format(Quick format) it again. Then you can use it.
2. Uncover the Cap from the device, and then insert it into USB port on your PC or Notebook. 3. The following Dialog Box "Add New Hardware Wizard" will appear in your PC. Click "Next" 4. The following Dialog Box will appear. Select "Search for the best drive for your device. [Recommend], and then click "Next" 5. Please put "Installation CD" into CD-Rom.
6. The Following Dialog Box will appear. Please select "CD-ROM drive" and then click "Browse...(R)". 7. Please find CD "Data Bank", select the folder named "Driver" as below, and then click "OK".
8. The following Dialog Box will appear and then click "Next". 9. The following Dialog Box will appear and then click "Next".
10. The installation will be continued. Click "Finish", the installation will finish. Remove USB Hard Drive from USB Port. 1. First, close file or folder being used. 2. You can then remove USB Hard Drive from the USB Port. - Caution When Red Light of LED Indicator is blinking, please do not remove USB Hard Drive from USB Port. It will cause to loss, break data or damage FAT table. If the above happened and error message was found, please format(Quick format) it again. Then you can use it.
Mac OS 1. Please Start MAC OS. 2. Uncover the Cap from the device, and then insert it into USB port of your PC or Notebook. Just to plug, your PC will discover USB Hard Drive by itself and will install the necessary drivers automatically. After the first installation, it is unnecessary to install again. 3. When the installation is finished, you can see icon named "Untitled" on your PC. 4. You can read, write and delete files in the same way as any other Drive.
Remove USB Hard Drive from USB Port 1. First, close file or folder being used. 2. Please draw the file named "Untitled" into "Recycle Bin". 3. You can then remove USB Hard Drive from the USB Port. - Caution Mac 9.0 OS does not support "FAT Format" that Windows OS supports. If users want to use this device in Mac 9.0 OS, please format it in Mac OS and you can use it then. Users cannot use it in both OS of Mac 9.0 and Windows 98 (or Above) at same time.
If there is Universal Serial Bus controller: Please check whether USB hard drive is set up with unknown device or not. If it was set up with unknown device, please click "delete Button" and finish delete. Please try to install driver again. If Universal Serial Bus controller is not set up, Please verify "New Hard Ware " in Controller Panel and try again to install. Q. What should I do if I do not see "Removable Disk" in "My Computer" after I have plugged USB Hard Drive into USB Port? A.
Q. What happens if I want to read my USB Hard Drive on another computer and the drive is not with me? A. What makes the USB Hard Drive so unique is that if OS is Windows 2000, ME or Mac 9.0, no drivers are required. If the other OS is 98 or 98 SE, you can download the necessary drivers from our website www.diasonic.com. Q. What should I do if my computer "locks up" after plugging USB Hard Drive? A. Remove your USB Hard Drive, and reboot your system.
it causes breakage of data. Hence it is hard to carry. So USB Hard Drive is the ideal product for people who often travel and move with data as it is compact size and solid. Q. Can I set password to a file that I want to save? A. On most of word processing program, they have function to set password. After setting password, it will be protected from others accessing without correct password. Q. I formatted USB Hard Drive in NTFS, can I use it on another OS? A.
Specification Model Capacity Data Bank (DPD-10 Series) 16 MB / 32 MB / 64 MB / 128 MB 256 MB / 512 MB / 896 MB / 1 GB Interface USB Specification 1.1 Reading Speed 900 KB / S Writing Speed 500 KB / S Writing Protector External Switch Power Supply From USB PORT (4.5V ~ 5.5V) Operating Current 36 mA Suspend Current 200 uA LED Indicator Data Retention Operating Temp. Green: When plug in USB Red: When accessing Over 10 years 0 °C ~ 45 °C Dimension 80.5 x 20 x 10 (L x W x H) Weight Approx.
Warranty Information Limited Warranty Diasonic Technology Co., Ltd. warrants that this product is free from defective material and workmanship. Diasonic Technology Co., Ltd. further warrants that if this product fails to operate properly within the specified warranty period and the failure is due to improper workmanship or defective material, Diasonic Technology Co., Ltd. will repair or replace the product at its option.
